|
<!--
***********************************************************************************************
Microsoft.NET.Sdk.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (c) .NET Foundation. All rights reserved.
***********************************************************************************************
-->
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Import Project="Microsoft.NET.Sdk.Common.targets" />
<PropertyGroup>
<EnableDynamicLoading Condition="'$(EnableDynamicLoading)' == '' and '$(EnableComHosting)' == 'true'">true</EnableDynamicLoading>
</PropertyGroup>
<ImportGroup>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.PackageDependencyResolution.targets" Condition="Exists('$(MSBuildThisFileDirectory)Microsoft.PackageDependencyResolution.targets') and ('$(Language)' != 'C++' or '$(_EnablePackageReferencesInVCProjects)' == 'true')" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.PackageDependencyResolutionStubs.targets" Condition="Exists('$(MSBuildThisFileDirectory)Microsoft.PackageDependencyResolutionStubs.targets') and ('$(Language)' == 'C++' and '$(_EnablePackageReferencesInVCProjects)' != 'true')" />
</ImportGroup>
<Import Project="Microsoft.NET.Sdk.DefaultItems.targets" />
<Import Project="Microsoft.NET.Sdk.FrameworkReferenceResolution.targets" />
<UsingTask TaskName="GenerateDepsFile" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<UsingTask TaskName="GenerateRuntimeConfigurationFiles" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<UsingTask TaskName="GetAssemblyVersion" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<UsingTask TaskName="GenerateSatelliteAssemblies" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<PropertyGroup>
<DisableStandardFrameworkResolution Condition="'$(DisableStandardFrameworkResolution)' == ''">$(_IsNETCoreOrNETStandard)</DisableStandardFrameworkResolution>
</PropertyGroup>
<PropertyGroup>
<GenerateRuntimeConfigurationFiles Condition=" '$(GenerateRuntimeConfigurationFiles)' == '' and '$(TargetFrameworkIdentifier)' == '.NETCoreApp' and ('$(HasRuntimeOutput)' == 'true' or '$(EnableComHosting)' == 'true' or '$(EnableDynamicLoading)' == 'true') ">true</GenerateRuntimeConfigurationFiles>
<AlwaysIncludeCoreFrameworkInRuntimeConfig Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionLessThan('$(TargetFrameworkVersion)', '6.0'))">false</AlwaysIncludeCoreFrameworkInRuntimeConfig>
<AlwaysIncludeCoreFrameworkInRuntimeConfig Condition="'$(AlwaysIncludeCoreFrameworkInRuntimeConfig)' == ''">true</AlwaysIncludeCoreFrameworkInRuntimeConfig>
<UserRuntimeConfig Condition=" '$(UserRuntimeConfig)' == '' ">$(MSBuildProjectDirectory)/runtimeconfig.template.json</UserRuntimeConfig>
<GenerateSatelliteAssembliesForCore Condition=" '$(GenerateSatelliteAssembliesForCore)' == '' and '$(MSBuildRuntimeType)' == 'Core' ">true</GenerateSatelliteAssembliesForCore>
<ComputeNETCoreBuildOutputFiles Condition=" '$(ComputeNETCoreBuildOutputFiles)' == '' and '$(TargetFrameworkIdentifier)' == '.NETCoreApp'">true</ComputeNETCoreBuildOutputFiles>
<_GenerateRuntimeConfigurationPropertyInputsCache Condition="'$(_GenerateRuntimeConfigurationPropertyInputsCache)' == ''">$(IntermediateOutputPath)$(MSBuildProjectName).genruntimeconfig.cache</_GenerateRuntimeConfigurationPropertyInputsCache>
<_GenerateRuntimeConfigurationPropertyInputsCache>$([MSBuild]::NormalizePath($(MSBuildProjectDirectory), $(_GenerateRuntimeConfigurationPropertyInputsCache)))</_GenerateRuntimeConfigurationPropertyInputsCache>
<_GeneratePublishDependencyFilePropertyInputsCache Condition="'$(_GeneratePublishDependencyFilePropertyInputsCache)' == ''">$(IntermediateOutputPath)$(MSBuildProjectName).genpublishdeps.cache</_GeneratePublishDependencyFilePropertyInputsCache>
<_GeneratePublishDependencyFilePropertyInputsCache>$([MSBuild]::NormalizePath($(MSBuildProjectDirectory), $(_GeneratePublishDependencyFilePropertyInputsCache)))</_GeneratePublishDependencyFilePropertyInputsCache>
<_GenerateSingleFileBundlePropertyInputsCache Condition="'$(_GenerateSingleFileBundlePropertyInputsCache)' == ''">$(IntermediateOutputPath)$(MSBuildProjectName).genbundle.cache</_GenerateSingleFileBundlePropertyInputsCache>
<_GenerateSingleFileBundlePropertyInputsCache>$([MSBuild]::NormalizePath($(MSBuildProjectDirectory), $(_GenerateSingleFileBundlePropertyInputsCache)))</_GenerateSingleFileBundlePropertyInputsCache>
</PropertyGroup>
<!-- For .NET 8 and higher, we will by default use a simplified "portable" RID graph -->
<PropertyGroup>
<_UseRidGraphWasSpecified Condition="'$(UseRidGraph)' != ''">true</_UseRidGraphWasSpecified>
</PropertyGroup>
<PropertyGroup Condition="'$(UseRidGraph)' == ''">
<UseRidGraph Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' AND $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '8.0'))">false</UseRidGraph>
<UseRidGraph Condition="'$(UseRidGraph)' == ''">true</UseRidGraph>
</PropertyGroup>
<PropertyGroup Condition="'$(RuntimeIdentifierGraphPath)' == ''">
<RuntimeIdentifierGraphPath Condition="'$(UseRidGraph)' == 'true'">$(BundledRuntimeIdentifierGraphFile)</RuntimeIdentifierGraphPath>
<!-- The portable RID graph should be in the same directory as the full RID graph -->
<RuntimeIdentifierGraphPath Condition="'$(UseRidGraph)' != 'true'">$([System.IO.Path]::GetDirectoryName($(BundledRuntimeIdentifierGraphFile)))/PortableRuntimeIdentifierGraph.json</RuntimeIdentifierGraphPath>
</PropertyGroup>
<ItemGroup>
<GenerateRuntimeConfigurationFilesInputs Include="$(ProjectAssetsFile)" />
<GenerateRuntimeConfigurationFilesInputs Include="$(ProjectAssetsCacheFile)" />
<GenerateRuntimeConfigurationFilesInputs Include="$(UserRuntimeConfig)" Condition=" Exists($(UserRuntimeConfig)) " />
</ItemGroup>
<ItemGroup Condition="'$(TargetFrameworks)' != '' And '$(TargetFramework)' != ''">
<ProjectConfigurationDescription Include="TargetFramework=$(TargetFramework)" />
</ItemGroup>
<PropertyGroup Condition="'$(GenerateRuntimeConfigDevFile)' == ''">
<GenerateRuntimeConfigDevFile>true</GenerateRuntimeConfigDevFile>
<!-- Post-net6.0, stop generating *.runtimeconfig.dev.json files to reduce probing paths. -->
<!-- https://github.com/dotnet/sdk/issues/16818 -->
<GenerateRuntimeConfigDevFile Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '6.0'))">false</GenerateRuntimeConfigDevFile>
</PropertyGroup>
<PropertyGroup>
<ProjectDepsFileName Condition="'$(ProjectDepsFileName)' == ''">$(AssemblyName).deps.json</ProjectDepsFileName>
<ProjectDepsFilePath Condition="'$(ProjectDepsFilePath)' == ''">$(TargetDir)$(ProjectDepsFileName)</ProjectDepsFilePath>
<ProjectRuntimeConfigFileName Condition="'$(ProjectRuntimeConfigFileName)' == ''">$(AssemblyName).runtimeconfig.json</ProjectRuntimeConfigFileName>
<ProjectRuntimeConfigFilePath Condition="'$(ProjectRuntimeConfigFilePath)' == ''">$(TargetDir)$(ProjectRuntimeConfigFileName)</ProjectRuntimeConfigFilePath>
<ProjectRuntimeConfigDevFilePath Condition="'$(ProjectRuntimeConfigDevFilePath)' == '' and $(GenerateRuntimeConfigDevFile) == 'true'">$(TargetDir)$(AssemblyName).runtimeconfig.dev.json</ProjectRuntimeConfigDevFilePath>
<IncludeMainProjectInDepsFile Condition=" '$(IncludeMainProjectInDepsFile)' == '' ">true</IncludeMainProjectInDepsFile>
</PropertyGroup>
<Import Project="Microsoft.NET.Sdk.Shared.targets" />
<PropertyGroup>
<_DefaultUserProfileRuntimeStorePath>$(HOME)</_DefaultUserProfileRuntimeStorePath>
<_DefaultUserProfileRuntimeStorePath Condition="$([MSBuild]::IsOSPlatform(`Windows`))">$(USERPROFILE)</_DefaultUserProfileRuntimeStorePath>
<_DefaultUserProfileRuntimeStorePath>$([System.IO.Path]::Combine($(_DefaultUserProfileRuntimeStorePath), '.dotnet', 'store'))</_DefaultUserProfileRuntimeStorePath>
<UserProfileRuntimeStorePath Condition="'$(UserProfileRuntimeStorePath)' == ''">$(_DefaultUserProfileRuntimeStorePath)</UserProfileRuntimeStorePath>
</PropertyGroup>
<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '6.0'))">
<PredefinedCulturesOnly Condition="'$(PredefinedCulturesOnly)' == '' and '$(InvariantGlobalization)' == 'true'">true</PredefinedCulturesOnly>
</PropertyGroup>
<PropertyGroup Condition="'$(GenerateResourceWarnOnBinaryFormatterUse)' == '' and '$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '8.0'))">
<GenerateResourceWarnOnBinaryFormatterUse>true</GenerateResourceWarnOnBinaryFormatterUse>
</PropertyGroup>
<!-- Set the IsRidAgnostic property if this project should NOT accept global RuntimeIdentifier and SelfContained
property values from referencing projects. -->
<PropertyGroup Condition="'$(IsRidAgnostic)' == ''">
<IsRidAgnostic Condition="('$(_IsExecutable)' == 'true' And '$(IsTestProject)' != 'true') Or
'$(RuntimeIdentifier)' != '' Or
'$(RuntimeIdentifiers)' != ''">false</IsRidAgnostic>
<IsRidAgnostic Condition="'$(IsRidAgnostic)' == ''">true</IsRidAgnostic>
</PropertyGroup>
<!-- Opt into .NET Core resource-serialization strategy by default when targeting frameworks
that support it by default.
-->
<PropertyGroup>
<GenerateResourceUsePreserializedResources
Condition="'$(GenerateResourceUsePreserializedResources)' == '' and
('$(TargetFrameworkIdentifier)' == '.NETCoreApp' and '$(_TargetFrameworkVersionWithoutV)' >= '3.0')">true</GenerateResourceUsePreserializedResources>
</PropertyGroup>
<PropertyGroup>
<EmbeddedResourceUseDependentUponConvention
Condition="'$(EmbeddedResourceUseDependentUponConvention)' == '' and
(('$(TargetFrameworkIdentifier)' == '.NETCoreApp' and '$(_TargetFrameworkVersionWithoutV)' >= '3.0') or
('$(TargetFrameworkIdentifier)' == '.NETStandard' and '$(_TargetFrameworkVersionWithoutV)' >= '2.1'))">true</EmbeddedResourceUseDependentUponConvention>
</PropertyGroup>
<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '2.1'))">
<AvailablePlatforms>$(AvailablePlatforms),ARM32</AvailablePlatforms>
</PropertyGroup>
<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '3.1'))">
<AvailablePlatforms>$(AvailablePlatforms),ARM64</AvailablePlatforms>
</PropertyGroup>
<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETFramework' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '4.8.1'))">
<AvailablePlatforms>$(AvailablePlatforms),ARM64</AvailablePlatforms>
</PropertyGroup>
<PropertyGroup>
<!-- Turn off support for metadata updates in non-Debug builds by default. -->
<MetadataUpdaterSupport Condition="'$(MetadataUpdaterSupport)' == '' and '$(Configuration)' != 'Debug'">false</MetadataUpdaterSupport>
</PropertyGroup>
<PropertyGroup>
<!-- Turn on IncludeProjectsNotInAssetsFileInDepsFile by default. -->
<IncludeProjectsNotInAssetsFileInDepsFile Condition="'$(IncludeProjectsNotInAssetsFileInDepsFile)' == ''">true</IncludeProjectsNotInAssetsFileInDepsFile>
</PropertyGroup>
<!--
BinaryFormatter Disabling
===========================
The EnableUnsafeBinaryFormatterSerialization setting controls both runtime and compile-time behavior.
The behavior is slightly different depending on the project type and target runtime.
If the property is explicitly set to TRUE:
- The APIs are obsolete as warning, and calls to the APIs will succeed at runtime.
If the property is explicitly set to FALSE:
- On .NET 5 & 6, the APIs are obsolete as warning, and calls to the APIs will fail at runtime.
- On .NET 7+, the APIs are obsolete as error, and calls to the APIs will fail at runtime.
If the property is not explicitly TRUE or FALSE:
- On .NET 5 & 6, the APIs are obsolete as warning, and calls to the APIs will succeed at runtime.
- On .NET 7, the APIs are obsolete as error, but calls to the APIs will succeed at runtime.
- On .NET 8+, the APIs are obsolete as error, and calls to the APIs will fail at runtime
unless the SDK has opted in to keeping legacy BinaryFormatter behavior around.
n.b. The APIs are already marked obsolete (as warning) in .NET 5, so we don't need to special-case
them unless we want to upgrade them to warn-as-error.
-->
<PropertyGroup Condition="'$(EnableUnsafeBinaryFormatterSerialization)' != 'true' AND '$(TargetFrameworkIdentifier)' == '.NETCoreApp' AND $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '7.0'))">
<!--
Certain project types need to re-enable BinaryFormatter by default; it will still be warn-as-error but will work at runtime.
WinForms: enabled through 8.0 (but not after)
WPF: enabled through 8.0 (but not after)
-->
<_ProjectTypeRequiresBinaryFormatter Condition="'$(UseWindowsForms)' == 'true' AND $([MSBuild]::VersionLessThanOrEquals($(TargetFrameworkVersion), '8.0'))">true</_ProjectTypeRequiresBinaryFormatter>
<_ProjectTypeRequiresBinaryFormatter Condition="'$(UseWPF)' == 'true' AND $([MSBuild]::VersionLessThanOrEquals($(TargetFrameworkVersion), '8.0'))">true</_ProjectTypeRequiresBinaryFormatter>
<!-- controls warn as error -->
<_BinaryFormatterObsoleteAsError>true</_BinaryFormatterObsoleteAsError>
<!-- controls runtime behavior (AppContext & trimming) -->
<EnableUnsafeBinaryFormatterSerialization Condition="'$(EnableUnsafeBinaryFormatterSerialization)' == '' AND '$(_ProjectTypeRequiresBinaryFormatter)' == 'true'">true</EnableUnsafeBinaryFormatterSerialization>
<EnableUnsafeBinaryFormatterSerialization Condition="$([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '8.0')) AND '$(_ProjectTypeRequiresBinaryFormatter)' != 'true'">false</EnableUnsafeBinaryFormatterSerialization>
</PropertyGroup>
<PropertyGroup>
<CoreBuildDependsOn>
_CheckForBuildWithNoBuild;
$(CoreBuildDependsOn);
GenerateBuildDependencyFile;
GenerateBuildRuntimeConfigurationFiles
</CoreBuildDependsOn>
</PropertyGroup>
<PropertyGroup>
<CoreCleanDependsOn>
_SdkBeforeClean;
$(CoreCleanDependsOn)
</CoreCleanDependsOn>
</PropertyGroup>
<PropertyGroup>
<RebuildDependsOn>
_SdkBeforeRebuild;
$(RebuildDependsOn)
</RebuildDependsOn>
</PropertyGroup>
<Target Name="_AddMicrosoftNetCompilerToolsetFrameworkPackage" BeforeTargets="CollectPackageReferences">
<!-- Users should not be setting Microsoft.Net.Compilers.Toolset.Framework directly.
If they do, and they also set BuildWithNetFrameworkHostedCompiler, we will have
a duplicate PackageReference. This makes it more explicit that that is not supported. -->
<NETSdkWarning ResourceName="CannotDirectlyReferenceMicrosoftNetCompilersToolsetFramework"
Condition="'@(PackageReference->AnyHaveMetadataValue('Identity', 'Microsoft.Net.Compilers.Toolset.Framework'))' == 'true'" />
<ItemGroup Condition="'$(BuildWithNetFrameworkHostedCompiler)' == 'true' and '$(OS)' == 'Windows_NT'">
<PackageReference Include="Microsoft.Net.Compilers.Toolset.Framework" PrivateAssets="all" Version="$(_NetFrameworkHostedCompilersVersion)" IsImplicitlyDefined="true" />
</ItemGroup>
</Target>
<!-- TODO: this target should not check GeneratePackageOnBuild.
remove when https://github.com/NuGet/Home/issues/7801 is fixed.
-->
<Target Name="_CheckForBuildWithNoBuild"
Condition="'$(NoBuild)' == 'true' and '$(GeneratePackageOnBuild)' != 'true'">
<NETSdkError ResourceName="NoBuildRequested" />
</Target>
<!--
============================================================
GenerateBuildDependencyFile
Generates the $(project).deps.json file during Build
============================================================
-->
<Target Name="GenerateBuildDependencyFile"
DependsOnTargets="_DefaultMicrosoftNETPlatformLibrary;
_HandlePackageFileConflicts;
_ComputeReferenceAssemblies;
_ComputeUserRuntimeAssemblies;
ResolveRuntimePackAssets;
_ComputePackageReferencePublish"
BeforeTargets="CopyFilesToOutputDirectory"
Condition="'$(GenerateDependencyFile)' == 'true'"
Inputs="$(ProjectAssetsFile);$(ProjectAssetsCacheFile);$(MSBuildAllProjects)"
Outputs="$(ProjectDepsFilePath)">
<!-- Set a dummy Version if it hasn't been set by DefaultAssemblyInfo.targets -->
<PropertyGroup Condition="'$(UsingNETSdkDefaults)' != 'true'">
<Version Condition="'$(Version)' == ''">1.0.0</Version>
</PropertyGroup>
<ItemGroup>
<ResolvedCompileFileDefinitions Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' == 'Reference'" />
<NativeCopyLocalItems Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<ResourceCopyLocalItems Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<RuntimeCopyLocalItems Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<RuntimeTargetsCopyLocalItems Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<RuntimePackAsset Remove="@(_ConflictPackageFiles)" Condition="'%(_ConflictPackageFiles.ConflictItemType)' != 'Reference'" />
</ItemGroup>
<!-- Set valid RID platforms for runtime assets if targeting .NET 8+ and using the RID graph is not enabled. -->
<ItemGroup Condition="$([MSBuild]::VersionGreaterThanOrEquals($(_TargetFrameworkVersionWithoutV), '8.0'))
and @(RuntimeHostConfigurationOption->WithMetadataValue('Identity', 'System.Runtime.Loader.UseRidGraph')->WithMetadataValue('Value', 'true')->Count()) == 0
and '@(_KnownRuntimeIdentifierPlatformsForTargetFramework)' != ''">
<!-- Known RID platforms for all target frameworks comes from BundledVersions -->
<_ValidRuntimeIdentifierPlatformsForAssets Include="@(_KnownRuntimeIdentiferPlatforms)" />
<!-- Known RID platforms for current target framework comes from ProcessFrameworkReferences output -->
<_ValidRuntimeIdentifierPlatformsForAssets Include="@(_KnownRuntimeIdentifierPlatformsForTargetFramework)" Exclude="@(_ExcludedKnownRuntimeIdentiferPlatforms)"/>
</ItemGroup>
<GenerateDepsFile ProjectPath="$(MSBuildProjectFullPath)"
AssetsFilePath="$(ProjectAssetsFile)"
DepsFilePath="$(ProjectDepsFilePath)"
TargetFramework="$(TargetFramework)"
AssemblyName="$(AssemblyName)"
AssemblyExtension="$(TargetExt)"
AssemblyVersion="$(Version)"
AssemblySatelliteAssemblies="@(IntermediateSatelliteAssembliesWithTargetPath)"
ReferencePaths="@(ReferencePath)"
ReferenceDependencyPaths="@(ReferenceDependencyPaths)"
ReferenceSatellitePaths="@(ReferenceSatellitePaths)"
ReferenceAssemblies="@(_ReferenceAssemblies)"
RuntimePackAssets="@(RuntimePackAsset)"
IncludeMainProject="$(IncludeMainProjectInDepsFile)"
RuntimeIdentifier="$(RuntimeIdentifier)"
PlatformLibraryName="$(MicrosoftNETPlatformLibrary)"
RuntimeFrameworks="@(RuntimeFramework)"
CompilerOptions="@(DependencyFileCompilerOptions)"
CompileReferences="@(ResolvedCompileFileDefinitions)"
ResolvedNuGetFiles="@(NativeCopyLocalItems);@(ResourceCopyLocalItems);@(RuntimeCopyLocalItems)"
UserRuntimeAssemblies="@(UserRuntimeAssembly)"
ResolvedRuntimeTargetsFiles="@(RuntimeTargetsCopyLocalItems)"
IsSelfContained="$(SelfContained)"
IncludeRuntimeFileVersions="$(IncludeFileVersionsInDependencyFile)"
RuntimeGraphPath="$(RuntimeIdentifierGraphPath)"
IncludeProjectsNotInAssetsFile="$(IncludeProjectsNotInAssetsFileInDepsFile)"
ValidRuntimeIdentifierPlatformsForAssets="@(_ValidRuntimeIdentifierPlatformsForAssets)"/>
<ItemGroup>
<!-- Do this in an ItemGroup instead of as an output parameter of the GenerateDepsFile task so that it still gets added to the item set
during incremental builds when the task is skipped -->
<FileWrites Include="$(ProjectDepsFilePath)" Condition="Exists('$(ProjectDepsFilePath)')"/>
</ItemGroup>
</Target>
<!-- To achieve incremental build with property change. When any property changes, WriteOnlyWhenDifferent will be triggered to write cache file.
And the cache file's timestamp will be later, and it then triggers the incremental build.-->
<Target Name="_GenerateRuntimeConfigurationFilesInputCache" DependsOnTargets="_DefaultMicrosoftNETPlatformLibrary">
<ItemGroup>
<GenerateRuntimeConfigurationFilesInputs Include="$(_GenerateRuntimeConfigurationPropertyInputsCache)" />
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="@(AdditionalProbingPath->'%(Identity)')"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(EnableDynamicLoading)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(RollForward)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="@(RuntimeHostConfigurationOption->'%(Identity)%(Value)')"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(RuntimeIdentifier)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(SelfContained)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(TargetFramework)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(UserRuntimeConfig)"/>
<_GenerateRuntimeConfigurationPropertyInputsCacheToHash Include="$(_WriteIncludedFrameworks)"/>
</ItemGroup>
<Hash ItemsToHash="@(_GenerateRuntimeConfigurationPropertyInputsCacheToHash)">
<Output TaskParameter="HashResult" PropertyName="_GenerateRuntimeConfigurationPropertyInputsCacheHash" />
</Hash>
<WriteLinesToFile
Lines="$(_GenerateRuntimeConfigurationPropertyInputsCacheHash)"
File="$(_GenerateRuntimeConfigurationPropertyInputsCache)"
Overwrite="True"
WriteOnlyWhenDifferent="True" />
<ItemGroup>
<FileWrites Include="$(_GenerateRuntimeConfigurationPropertyInputsCache)" />
</ItemGroup>
</Target>
<!--
============================================================
GenerateBuildRuntimeConfigurationFiles
Generates the $(project).runtimeconfig.json and $(project).runtimeconfig.dev.json files during Build
============================================================
-->
<Target Name="GenerateBuildRuntimeConfigurationFiles"
DependsOnTargets="_GenerateRuntimeConfigurationFilesInputCache"
BeforeTargets="CopyFilesToOutputDirectory"
Condition=" '$(GenerateRuntimeConfigurationFiles)' == 'true'"
Inputs="@(GenerateRuntimeConfigurationFilesInputs)"
Outputs="$(ProjectRuntimeConfigFilePath);$(ProjectRuntimeConfigDevFilePath)">
<PropertyGroup>
<_IsRollForwardSupported Condition="'$(_TargetFrameworkVersionWithoutV)' >= '3.0'">true</_IsRollForwardSupported>
<RollForward Condition="'$(RollForward)' == '' and '$(EnableDynamicLoading)' == 'true' and '$(_IsRollForwardSupported)' == 'true'">LatestMinor</RollForward>
</PropertyGroup>
<!-- RollForward is only supported since .NET Core 3.0, but we should allow limited usage when the app is targeting even lower versions
This is to let 2.* apps specify that they are OK to run on 3.0 and above. So explicitly allow just Major and LatestMajor
other values should still keep failing as they won't have any effect when run on 2.*. -->
<NETSdkError Condition="'$(RollForward)' != '' and '$(RollForward)' != 'Major' and '$(RollForward)' != 'LatestMajor' and '$(_IsRollForwardSupported)' != 'true'"
ResourceName="RollForwardRequiresVersion30"/>
<PropertyGroup>
<_WriteIncludedFrameworks Condition="'$(SelfContained)' == 'true' and '$(_TargetFrameworkVersionWithoutV)' >= '3.1'">true</_WriteIncludedFrameworks>
</PropertyGroup>
<GenerateRuntimeConfigurationFiles AssetsFilePath="$(ProjectAssetsFile)"
TargetFramework="$(TargetFramework)"
TargetFrameworkMoniker="$(TargetFrameworkMoniker)"
RuntimeConfigPath="$(ProjectRuntimeConfigFilePath)"
RuntimeConfigDevPath="$(ProjectRuntimeConfigDevFilePath)"
RuntimeIdentifier="$(RuntimeIdentifier)"
PlatformLibraryName="$(MicrosoftNETPlatformLibrary)"
RuntimeFrameworks="@(RuntimeFramework)"
RollForward="$(RollForward)"
UserRuntimeConfig="$(UserRuntimeConfig)"
HostConfigurationOptions="@(RuntimeHostConfigurationOption)"
AdditionalProbingPaths="@(AdditionalProbingPath)"
IsSelfContained="$(SelfContained)"
WriteIncludedFrameworks="$(_WriteIncludedFrameworks)"
GenerateRuntimeConfigDevFile="$(GenerateRuntimeConfigDevFile)"
AlwaysIncludeCoreFramework="$(AlwaysIncludeCoreFrameworkInRuntimeConfig)">
</GenerateRuntimeConfigurationFiles>
<ItemGroup>
<!-- Do this in an ItemGroup instead of as an output parameter of the GenerateDepsFile task so that it still gets added to the item set
during incremental builds when the task is skipped -->
<FileWrites Include="$(ProjectRuntimeConfigFilePath)" Condition="Exists('$(ProjectRuntimeConfigFilePath)')"/>
<FileWrites Include="$(ProjectRuntimeConfigDevFilePath)" Condition="Exists('$(ProjectRuntimeConfigDevFilePath)')"/>
</ItemGroup>
</Target>
<!-- Add runtimeconfig.json file to BuiltProjectOutputGroupOutput, so that it will get included in the NuGet package by the Pack target -->
<Target Name="AddRuntimeConfigFileToBuiltProjectOutputGroupOutput"
Condition=" '$(GenerateRuntimeConfigurationFiles)' == 'true'"
BeforeTargets="BuiltProjectOutputGroup">
<ItemGroup>
<BuiltProjectOutputGroupOutput Include="$(ProjectRuntimeConfigFilePath)"
TargetPath="$(ProjectRuntimeConfigFileName)"
FinalOutputPath="$(ProjectRuntimeConfigFilePath)" />
</ItemGroup>
</Target>
<Target Name="AddDepsJsonAndRuntimeConfigToCopyItemsForReferencingProjects"
BeforeTargets="GetCopyToOutputDirectoryItems;_GetCopyToOutputDirectoryItemsFromThisProject"
Condition="'$(HasRuntimeOutput)' == 'true'">
<ItemGroup Condition="'$(GenerateDependencyFile)' == 'true'">
<AllItemsFullPathWithTargetPath Include="$(ProjectDepsFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(ProjectDepsFilePath)))"
CopyToOutputDirectory="PreserveNewest" />
</ItemGroup>
<ItemGroup Condition=" '$(GenerateRuntimeConfigurationFiles)' == 'true'">
<AllItemsFullPathWithTargetPath Include="$(ProjectRuntimeConfigFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(ProjectRuntimeConfigFilePath)))"
CopyToOutputDirectory="PreserveNewest" />
<AllItemsFullPathWithTargetPath Include="$(ProjectRuntimeConfigDevFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(ProjectRuntimeConfigDevFilePath)))"
CopyToOutputDirectory="PreserveNewest" />
</ItemGroup>
</Target>
<Target Name="AddDepsJsonAndRuntimeConfigToPublishItemsForReferencingProjects"
DependsOnTargets="_ComputeUseBuildDependencyFile"
BeforeTargets="GetCopyToPublishDirectoryItems"
Condition="'$(HasRuntimeOutput)' == 'true'">
<ItemGroup Condition="'$(GenerateDependencyFile)' == 'true'">
<AllPublishItemsFullPathWithTargetPath Include="$(ProjectDepsFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(ProjectDepsFilePath)))"
CopyToPublishDirectory="PreserveNewest"
Condition="'$(_UseBuildDependencyFile)' == 'true'"/>
<AllPublishItemsFullPathWithTargetPath Include="$(PublishDepsFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(PublishDepsFilePath)))"
CopyToPublishDirectory="PreserveNewest"
Condition="'$(PublishDepsFilePath)' != '' and '$(_UseBuildDependencyFile)' != 'true'"/>
</ItemGroup>
<ItemGroup Condition=" '$(GenerateRuntimeConfigurationFiles)' == 'true'">
<AllPublishItemsFullPathWithTargetPath Include="$(ProjectRuntimeConfigFilePath)"
TargetPath="$([System.IO.Path]::GetFileName($(ProjectRuntimeConfigFilePath)))"
CopyToPublishDirectory="PreserveNewest" />
</ItemGroup>
</Target>
<Target Name="_SdkBeforeClean">
<PropertyGroup Condition="'$(_CleaningWithoutRebuilding)' == ''">
<_CleaningWithoutRebuilding>true</_CleaningWithoutRebuilding>
<EmitAssetsLogMessages>false</EmitAssetsLogMessages>
</PropertyGroup>
</Target>
<Target Name="_SdkBeforeRebuild">
<PropertyGroup>
<_CleaningWithoutRebuilding>false</_CleaningWithoutRebuilding>
</PropertyGroup>
</Target>
<!--
============================================================
DefaultRuntimeHostConfigurationOptions
Defaults @(RuntimeHostConfigurationOption) items based on MSBuild properties.
============================================================
-->
<ItemGroup>
<RuntimeHostConfigurationOption Include="Microsoft.Extensions.DependencyInjection.VerifyOpenGenericServiceTrimmability"
Condition="'$(VerifyDependencyInjectionOpenGenericServiceTrimmability)' != ''"
Value="$(VerifyDependencyInjectionOpenGenericServiceTrimmability)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.AggressiveAttributeTrimming"
Condition="'$(_AggressiveAttributeTrimming)' != ''"
Value="$(_AggressiveAttributeTrimming)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.ComponentModel.TypeConverter.EnableUnsafeBinaryFormatterInDesigntimeLicenseContextSerialization"
Condition="'$(EnableUnsafeBinaryFormatterInDesigntimeLicenseContextSerialization)' != ''"
Value="$(EnableUnsafeBinaryFormatterInDesigntimeLicenseContextSerialization)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Diagnostics.Debugger.IsSupported"
Condition="'$(DebuggerSupport)' != ''"
Value="$(DebuggerSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Diagnostics.Metrics.Meter.IsSupported"
Condition="'$(MetricsSupport)' != ''"
Value="$(MetricsSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Diagnostics.Tracing.EventSource.IsSupported"
Condition="'$(EventSourceSupport)' != ''"
Value="$(EventSourceSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.GC.Concurrent"
Condition="'$(ConcurrentGarbageCollection)' != ''"
Value="$(ConcurrentGarbageCollection)" />
<RuntimeHostConfigurationOption Include="System.GC.Server"
Condition="'$(ServerGarbageCollection)' != ''"
Value="$(ServerGarbageCollection)" />
<RuntimeHostConfigurationOption Include="System.GC.DynamicAdaptationMode"
Condition="'$(GarbageCollectionAdaptationMode)' != ''"
Value="$(GarbageCollectionAdaptationMode)" />
<RuntimeHostConfigurationOption Include="System.GC.RetainVM"
Condition="'$(RetainVMGarbageCollection)' != ''"
Value="$(RetainVMGarbageCollection)" />
<RuntimeHostConfigurationOption Include="System.Globalization.Invariant"
Condition="'$(InvariantGlobalization)' != ''"
Value="$(InvariantGlobalization)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Globalization.Hybrid"
Condition="'$(HybridGlobalization)' != ''"
Value="$(HybridGlobalization)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Globalization.PredefinedCulturesOnly"
Condition="'$(PredefinedCulturesOnly)' != ''"
Value="$(PredefinedCulturesOnly)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Net.Http.EnableActivityPropagation"
Condition="'$(HttpActivityPropagationSupport)' != ''"
Value="$(HttpActivityPropagationSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Net.Http.UseNativeHttpHandler"
Condition="'$(UseNativeHttpHandler)' != ''"
Value="$(UseNativeHttpHandler)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Reflection.Metadata.MetadataUpdater.IsSupported"
Condition="'$(MetadataUpdaterSupport)' != ''"
Value="$(MetadataUpdaterSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Reflection.NullabilityInfoContext.IsSupported"
Condition="'$(NullabilityInfoContextSupport)' != ''"
Value="$(NullabilityInfoContextSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Resources.ResourceManager.AllowCustomResourceTypes"
Condition="'$(CustomResourceTypesSupport)' != ''"
Value="$(CustomResourceTypesSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Resources.UseSystemResourceKeys"
Condition="'$(UseSystemResourceKeys)' != ''"
Value="$(UseSystemResourceKeys)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.CompilerServices.RuntimeFeature.IsDynamicCodeSupported"
Condition="'$(DynamicCodeSupport)' != ''"
Value="$(DynamicCodeSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.InteropServices.BuiltInComInterop.IsSupported"
Condition="'$(BuiltInComInteropSupport)' != ''"
Value="$(BuiltInComInteropSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.InteropServices.EnableConsumingManagedCodeFromNativeHosting"
Condition="'$(_EnableConsumingManagedCodeFromNativeHosting)' != ''"
Value="$(_EnableConsumingManagedCodeFromNativeHosting)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.InteropServices.EnableCppCLIHostActivation"
Condition="'$(EnableCppCLIHostActivation)' != ''"
Value="$(EnableCppCLIHostActivation)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.InteropServices.Marshalling.EnableGeneratedComInterfaceComImportInterop"
Condition="'$(EnableGeneratedComInterfaceComImportInterop)' != ''"
Value="$(EnableGeneratedComInterfaceComImportInterop)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.Serialization.EnableUnsafeBinaryFormatterSerialization"
Condition="'$(EnableUnsafeBinaryFormatterSerialization)' != ''"
Value="$(EnableUnsafeBinaryFormatterSerialization)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Runtime.TieredCompilation"
Condition="'$(TieredCompilation)' != ''"
Value="$(TieredCompilation)" />
<RuntimeHostConfigurationOption Include="System.Runtime.TieredCompilation.QuickJit"
Condition="'$(TieredCompilationQuickJit)' != ''"
Value="$(TieredCompilationQuickJit)" />
<RuntimeHostConfigurationOption Include="System.Runtime.TieredCompilation.QuickJitForLoops"
Condition="'$(TieredCompilationQuickJitForLoops)' != ''"
Value="$(TieredCompilationQuickJitForLoops)" />
<RuntimeHostConfigurationOption Include="System.Runtime.TieredPGO"
Condition="'$(TieredPGO)' != ''"
Value="$(TieredPGO)" />
<RuntimeHostConfigurationOption Include="System.Runtime.Loader.UseRidGraph"
Condition="'$(_UseRidGraphWasSpecified)' == 'true'"
Value="$(UseRidGraph)" />
<RuntimeHostConfigurationOption Include="System.StartupHookProvider.IsSupported"
Condition="'$(StartupHookSupport)' != ''"
Value="$(StartupHookSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Text.Encoding.EnableUnsafeUTF7Encoding"
Condition="'$(EnableUnsafeUTF7Encoding)' != ''"
Value="$(EnableUnsafeUTF7Encoding)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Text.Json.JsonSerializer.IsReflectionEnabledByDefault"
Condition="'$(JsonSerializerIsReflectionEnabledByDefault)' != ''"
Value="$(JsonSerializerIsReflectionEnabledByDefault)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Threading.Thread.EnableAutoreleasePool"
Condition="'$(AutoreleasePoolSupport)' != ''"
Value="$(AutoreleasePoolSupport)"
Trim="true" />
<RuntimeHostConfigurationOption Include="System.Threading.ThreadPool.MinThreads"
Condition="'$(ThreadPoolMinThreads)' != ''"
Value="$(ThreadPoolMinThreads)" />
<RuntimeHostConfigurationOption Include="System.Threading.ThreadPool.MaxThreads"
Condition="'$(ThreadPoolMaxThreads)' != ''"
Value="$(ThreadPoolMaxThreads)" />
<RuntimeHostConfigurationOption Include="System.Threading.ThreadPool.UseWindowsThreadPool"
Condition="'$(UseWindowsThreadPool)' != ''"
Value="$(UseWindowsThreadPool)" />
<RuntimeHostConfigurationOption Include="System.Xml.XmlResolver.IsNetworkingEnabledByDefault"
Condition="'$(XmlResolverIsNetworkingEnabledByDefault)' != ''"
Value="$(XmlResolverIsNetworkingEnabledByDefault)"
Trim="true" />
</ItemGroup>
<!--
============================================================
DefaultAdditionalProbingPaths
Adds the default @(AdditionalProbingPath) items.
============================================================
-->
<ItemGroup Condition="'$(GenerateRuntimeConfigurationFiles)' == 'true' and '$(SkipDefaultAdditionalProbingPaths)' != 'true'">
<!-- Note: can't use Path.Combine here since `|` is an illegal path character -->
<AdditionalProbingPath Include="$(UserProfileRuntimeStorePath)$([System.IO.Path]::DirectorySeparatorChar)|arch|$([System.IO.Path]::DirectorySeparatorChar)|tfm|" />
</ItemGroup>
<PropertyGroup>
<CompileDependsOn>
$(CompileDependsOn);
_CreateAppHost;
_CreateComHost;
_GetIjwHostPaths;
</CompileDependsOn>
</PropertyGroup>
<!--
============================================================
_CreateAppHost
If we found a restored apphost, create the modified destination apphost
with options from the project.
============================================================
-->
<UsingTask TaskName="CreateAppHost" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_CreateAppHost"
Inputs="@(IntermediateAssembly);$(AppHostSourcePath)"
Outputs="$(AppHostIntermediatePath)"
DependsOnTargets="_ChooseAppHost;CoreCompile"
Condition="'$(ComputeNETCoreBuildOutputFiles)' == 'true' and
'$(AppHostSourcePath)' != '' and
Exists('@(IntermediateAssembly)') and
Exists('$(AppHostSourcePath)')">
<PropertyGroup>
<_UseWindowsGraphicalUserInterface Condition="($(RuntimeIdentifier.StartsWith('win')) or $(DefaultAppHostRuntimeIdentifier.StartsWith('win'))) and '$(OutputType)'=='WinExe'">true</_UseWindowsGraphicalUserInterface>
<_EnableMacOSCodeSign Condition="'$(_EnableMacOSCodeSign)' == '' and $([MSBuild]::IsOSPlatform(`OSX`)) and Exists('/usr/bin/codesign') and
($(RuntimeIdentifier.StartsWith('osx')) or $(AppHostRuntimeIdentifier.StartsWith('osx')))">true</_EnableMacOSCodeSign>
</PropertyGroup>
<CreateAppHost AppHostSourcePath="$(AppHostSourcePath)"
AppHostDestinationPath="$(AppHostIntermediatePath)"
AppBinaryName="$(AssemblyName)$(TargetExt)"
IntermediateAssembly="@(IntermediateAssembly->'%(FullPath)')"
WindowsGraphicalUserInterface="$(_UseWindowsGraphicalUserInterface)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
EnableMacOSCodeSign="$(_EnableMacOSCodeSign)"
/>
</Target>
<!--
============================================================
_ChooseAppHost
Choose the correct app-host for the build scenario:
* SingleFileHost if an app being published as a self-contained single-file .net5+ app
* AppHost otherwise
============================================================
-->
<Target Name="_ChooseAppHost"
DependsOnTargets="_GetAppHostPaths"
Condition="'$(UseAppHost)' == 'true' and '$(_IsExecutable)' == 'true'">
<PropertyGroup Condition="'$(PublishSingleFile)' == 'true' and
'$(SelfContained)' == 'true' and
'$(_TargetFrameworkVersionWithoutV)' >= '5.0' and
'$(SingleFileHostSourcePath)' != ''">
<AppHostSourcePath>$(SingleFileHostSourcePath)</AppHostSourcePath>
<AppHostIntermediatePath>$([System.IO.Path]::GetFullPath('$(IntermediateOutputPath)singlefilehost$(_NativeExecutableExtension)'))</AppHostIntermediatePath>
</PropertyGroup>
</Target>
<!--
============================================================
_GetAppHostPaths
Gets the path to apphost (restored via packages or in an apphost pack),
and computes the path for the destination apphost.
============================================================
-->
<Target Name="_GetAppHostPaths"
DependsOnTargets="ResolvePackageAssets;ResolveFrameworkReferences"
Condition="'$(UseAppHost)' == 'true' and '$(_IsExecutable)' == 'true'">
<NETSdkError Condition="'@(_NativeRestoredAppHostNETCore->Count())' > 1"
ResourceName="MultipleFilesResolved"
FormatArguments="$(_DotNetAppHostExecutableName)" />
<PropertyGroup>
<!-- AppHostSourcePath will be set from ProcessFrameworkReferences if not using the apphost from the assets file -->
<AppHostSourcePath Condition="'$(UseAppHostFromAssetsFile)' == 'true'">@(_NativeRestoredAppHostNETCore)</AppHostSourcePath>
</PropertyGroup>
<PropertyGroup Condition="'$(UseAppHostFromAssetsFile)' == 'false' Or '@(_NativeRestoredAppHostNETCore)' != ''">
<AppHostIntermediatePath>$([System.IO.Path]::GetFullPath('$(IntermediateOutputPath)apphost$(_NativeExecutableExtension)'))</AppHostIntermediatePath>
</PropertyGroup>
</Target>
<ItemGroup>
<ClsidMap Include="$(IntermediateOutputPath)$(AssemblyName).clsidmap" />
<RegFreeComManifest Include="$(IntermediateOutputPath)$(AssemblyName).X.manifest" />
</ItemGroup>
<!--
============================================================
_GenerateClsidMap
Generates a *.clsidmap file from the built assembly.
============================================================
-->
<UsingTask TaskName="GenerateClsidMap" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_GenerateClsidMap"
Inputs="@(IntermediateAssembly)"
Outputs="@(ClsidMap)"
DependsOnTargets="CoreCompile"
Condition="'$(ComputeNETCoreBuildOutputFiles)' == 'true' and
'$(EnableComHosting)' == 'true'">
<GenerateClsidMap
IntermediateAssembly="@(IntermediateAssembly->'%(FullPath)')"
CLsidMapDestinationPath="@(ClsidMap->'%(FullPath)')" />
</Target>
<UsingTask TaskName="CreateComHost" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<!--
============================================================
_CreateComHost
If we found a restored comhost, create the modified destination apphost
with options from the project.
============================================================
-->
<Target Name="_CreateComHost"
Inputs="@(IntermediateAssembly);$(ComHostSourcePath)"
Outputs="$(ComHostIntermediatePath)"
DependsOnTargets="_GetComHostPaths;CoreCompile;_GenerateClsidMap;_GenerateRegFreeComManifest"
Condition="'$(ComputeNETCoreBuildOutputFiles)' == 'true' and
'$(ComHostIntermediatePath)' != '' and
Exists('@(IntermediateAssembly)') and
Exists('$(ComHostSourcePath)')">
<CreateComHost
ComHostSourcePath="$(ComHostSourcePath)"
ComHostDestinationPath="$(ComHostIntermediatePath)"
ClsidMapPath="@(ClsidMap)"
TypeLibraries="@(ComHostTypeLibrary)" />
</Target>
<UsingTask TaskName="GenerateRegFreeComManifest" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<!--
============================================================
_GenerateRegFreeComManifest
Gets the path to the restored comhost, and if the restored comhost
was present, computes the path for the destination comhost.
============================================================
-->
<Target Name="_GenerateRegFreeComManifest"
DependsOnTargets="_GenerateClsidMap;_GetComHostPaths"
Inputs="@(ClsidMap);@(IntermediateAssembly)"
Outputs="@(RegFreeComManifest)"
Condition="'$(ComputeNETCoreBuildOutputFiles)' == 'true' and
'$(EnableComHosting)' == 'true' and
'$(EnableRegFreeCom)' == 'true'">
<GenerateRegFreeComManifest
IntermediateAssembly="@(IntermediateAssembly)"
ComHostName="$(ComHostFileName)"
ClsidMapPath="@(ClsidMap)"
TypeLibraries="@(ComHostTypeLibrary)"
ComManifestPath="@(RegFreeComManifest)" />
</Target>
<!--
============================================================
_GetComHostPaths
Gets the path to the restored comhost, and if the restored comhost
was present, computes the path for the destination comhost.
============================================================
-->
<Target Name="_GetComHostPaths"
DependsOnTargets="ResolvePackageAssets;ResolveFrameworkReferences"
Condition="'$(EnableComHosting)' == 'true' and '$(_IsExecutable)' != 'true'">
<PropertyGroup>
<ComHostFileName>$(AssemblyName).comhost$(_ComHostLibraryExtension)</ComHostFileName>
<ComHostIntermediatePath>$([System.IO.Path]::GetFullPath('$(IntermediateOutputPath)$(ComHostFileName)'))</ComHostIntermediatePath>
</PropertyGroup>
<NETSdkError Condition="'$(ComHostSourcePath)' == '' or !Exists('$(ComHostSourcePath)')"
ResourceName="CannotFindComhost" />
</Target>
<!--
============================================================
_GetIjwHostPaths
Gets the path to the restored Ijwhost, and if the restored Ijwhost
was present, Computes the path for the destination Ijwhost.
============================================================
-->
<Target Name="_GetIjwHostPaths"
DependsOnTargets="ResolvePackageAssets;ResolveFrameworkReferences"
Condition="'$(UseIJWHost)' == 'true'">
<NETSdkError Condition="'$(IjwHostSourcePath)' == '' or !Exists('$(IjwHostSourcePath)')"
ResourceName="CannotFindIjwhost" />
</Target>
<!--
============================================================
_ComputeNETCoreBuildOutputFiles
Computes any files that need to be copied to the build output folder for .NET Core.
============================================================
-->
<Target Name="_ComputeNETCoreBuildOutputFiles"
DependsOnTargets="_ChooseAppHost;_GetComHostPaths;_GetIjwHostPaths"
BeforeTargets="AssignTargetPaths"
Condition="'$(ComputeNETCoreBuildOutputFiles)' == 'true'">
<!-- Fallback to renaming the dotnet host if there is no apphost for self-contained builds. -->
<PropertyGroup Condition="'$(AppHostIntermediatePath)' == '' and '$(SelfContained)' == 'true'">
<_CopyAndRenameDotnetHost Condition="'$(_CopyAndRenameDotnetHost)' == ''">true</_CopyAndRenameDotnetHost>
</PropertyGroup>
<ItemGroup Condition="'$(_CopyAndRenameDotnetHost)' == 'true'">
<None Include="@(NativeCopyLocalItems)"
Condition="'%(NativeCopyLocalItems.FileName)%(NativeCopyLocalItems.Extension)' == '$(_DotNetHostExecutableName)'">
<Link>$(AssemblyName)$(_NativeExecutableExtension)</Link>
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
</ItemGroup>
<ItemGroup Condition="'$(AppHostIntermediatePath)' != '' or '$(_CopyAndRenameDotnetHost)' == 'true'">
<!--
If not copying local lock file assemblies, copy the host policy and host fxr libraries for self-contained builds.
This is required to allow the host to activate in self-contained mode.
-->
<None Include="@(NativeCopyLocalItems)"
Condition="'$(SelfContained)' == 'true' and
'$(CopyLocalLockFileAssemblies)' != 'true' and
('%(NativeCopyLocalItems.FileName)%(NativeCopyLocalItems.Extension)' == '$(_DotNetHostPolicyLibraryName)' or
'%(NativeCopyLocalItems.FileName)%(NativeCopyLocalItems.Extension)' == '$(_DotNetHostFxrLibraryName)')">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>Never</CopyToPublishDirectory>
</None>
</ItemGroup>
<ItemGroup Condition="'$(AppHostIntermediatePath)' != ''">
<None Include="$(AppHostIntermediatePath)">
<Link>$(AssemblyName)$(_NativeExecutableExtension)</Link>
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<!-- Always copy the AppHost because the contents of the apphost binary can change during the publish step (due to single-file bundling).
Always copying the apphost ensures that that the sequence
dotnet publish /p:PublishSingleFile=true
dotnet publish /p:PublishSingleFile=false
places the correct unbundled apphost in the publish directory. -->
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</None>
</ItemGroup>
<ItemGroup Condition="'$(ComHostIntermediatePath)' != ''">
<None Include="$(ComHostIntermediatePath)">
<Link>$(AssemblyName).$(_DotNetComHostLibraryName)</Link>
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
<None Include="@(RegFreeComManifest)" Condition="'$(EnableRegFreeCom)' == 'true'">
<Link>%(FileName)%(Extension)</Link>
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
</ItemGroup>
<ItemGroup Condition="'$(IjwHostSourcePath)' != '' and '$(UseIJWHost)' == 'true'">
<None Include="$(IjwHostSourcePath)">
<Link>$(_DotNetIjwHostLibraryName)</Link>
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
</ItemGroup>
</Target>
<!--
============================================================
_ComputeReferenceAssemblies
Computes references that are only used at compile-time.
============================================================
-->
<Target Name="_ComputeReferenceAssemblies"
DependsOnTargets="ResolveAssemblyReferences">
<ItemGroup>
<_FrameworkReferenceAssemblies Include="@(ReferencePath)"
Condition="(%(ReferencePath.FrameworkFile) == 'true' or
%(ReferencePath.ResolvedFrom) == 'ImplicitlyExpandDesignTimeFacades')
and ('%(ReferencePath.NuGetSourceType)' == '' or
'%(ReferencePath.NuGetIsFrameworkReference)' == 'true')" />
<!--
"ReferenceOnly" assemblies are assemblies that are only used at compile-time, and they can't be resolved
by the normal compile-assembly resolvers at runtime:
1. App local
2. NuGet/Package layout
3. ProgramFiles\Reference Assemblies
These assemblies need to be copied to the 'refs' folder for both build and publish.
-->
<_ReferenceOnlyAssemblies Include="@(ReferencePath)"
Exclude="@(_FrameworkReferenceAssemblies)"
Condition="%(ReferencePath.CopyLocal) != 'true' and
%(ReferencePath.NuGetSourceType) == ''" />
<_ReferenceAssemblies Include="@(_FrameworkReferenceAssemblies)" />
<_ReferenceAssemblies Include="@(_ReferenceOnlyAssemblies)" />
</ItemGroup>
</Target>
<!--
============================================================
_ComputeUserRuntimeAssemblies
Computes references or reference dependencies that are copy local.
NOTE: NuGet and framework references are never copy local so those are not included here.
These will be project references and direct references and their copy local dependencies.
============================================================
-->
<Target Name="_ComputeUserRuntimeAssemblies">
<ItemGroup>
<!-- IncludeRuntimeDependency=true metadata is escape hatch to include a non-copy local reference in deps file as a runtime dependency -->
<ReferencePath>
<IncludeRuntimeDependency Condition="'%(ReferencePath.IncludeRuntimeDependency)' == '' and '%(ReferencePath.CopyLocal)' == 'true'">true</IncludeRuntimeDependency>
</ReferencePath>
<ReferenceDependencyPaths>
<IncludeRuntimeDependency Condition="'%(ReferenceDependencyPaths.IncludeRuntimeDependency)' == '' and '%(ReferenceDependencyPaths.CopyLocal)' == 'true'">true</IncludeRuntimeDependency>
</ReferenceDependencyPaths>
<UserRuntimeAssembly Include="@(ReferencePath->WithMetadataValue('IncludeRuntimeDependency', 'true'))" />
<UserRuntimeAssembly Include="@(ReferenceDependencyPaths->WithMetadataValue('IncludeRuntimeDependency', 'true'))" />
</ItemGroup>
</Target>
<!--
============================================================
Run Information
The ProcessStart information that can be used to run this project.
============================================================
-->
<PropertyGroup>
<RunWorkingDirectory Condition="'$(RunWorkingDirectory)' == ''">$(StartWorkingDirectory)</RunWorkingDirectory>
</PropertyGroup>
<Choose>
<When Condition="'$(StartAction)' == 'Program'">
<PropertyGroup>
<RunCommand Condition="'$(RunCommand)' == ''">$(StartProgram)</RunCommand>
<RunArguments Condition="'$(RunArguments)' == ''">$(StartArguments)</RunArguments>
</PropertyGroup>
</When>
<When Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and '$(_IsExecutable)' == 'true'">
<PropertyGroup Condition="'$(UseAppHost)' != 'true'">
<!-- TODO: https://github.com/dotnet/sdk/issues/20 Need to get the DotNetHost path from MSBuild -->
<RunCommand Condition="'$(RunCommand)' == ''">dotnet</RunCommand>
<_NetCoreRunArguments>exec "$(TargetPath)"</_NetCoreRunArguments>
<RunArguments Condition="'$(RunArguments)' == '' and '$(StartArguments)' != ''">$(_NetCoreRunArguments) $(StartArguments)</RunArguments>
<RunArguments Condition="'$(RunArguments)' == ''">$(_NetCoreRunArguments)</RunArguments>
</PropertyGroup>
<PropertyGroup Condition="'$(UseAppHost)' == 'true'">
<RunCommand Condition="'$(RunCommand)' == ''">$(TargetDir)$(AssemblyName)$(_NativeExecutableExtension)</RunCommand>
<RunArguments Condition="'$(RunArguments)' == ''">$(StartArguments)</RunArguments>
</PropertyGroup>
</When>
<When Condition="'$(TargetFrameworkIdentifier)' == '.NETFramework' and '$(_IsExecutable)' == 'true'">
<PropertyGroup Condition="$([MSBuild]::IsOSPlatform(`Windows`))">
<RunCommand Condition="'$(RunCommand)' == ''">$(TargetPath)</RunCommand>
<RunArguments Condition="'$(RunArguments)' == ''">$(StartArguments)</RunArguments>
</PropertyGroup>
<PropertyGroup Condition="$([MSBuild]::IsOSUnixLike())">
<RunCommand Condition="'$(RunCommand)' == ''">mono</RunCommand>
<RunArguments Condition="'$(RunArguments)' == ''">"$(TargetPath)" $(StartArguments)</RunArguments>
</PropertyGroup>
</When>
</Choose>
<PropertyGroup>
<!-- Ensure $(RunWorkingDirectory) is a full path -->
<RunWorkingDirectory Condition="'$(RunWorkingDirectory)' != '' and '$([System.IO.Path]::IsPathRooted($(RunWorkingDirectory)))' != 'true'">$([System.IO.Path]::GetFullPath($([System.IO.Path]::Combine('$(MSBuildProjectDirectory)', '$(RunWorkingDirectory)'))))</RunWorkingDirectory>
</PropertyGroup>
<!-- Override MSBuild Run Target -->
<Target Name="Run">
<Exec Command="$(RunCommand) $(RunArguments)" WorkingDirectory="$(RunWorkingDirectory)"/>
</Target>
<!--
============================================================
CoreGenerateSatelliteAssemblies
============================================================
-->
<PropertyGroup>
<CreateSatelliteAssembliesDependsOn>
$(CreateSatelliteAssembliesDependsOn);
CoreGenerateSatelliteAssemblies
</CreateSatelliteAssembliesDependsOn>
</PropertyGroup>
<UsingTask TaskName="GetAssemblyAttributes" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="CoreGenerateSatelliteAssemblies"
DependsOnTargets="ResolveAssemblyReferences;_GetAssemblyInfoFromTemplateFile"
Inputs="$(MSBuildAllProjects);@(_SatelliteAssemblyResourceInputs);$(IntermediateOutputPath)$(TargetName)$(TargetExt)"
Outputs="$(IntermediateOutputPath)%(Culture)\$(TargetName).resources.dll"
Condition="'@(_SatelliteAssemblyResourceInputs)' != '' and '$(GenerateSatelliteAssembliesForCore)' == 'true' ">
<MakeDir Directories="@(_SatelliteAssemblyResourceInputs->'$(IntermediateOutputPath)%(Culture)')" />
<PropertyGroup>
<_AssemblyInfoFile>$(IntermediateOutputPath)%(_SatelliteAssemblyResourceInputs.Culture)\$(TargetName).resources.cs</_AssemblyInfoFile>
<_OutputAssembly>$(IntermediateOutputPath)%(_SatelliteAssemblyResourceInputs.Culture)\$(TargetName).resources.dll</_OutputAssembly>
</PropertyGroup>
<ItemGroup>
<SatelliteAssemblyAttribute Include="System.Reflection.AssemblyCultureAttribute" Condition="'%(_SatelliteAssemblyResourceInputs.Culture)' != ''">
<_Parameter1>%(_SatelliteAssemblyResourceInputs.Culture)</_Parameter1>
</SatelliteAssemblyAttribute>
</ItemGroup>
<WriteCodeFragment AssemblyAttributes="@(SatelliteAssemblyAttribute)" Language="C#" OutputFile="$(_AssemblyInfoFile)">
<Output TaskParameter="OutputFile" ItemName="FileWrites" />
</WriteCodeFragment>
<PropertyGroup Condition="'$(UseSharedCompilation)' == ''">
<UseSharedCompilation>true</UseSharedCompilation>
</PropertyGroup>
<Csc Resources="@(_SatelliteAssemblyResourceInputs)"
Sources="$(_AssemblyInfoFile)"
OutputAssembly="$(_OutputAssembly)"
References="@(ReferencePath)"
KeyContainer="$(KeyContainerName)"
KeyFile="$(KeyOriginatorFile)"
NoConfig="true"
NoLogo="$(NoLogo)"
NoStandardLib="$(NoCompilerStandardLib)"
Optimize="$(Optimize)"
PublicSign="$(PublicSign)"
DelaySign="$(DelaySign)"
Deterministic="$(Deterministic)"
DisabledWarnings="$(DisabledWarnings)"
WarningLevel="$(WarningLevel)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
TargetType="Library"
ToolExe="$(CscToolExe)"
ToolPath="$(CscToolPath)"
UseSharedCompilation="$(UseSharedCompilation)">
<Output TaskParameter="OutputAssembly" ItemName="FileWrites"/>
</Csc>
</Target>
<Target Name="_GetAssemblyInfoFromTemplateFile">
<GetAssemblyAttributes PathToTemplateFile="$(IntermediateOutputPath)$(TargetName)$(TargetExt)" >
<Output TaskParameter="AssemblyAttributes" ItemName="_AssemblyAttributesFromTemplateFile" />
</GetAssemblyAttributes>
<ItemGroup>
<SatelliteAssemblyAttribute Include="@(_AssemblyAttributesFromTemplateFile)" />
</ItemGroup>
</Target>
<!--
============================================================
GetAllRuntimeIdentifiers
============================================================
-->
<Target Name="GetAllRuntimeIdentifiers"
Returns="$(RuntimeIdentifiers);$(RuntimeIdentifier)" />
<!--
============================================================
_BlockWinMDsOnUnsupportedTFMs
Block referencing or producing
Windows Metadata files (.winmd) for target frameworks
that do not support loading winmds directly
into the runtime as assemblies
============================================================
-->
<UsingTask TaskName="CheckForUnsupportedWinMDReferences" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_BlockWinMDsOnUnsupportedTFMs"
AfterTargets="PreBuildEvent"
DependsOnTargets="ResolveReferences"
Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and $([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '5.0'))">
<CheckForUnsupportedWinMDReferences
TargetFrameworkMoniker="$(TargetFrameworkMoniker)"
ReferencePaths="@(ReferencePath)"
/>
<NETSdkError Condition="'$(OutputType)' == 'winmdobj'"
ResourceName="WinMDObjNotSupportedOnTargetFramework"
FormatArguments="$(TargetFrameworkMoniker)" />
</Target>
<!--
============================================================
InjectTargetPathMetadata
Update TargetPathWithTargetPlatformMoniker with target framework
identifier and version metadata. This is so that the
ImplicitlyExpandNETStandardFacades target can determine if a
referenced project needs the .NET Standard facades even if
the project hasn't been compiled to disk yet.
See https://github.com/dotnet/sdk/issues/1403 for more context
============================================================
-->
<ItemDefinitionGroup>
<TargetPathWithTargetPlatformMoniker>
<TargetFrameworkIdentifier>$(TargetFrameworkIdentifier)</TargetFrameworkIdentifier>
<TargetFrameworkVersion>$(_TargetFrameworkVersionWithoutV)</TargetFrameworkVersion>
</TargetPathWithTargetPlatformMoniker>
</ItemDefinitionGroup>
<!--
============================================================
GenerateSupportedTargetFrameworkAlias
Generate a list of valid TargetFramework aliases for the project
system to consume for the target framework properties page drop down
============================================================
-->
<UsingTask TaskName="GenerateSupportedTargetFrameworkAlias" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="GenerateSupportedTargetFrameworkAlias"
Returns="@(SupportedTargetFrameworkAlias)">
<GenerateSupportedTargetFrameworkAlias SupportedTargetFramework="@(SupportedTargetFramework)"
TargetFrameworkMoniker="$(TargetFrameworkMoniker)"
TargetPlatformMoniker="$(TargetPlatformMoniker)"
UseWpf="$(UseWpf)"
UseWindowsForms="$(UseWindowsForms)">
<Output TaskParameter="SupportedTargetFrameworkAlias" ItemName="SupportedTargetFrameworkAlias" />
</GenerateSupportedTargetFrameworkAlias>
</Target>
<!--
============================================================
ValidateExecutableReferences
============================================================
-->
<ItemGroup>
<AdditionalTargetFrameworkInfoProperty Include="SelfContained"/>
<AdditionalTargetFrameworkInfoProperty Include="_IsExecutable"/>
<AdditionalTargetFrameworkInfoProperty Include="IsRidAgnostic"/>
<AdditionalTargetFrameworkInfoProperty Include="ShouldBeValidatedAsExecutableReference"/>
<AdditionalTargetFrameworkInfoProperty Include="_SelfContainedWasSpecified"/>
</ItemGroup>
<PropertyGroup Condition="'$(RuntimeIdentifier)' == 'browser-wasm'">
<!-- Don't generate a NETSDK1151 error if a non self-contained Exe references a Blazor wasm Exe -->
<ShouldBeValidatedAsExecutableReference>false</ShouldBeValidatedAsExecutableReference>
</PropertyGroup>
<PropertyGroup Condition="'$(IsTestProject)' == 'true' And '$(ValidateExecutableReferencesMatchSelfContained)' == ''">
<!-- Don't generate an error if a test project references a self-contained Exe. Test projects
use an OutputType of Exe but will usually call APIs in a referenced Exe rather than try
to run it. -->
<ValidateExecutableReferencesMatchSelfContained>false</ValidateExecutableReferencesMatchSelfContained>
</PropertyGroup>
<PropertyGroup Condition="'$(IsTestProject)' == 'true'">
<!-- Don't generate an error if an Exe project references a test project. -->
<ShouldBeValidatedAsExecutableReference>false</ShouldBeValidatedAsExecutableReference>
</PropertyGroup>
<UsingTask TaskName="ValidateExecutableReferences" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<PropertyGroup>
<_UseAttributeForTargetFrameworkInfoPropertyNames Condition="$([MSBuild]::VersionGreaterThanOrEquals($(MSBuildVersion), '17.0'))">true</_UseAttributeForTargetFrameworkInfoPropertyNames>
</PropertyGroup>
<Target Name="ValidateExecutableReferences"
AfterTargets="_GetProjectReferenceTargetFrameworkProperties"
Condition="'$(ValidateExecutableReferencesMatchSelfContained)' != 'false'">
<ValidateExecutableReferences
SelfContained="$(SelfContained)"
IsExecutable="$(_IsExecutable)"
ReferencedProjects="@(_MSBuildProjectReferenceExistent)"
UseAttributeForTargetFrameworkInfoPropertyNames="$(_UseAttributeForTargetFrameworkInfoPropertyNames)"/>
</Target>
<!--
============================================================
Command Line Configuration Validation
============================================================
-->
<Target Name="ValidateCommandLineProperties"
AfterTargets="_CheckForInvalidConfigurationAndPlatform" >
<!-- Currently a no-op, but we could put things here in the future, so keeping it. -->
</Target>
<!--
============================================================
Project Capabilities
============================================================
-->
<ItemGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and '$(_IsExecutable)' == 'true'">
<ProjectCapability Include="CrossPlatformExecutable" />
</ItemGroup>
<!-- Native AOT compilation -->
<!-- Native AOT properties should be shown by default for projects targeting .NET 8 or higher, except for WPF and WinForms projects -->
<ItemGroup Condition="'$(UseWPF)' != 'true'
and '$(UseWindowsForms)' != 'true'
and '$(TargetFrameworkIdentifier)' == '.NETCoreApp'
and $([MSBuild]::VersionGreaterThanOrEquals('$(_TargetFrameworkVersionWithoutV)', '8.0'))">
<ProjectCapability Include="NativeAOT"/>
</ItemGroup>
<!-- Reference Manager capabilities -->
<ItemGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp'">
<ProjectCapability Remove="ReferenceManagerAssemblies" />
</ItemGroup>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Sdk.SourceLink.targets" Condition="'$(SuppressImplicitGitSourceLink)' != 'true'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.DisableStandardFrameworkResolution.targets" Condition="'$(DisableStandardFrameworkResolution)' == 'true'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.DesignerSupport.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.GenerateAssemblyInfo.targets" Condition="'$(UsingNETSdkDefaults)' == 'true'"/>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.GenerateGlobalUsings.targets" Condition="'$(Language)' == 'C#'"/>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.GenerateSupportedRuntime.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.ComposeStore.targets" Condition="'$(UsingNETSdkDefaults)' == 'true'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.CrossGen.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.ObsoleteReferences.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Publish.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.PackStubs.targets" Condition="('$(Language)' == 'C++' and '$(_EnablePackageReferencesInVCProjects)' != 'true')"/>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.PackTool.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.PackProjectTool.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.PreserveCompilationContext.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.ConflictResolution.targets" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Sdk.CSharp.targets" Condition="'$(Language)' == 'C#'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Sdk.VisualBasic.targets" Condition="'$(Language)' == 'VB'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Sdk.FSharp.targets" Condition="'$(Language)' == 'F#'" />
<Import Project="$(ILCompilerTargetsPath)" Condition="'$(ILCompilerTargetsPath)' != '' and '$(PublishAot)' == 'true'"/>
<Import Project="$(ILLinkTargetsPath)" Condition="'$(ILLinkTargetsPath)' != '' and '$(Language)' != 'C++'" />
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Sdk.Analyzers.targets" Condition="'$(Language)' == 'C#' or '$(Language)' == 'VB'" />
<!-- Import WindowsDesktop targets if necessary -->
<PropertyGroup Condition=" '$(ImportWindowsDesktopTargets)' == ''
and ('$(UseWpf)' == 'true' Or '$(UseWindowsForms)' == 'true') ">
<ImportWindowsDesktopTargets Condition=" '$(TargetFrameworkIdentifier)' == '.NETCoreApp'
and $([MSBuild]::VersionGreaterThanOrEquals($(_TargetFrameworkVersionWithoutV), '3.0'))
and '$(TargetPlatformIdentifier)' == 'Windows' ">true</ImportWindowsDesktopTargets>
<ImportWindowsDesktopTargets Condition="'$(TargetFrameworkIdentifier)' == '.NETFramework'">true</ImportWindowsDesktopTargets>
</PropertyGroup>
<PropertyGroup Condition=" '$(ImportWindowsDesktopTargets)' == 'true'">
<AfterMicrosoftNETSdkTargets>$(AfterMicrosoftNETSdkTargets);$(MSBuildThisFileDirectory)../../Microsoft.NET.Sdk.WindowsDesktop/targets/Microsoft.NET.Sdk.WindowsDesktop.targets</AfterMicrosoftNETSdkTargets>
</PropertyGroup>
<!-- Note: Once WindowsDesktop is a workload this will be moved to WorkloadManifest.targets -->
<ItemGroup Condition="'$(MicrosoftNETWindowsWorkloadInstalled)' == 'true' and
'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and
$([MSBuild]::VersionGreaterThanOrEquals($(TargetFrameworkVersion), '5.0'))">
<SdkSupportedTargetPlatformIdentifier Include="windows" DisplayName="Windows" />
</ItemGroup>
<Import Project="$(MSBuildThisFileDirectory)Microsoft.NET.Windows.targets" Condition="'$(TargetPlatformIdentifier)' == 'Windows'" />
<!-- TargetPlatformMoniker and TargetPlatformDisplayName would normally be set in Microsoft.Common.CurrentVersion.targets. However, the
TargetPlatformVersion may have been set later than that in evaluation by platform-specific targets or Directory.Build.targets. So fix up those properties here -->
<PropertyGroup Condition="'$(TargetPlatformMoniker)' == '' and '$(TargetPlatformIdentifier)' != ''">
<!-- Set TargetPlatformVersion if it isn't set. This is so that we have a valid TargetPlatformMoniker for Restore.
This avoids an issue where projects with multitargeted unknown platforms would fail to restore because the platforms
weren't included in the TargetPlatformMoniker for restore, obscuring the errors about unknown platforms or missing
workloads. -->
<TargetPlatformVersion Condition="'$(TargetPlatformVersion)' == ''">0.0</TargetPlatformVersion>
<TargetPlatformMoniker>$(TargetPlatformIdentifier),Version=$(TargetPlatformVersion)</TargetPlatformMoniker>
<TargetPlatformDisplayName>$([Microsoft.Build.Utilities.ToolLocationHelper]::GetPlatformSDKDisplayName($(TargetPlatformIdentifier), $(TargetPlatformVersion)))</TargetPlatformDisplayName>
</PropertyGroup>
<!-- Default SupportedOSPlatformVersion to TargetPlatformVersion -->
<PropertyGroup Condition="'$(SupportedOSPlatformVersion)' == ''">
<SupportedOSPlatformVersion>$(TargetPlatformVersion)</SupportedOSPlatformVersion>
</PropertyGroup>
<Import Project="$(AfterMicrosoftNETSdkTargets)" Condition="'$(AfterMicrosoftNETSdkTargets)' != ''"/>
</Project>
|