|
<!--
***********************************************************************************************
Microsoft.NET.CrossGen.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (c) .NET Foundation. All rights reserved.
***********************************************************************************************
-->
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<!--
For ReadyToRun compilation, default to Crossgen for .NET Core 3.x and .NET 5. If PublishReadyToRunUseCrossgen2
is set to true in the project or on the command line, use Crossgen2 and default to composite mode. For .NET 6
and higher, always use Crossgen2 and default to non-composite mode.
-->
<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' == '.NETCoreApp' and '$(_TargetFrameworkVersionWithoutV)' >= '3.0'">
<PublishReadyToRunUseCrossgen2 Condition="'$(_TargetFrameworkVersionWithoutV)' >= '6.0'">true</PublishReadyToRunUseCrossgen2>
<PublishReadyToRunComposite Condition="'$(PublishReadyToRunComposite)' == '' and '$(PublishSingleFile)' == 'true' and '$(PublishReadyToRun)' == 'true' and '$(_TargetFrameworkVersionWithoutV)' >= '7.0'">true</PublishReadyToRunComposite>
<PublishReadyToRunComposite Condition="'$(PublishReadyToRunComposite)' == '' and '$(_TargetFrameworkVersionWithoutV)' >= '6.0'">false</PublishReadyToRunComposite>
<PublishReadyToRunComposite Condition="'$(PublishReadyToRunComposite)' == ''">true</PublishReadyToRunComposite>
<PublishReadyToRunComposite Condition="'$(PublishReadyToRunUseCrossgen2)' != 'true' or '$(SelfContained)' != 'true'">false</PublishReadyToRunComposite>
<PublishReadyToRunUseRuntimePackOptimizationData Condition="'$(PublishReadyToRunUseRuntimePackOptimizationData)' == ''">true</PublishReadyToRunUseRuntimePackOptimizationData>
<PublishReadyToRunPerfmapFormatVersion Condition="'$(PublishReadyToRunPerfmapFormatVersion)' == ''">1</PublishReadyToRunPerfmapFormatVersion>
</PropertyGroup>
<!--
============================================================
PrepOptimizer
Sets up the common infrastructure for the optimization phase
Outputs:
JitPath
Crossgen
============================================================
-->
<Target Name="PrepOptimizer"
DependsOnTargets="_RestoreCrossgen;"
Condition="$(SkipOptimization) != 'true' ">
<!-- Get the coreclr path -->
<ItemGroup>
<_CoreclrResolvedPath Include="@(CrossgenResolvedAssembliesToPublish)"
Condition="'%(CrossgenResolvedAssembliesToPublish.Filename)'=='coreclr'" />
<_CoreclrResolvedPath Include="@(CrossgenResolvedAssembliesToPublish)"
Condition="'%(CrossgenResolvedAssembliesToPublish.Filename)'=='libcoreclr'" />
<_JitResolvedPath Include="@(CrossgenResolvedAssembliesToPublish)"
Condition="'%(CrossgenResolvedAssembliesToPublish.Filename)'=='clrjit'" />
<_JitResolvedPath Include="@(CrossgenResolvedAssembliesToPublish)"
Condition="'%(CrossgenResolvedAssembliesToPublish.Filename)'=='libclrjit'" />
</ItemGroup>
<NETSdkError Condition="'@(_CoreclrResolvedPath->Count())' > 1"
ResourceName="MultipleFilesResolved"
FormatArguments="coreclr" />
<NETSdkError Condition="'@(_CoreclrResolvedPath)'== ''"
ResourceName="UnableToFindResolvedPath"
FormatArguments="coreclr" />
<NETSdkError Condition="'@(_JitResolvedPath->Count())' > 1"
ResourceName="MultipleFilesResolved"
FormatArguments="jit" />
<NETSdkError Condition="'@(_JitResolvedPath)'== ''"
ResourceName="UnableToFindResolvedPath"
FormatArguments="jit" />
<!-- Get the crossgen and jit path-->
<PropertyGroup>
<_CoreclrPath>@(_CoreclrResolvedPath)</_CoreclrPath>
<JitPath>@(_JitResolvedPath)</JitPath>
<_CoreclrDir>$([System.IO.Path]::GetDirectoryName($(_CoreclrPath)))</_CoreclrDir>
<_CoreclrPkgDir>$([System.IO.Path]::Combine($(_CoreclrDir),"..\..\..\"))</_CoreclrPkgDir>
<CrossgenDir>$([System.IO.Path]::Combine($(_CoreclrPkgDir),"tools"))</CrossgenDir>
<!-- TODO override with rid specific tools path for x-arch -->
<Crossgen>$([System.IO.Path]::Combine($(CrossgenDir),"crossgen"))</Crossgen>
<Crossgen Condition="$([MSBuild]::IsOSPlatform(`Windows`))">$([System.IO.Path]::Combine($(CrossgenDir),"crossgen.exe"))</Crossgen>
</PropertyGroup>
<NETSdkError Condition="!Exists($(Crossgen))"
ResourceName="UnableToFindResolvedPath"
FormatArguments="$(Crossgen)" />
<!-- Copy crossgen into the netcoreapp folder to ensure it can load Microsoft.DiaSymReader.Native when creating PDBs -->
<Copy SourceFiles="$(Crossgen)"
DestinationFolder="$(_NetCoreRefDir)"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
<PropertyGroup>
<Crossgen>$([System.IO.Path]::GetFullPath($([System.IO.Path]::Combine($(_NetCoreRefDir), $([System.IO.Path]::GetFileName($(Crossgen)))))))</Crossgen>
</PropertyGroup>
</Target>
<!--
============================================================
_RunOptimizer
Start the optimization phase
============================================================
-->
<Target Name="_RunOptimizer"
DependsOnTargets="_InitializeBasicProps;
_ComputeResolvedFilesToStoreTypes;
_SetupStageForCrossgen"
Condition="$(SkipOptimization) != 'true' ">
<ItemGroup>
<AssembliestoCrossgen Include="$(MSBuildProjectFullPath)">
<Properties>
CrossgenExe=$(Crossgen);
CrossgenJit=$(JitPath);
CrossgenInputAssembly=%(_ManagedResolvedFilesToOptimize.Fullpath);
CrossgenOutputAssembly=$(_RuntimeOptimizedDir)$(DirectorySeparatorChar)%(_ManagedResolvedFilesToOptimize.FileName)%(_ManagedResolvedFilesToOptimize.Extension);
CrossgenSubOutputPath=%(_ManagedResolvedFilesToOptimize.DestinationSubPath);
_RuntimeOptimizedDir=$(_RuntimeOptimizedDir);
PublishDir=$(StoreStagingDir);
CrossgenPlatformAssembliesPath=$(_RuntimeRefDir)$(PathSeparator)$(_NetCoreRefDir);
CreateProfilingSymbols=$(CreateProfilingSymbols);
StoreSymbolsStagingDir=$(StoreSymbolsStagingDir);
_RuntimeSymbolsDir=$(_RuntimeSymbolsDir)
</Properties>
</AssembliestoCrossgen>
</ItemGroup>
<!-- CrossGen the assemblies -->
<MSBuild Projects="@(AssembliestoCrossgen)"
Targets="RunCrossGen"
BuildInParallel="$(BuildInParallel)"
Condition="'@(_ManagedResolvedFilesToOptimize)' != ''"/>
</Target>
<!--
============================================================
RunCrossGen
Target Encapsulating the crossgen command
============================================================
-->
<Target Name="RunCrossGen"
DependsOnTargets="_InitializeBasicProps;">
<PropertyGroup>
<CrossgenProfilingSymbolsOutputDirectory>$([System.IO.Path]::GetDirectoryName($(_RuntimeSymbolsDir)\$(CrossgenSubOutputPath)))</CrossgenProfilingSymbolsOutputDirectory>
<CrossgenSymbolsStagingDirectory>$([System.IO.Path]::GetDirectoryName($(StoreSymbolsStagingDir)\$(CrossgenSubOutputPath)))</CrossgenSymbolsStagingDirectory>
<CrossgenCommandline>$(CrossgenExe) -nologo -readytorun -in "$(CrossgenInputAssembly)" -out "$(CrossgenOutputAssembly)" -jitpath "$(CrossgenJit)" -platform_assemblies_paths "$(CrossgenPlatformAssembliesPath)"</CrossgenCommandline>
<CreateProfilingSymbolsOptionName Condition="$([MSBuild]::IsOSPlatform(`Windows`))">CreatePDB</CreateProfilingSymbolsOptionName>
<CreateProfilingSymbolsOptionName Condition="'$(CreateProfilingSymbolsOptionName)' == ''">CreatePerfMap</CreateProfilingSymbolsOptionName>
</PropertyGroup>
<Message Text="CrossgenCommandline: $(CrossgenCommandline)"/>
<!--Optimization skip if the assembly is already present in the final output directory-->
<Exec
Command="$(CrossgenCommandline)"
Condition="!Exists($([System.IO.Path]::Combine($(PublishDir),$(CrossgenSubOutputPath))))"
IgnoreStandardErrorWarningFormat="true" />
<Copy SourceFiles = "$(CrossgenOutputAssembly)"
DestinationFiles="$(PublishDir)\$(CrossgenSubOutputPath)"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
Condition="!Exists($([System.IO.Path]::Combine($(PublishDir),$(CrossgenSubOutputPath))))">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
<!-- Create profiling symbols if requested -->
<MakeDir Directories="$(CrossgenProfilingSymbolsOutputDirectory)"
Condition="'$(CreateProfilingSymbols)' == 'true' and Exists($(CrossgenOutputAssembly))" />
<Exec Command="$(CrossgenExe) -nologo -readytorun -platform_assemblies_paths $(CrossgenPlatformAssembliesPath) -$(CreateProfilingSymbolsOptionName) $(CrossgenProfilingSymbolsOutputDirectory) $(CrossgenOutputAssembly)"
Condition="'$(CreateProfilingSymbols)' == 'true' and Exists($(CrossgenOutputAssembly))"
IgnoreStandardErrorWarningFormat="true" />
<ItemGroup>
<_ProfilingSymbols Include="$(CrossgenProfilingSymbolsOutputDirectory)\*"
Condition="'$(CreateProfilingSymbols)' == 'true'" />
</ItemGroup>
<Copy SourceFiles="@(_ProfilingSymbols)"
DestinationFolder="$(CrossgenSymbolsStagingDirectory)"
Condition="'$(CreateProfilingSymbols)' == 'true'"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
</Target>
<Target Name="_InitializeBasicProps">
<PropertyGroup>
<PathSeparator>$([System.IO.Path]::PathSeparator)</PathSeparator>
<DirectorySeparatorChar>$([System.IO.Path]::DirectorySeparatorChar)</DirectorySeparatorChar>
</PropertyGroup>
</Target>
<!--
============================================================
_GetCrossgenProps
Generates props used by Crossgen
============================================================
-->
<Target Name="_GetCrossgenProps"
Condition="$(SkipOptimization) != 'true' ">
<PropertyGroup>
<_CrossProjFileDir>$([System.IO.Path]::Combine($(ComposeWorkingDir),"Optimize"))</_CrossProjFileDir>
<_NetCoreRefDir>$([System.IO.Path]::Combine($(_CrossProjFileDir), "netcoreapp"))</_NetCoreRefDir> <!-- flat netcore app assemblies-->
</PropertyGroup>
<MakeDir Directories="$(_CrossProjFileDir)"/>
<PropertyGroup>
<_CrossProjAssetsFile>$([System.IO.Path]::Combine($(_CrossProjFileDir), project.assets.json))</_CrossProjAssetsFile>
</PropertyGroup>
</Target>
<!--
============================================================
_SetupStageForCrossgen
============================================================
-->
<Target Name="_SetupStageForCrossgen"
DependsOnTargets="_GetCrossgenProps;">
<PropertyGroup>
<_RuntimeRefDir>$([System.IO.Path]::Combine($(StoreWorkerWorkingDir), "runtimeref"))</_RuntimeRefDir> <!-- flat app managed assemblies -->
<_RuntimeOptimizedDir>$([System.IO.Path]::Combine($(StoreWorkerWorkingDir), "runtimopt"))</_RuntimeOptimizedDir> <!-- optimized app managed assemblies in nuget cache layout -->
<_RuntimeSymbolsDir>$([System.IO.Path]::Combine($(StoreWorkerWorkingDir), "runtimesymbols"))</_RuntimeSymbolsDir>
</PropertyGroup>
<ItemGroup>
<_ManagedResolvedFilesToOptimize Include="@(_ManagedResolvedFileToPublishCandidates)" />
</ItemGroup>
<MakeDir Directories="$(_RuntimeOptimizedDir)"/>
<MakeDir Directories="$(_RuntimeSymbolsDir)"
Condition="'$(CreateProfilingSymbols)' == 'true'" />
<!-- Copy managed files to a flat temp directory for passing it as ref -->
<Copy SourceFiles = "@(_ManagedResolvedFilesToOptimize)"
DestinationFolder="$(_RuntimeRefDir)"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
</Target>
<!--
============================================================
_RestoreCrossgen
Restores netcoreapp and publishes it to a temp directory
============================================================
-->
<Target Name="_RestoreCrossgen"
DependsOnTargets="PrepforRestoreForComposeStore;
_SetupStageForCrossgen;
ProcessFrameworkReferences;
ApplyImplicitVersions;
_ComputePackageReferencePublish"
Condition="$(SkipOptimization) != 'true' ">
<ItemGroup>
<!-- Filter package references to the one for the platform library, in order to find the right version -->
<PackageReferenceForCrossGen Include="@(PackageReference)" Condition="'%(Identity)' == '$(MicrosoftNETPlatformLibrary)'" />
</ItemGroup>
<MSBuild Projects="$(MSBuildProjectFullPath)"
Targets="Restore"
Properties="RuntimeIdentifiers=$(RuntimeIdentifier);
RestoreGraphProjectInput=$(MSBuildProjectFullPath);
RestoreOutputPath=$(_CrossProjFileDir);
StorePackageName=$(MicrosoftNETPlatformLibrary);
StorePackageVersion=%(PackageReferenceForCrossGen.Version);"/>
<!-- For future: Use ResolvePackageAssets instead of ResolveCopyLocalAssets, delete ResolveCopyLocalAssets task -->
<ResolveCopyLocalAssets Condition="'$(_TargetFrameworkVersionWithoutV)' < '3.0'"
AssetsFilePath="$(_CrossProjAssetsFile)"
TargetFramework="$(_TFM)"
RuntimeIdentifier="$(RuntimeIdentifier)"
PlatformLibraryName="$(MicrosoftNETPlatformLibrary)"
RuntimeFrameworks="@(RuntimeFramework)"
ExcludedPackageReferences="@(_ExcludeFromPublishPackageReference)"
IsSelfContained="$(SelfContained)"
PreserveStoreLayout="false">
<Output TaskParameter="ResolvedAssets" ItemName="CrossgenResolvedAssembliesToPublish" />
</ResolveCopyLocalAssets>
<GetPackageDirectory Condition="'$(_TargetFrameworkVersionWithoutV)' >= '3.0'"
Items="@(RuntimePack)"
AssetsFileWithAdditionalPackageFolders="$(_CrossProjAssetsFile)">
<Output TaskParameter="Output" ItemName="_CrossgenRuntimePack" />
</GetPackageDirectory>
<ResolveRuntimePackAssets Condition="'$(_TargetFrameworkVersionWithoutV)' >= '3.0'"
FrameworkReferences="@(FrameworkReference)"
ResolvedRuntimePacks="@(_CrossgenRuntimePack)"
DisableTransitiveFrameworkReferenceDownloads="$(DisableTransitiveFrameworkReferenceDownloads)">
<Output TaskParameter="RuntimePackAssets" ItemName="CrossgenResolvedAssembliesToPublish" />
</ResolveRuntimePackAssets>
<!-- Copy managed files to a flat temp directory for passing it as ref for crossgen -->
<Copy SourceFiles = "@(CrossgenResolvedAssembliesToPublish)"
DestinationFolder="$(_NetCoreRefDir)"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
</Target>
<PropertyGroup>
<MicrosoftNETCrossgenBuildTasksAssembly Condition="'$(MSBuildRuntimeType)' == 'Core'">$(MSBuildThisFileDirectory)..\tasks\net7.0\Microsoft.NET.Sdk.Crossgen.dll</MicrosoftNETCrossgenBuildTasksAssembly>
<MicrosoftNETCrossgenBuildTasksAssembly Condition="'$(MSBuildRuntimeType)' != 'Core'">$(MSBuildThisFileDirectory)..\tasks\net472\Microsoft.NET.Sdk.Crossgen.dll</MicrosoftNETCrossgenBuildTasksAssembly>
</PropertyGroup>
<!--
============================================================
CreateReadyToRunImages
Create ReadyToRun images for managed assemblies in _ResolvedFileToPublishAlways and _ResolvedFileToPublishPreserveNewest.
============================================================
-->
<Target Name="CreateReadyToRunImages"
Condition="'$(_TargetFrameworkVersionWithoutV)' >= '3.0' And '$(PublishReadyToRun)' == 'true' And '$(TargetFrameworkIdentifier)' == '.NETCoreApp'"
DependsOnTargets="_PrepareForReadyToRunCompilation;
_CreateR2RImages;
_CreateR2RSymbols">
<ItemGroup>
<R2RTelemetry Include="PublishReadyToRunUseCrossgen2" Value="$(PublishReadyToRunUseCrossgen2)" />
<R2RTelemetry Include="Crossgen2PackVersion" Value="%(ResolvedCrossgen2Pack.NuGetPackageVersion)" />
<R2RTelemetry Include="CompileListCount" Value="@(_ReadyToRunCompileList->Count())" />
<R2RTelemetry Include="FailedCount" Value="@(_ReadyToRunCompilationFailures->Count())" />
</ItemGroup>
<AllowEmptyTelemetry EventName="ReadyToRun" EventData="@(R2RTelemetry)" />
<NETSdkError Condition="'@(_ReadyToRunCompilationFailures)' != ''" ResourceName="ReadyToRunCompilationFailed" />
<NETSdkInformation Condition="'$(_ReadyToRunCompilerHasWarnings)' != ''" ResourceName="ReadyToRunCompilationHasWarnings_Info" />
<ItemGroup>
<!--
Note: we only remove the entries for the IL images and replace them with the entries for the R2R images.
We do not do the same for PDBs, because the native PDBs created by the R2R compiler complement the IL PDBs
and do not replace them. IL PDBs are still required for debugging. Native PDBs emitted by the R2R compiler are
only used for profiling purposes.
-->
<ResolvedFileToPublish Remove="@(_ReadyToRunCompositeBuildInput)" />
<ResolvedFileToPublish Remove="@(_ReadyToRunCompileList)" />
<ResolvedFileToPublish Include="@(_ReadyToRunFilesToPublish)" />
</ItemGroup>
</Target>
<!--
============================================================
_PrepareForReadyToRunCompilation
Prepare build for ReadyToRun compilations. Builds list of assemblies to compile, and computes paths to ReadyToRun compiler bits
============================================================
-->
<UsingTask Condition="'$(Crossgen2TasksOverriden)' != 'true'" TaskName="PrepareForReadyToRunCompilation" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_PrepareForReadyToRunCompilation" DependsOnTargets="ResolveReadyToRunCompilers;_ComputeManagedRuntimePackAssemblies;_ComputeAssembliesToPostprocessOnPublish">
<PropertyGroup>
<_ReadyToRunOutputPath>$(IntermediateOutputPath)R2R</_ReadyToRunOutputPath>
</PropertyGroup>
<MakeDir Directories="$(_ReadyToRunOutputPath)" />
<ItemGroup>
<_ReadyToRunImplementationAssemblies Include="@(ResolvedFileToPublish->WithMetadataValue('PostprocessAssembly', 'true'))" />
</ItemGroup>
<!-- Even if app is not self-contained, crossgen requires closure of implementation assemblies. Resolve conflicts
of the runtime pack assets as though we were copying them locally, and add them to the R2R implementation
assembly list. -->
<ItemGroup Condition="'$(SelfContained)' != 'true'">
<_ReadyToRunImplementationAssemblies Include="@(_ManagedRuntimePackAssembly)" ReferenceOnly="true" />
</ItemGroup>
<ResolvePackageFileConflicts Condition="'$(SelfContained)' != 'true'"
ReferenceCopyLocalPaths="@(_ReadyToRunImplementationAssemblies)">
<Output TaskParameter="ReferenceCopyLocalPathsWithoutConflicts" ItemName="_ReadyToRunImplementationAssembliesWithoutConflicts" />
</ResolvePackageFileConflicts>
<ItemGroup Condition="'$(SelfContained)' != 'true'">
<_ReadyToRunImplementationAssemblies Remove="@(_ReadyToRunImplementationAssemblies)" />
<_ReadyToRunImplementationAssemblies Include="@(_ReadyToRunImplementationAssembliesWithoutConflicts)" />
</ItemGroup>
<ItemGroup>
<_ReadyToRunPgoFiles Include="@(PublishReadyToRunPgoFiles)" />
<_ReadyToRunPgoFiles Include="@(RuntimePackAsset)"
Condition="'%(RuntimePackAsset.AssetType)' == 'pgodata' and '%(RuntimePackAsset.Extension)' == '.mibc' and '$(PublishReadyToRunUseRuntimePackOptimizationData)' == 'true'" />
</ItemGroup>
<PrepareForReadyToRunCompilation CrossgenTool="@(CrossgenTool)"
Crossgen2Tool="@(Crossgen2Tool)"
OutputPath="$(_ReadyToRunOutputPath)"
MainAssembly="@(IntermediateAssembly)"
Assemblies="@(_ReadyToRunImplementationAssemblies)"
ExcludeList="@(PublishReadyToRunExclude)"
EmitSymbols="$(PublishReadyToRunEmitSymbols)"
IncludeSymbolsInSingleFile="$(IncludeSymbolsInSingleFile)"
ReadyToRunUseCrossgen2="$(PublishReadyToRunUseCrossgen2)"
Crossgen2Composite="$(PublishReadyToRunComposite)"
PublishReadyToRunCompositeExclusions="@(PublishReadyToRunCompositeExclusions)">
<Output TaskParameter="ReadyToRunCompileList" ItemName="_ReadyToRunCompileList" />
<Output TaskParameter="ReadyToRunSymbolsCompileList" ItemName="_ReadyToRunSymbolsCompileList" />
<Output TaskParameter="ReadyToRunFilesToPublish" ItemName="_ReadyToRunFilesToPublish" />
<Output TaskParameter="ReadyToRunAssembliesToReference" ItemName="_ReadyToRunAssembliesToReference" />
<Output TaskParameter="ReadyToRunCompositeBuildReferences" ItemName="_ReadyToRunCompositeBuildReferences" />
<Output TaskParameter="ReadyToRunCompositeBuildInput" ItemName="_ReadyToRunCompositeBuildInput" />
</PrepareForReadyToRunCompilation>
</Target>
<UsingTask Condition="'$(Crossgen2TasksOverriden)' != 'true'" TaskName="ResolveReadyToRunCompilers" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="ResolveReadyToRunCompilers">
<ResolveReadyToRunCompilers RuntimePacks="@(ResolvedRuntimePack)"
Crossgen2Packs="@(ResolvedCrossgen2Pack)"
TargetingPacks="@(ResolvedTargetingPack)"
RuntimeGraphPath="$(RuntimeIdentifierGraphPath)"
NETCoreSdkRuntimeIdentifier="$(NETCoreSdkRuntimeIdentifier)"
EmitSymbols="$(PublishReadyToRunEmitSymbols)"
ReadyToRunUseCrossgen2="$(PublishReadyToRunUseCrossgen2)"
PerfmapFormatVersion="$(PublishReadyToRunPerfmapFormatVersion)">
<Output TaskParameter="CrossgenTool" ItemName="CrossgenTool" />
<Output TaskParameter="Crossgen2Tool" ItemName="Crossgen2Tool" />
</ResolveReadyToRunCompilers>
</Target>
<!--
============================================================
_CreateR2RImages
Compiles assemblies in the _ReadyToRunCompileList list into ReadyToRun images
============================================================
-->
<UsingTask Condition="'$(Crossgen2TasksOverriden)' != 'true'" TaskName="RunReadyToRunCompiler" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_CreateR2RImages"
Inputs="$(MSBuildAllProjects);@(_ReadyToRunCompileList);@(_ReadyToRunCompositeBuildInput);@(_ReadyToRunPgoFiles)"
Outputs="%(_ReadyToRunCompileList.OutputR2RImage);%(_ReadyToRunCompileList.OutputPDBImage)">
<RunReadyToRunCompiler CrossgenTool="@(CrossgenTool)"
Crossgen2Tool="@(Crossgen2Tool)"
UseCrossgen2="$(PublishReadyToRunUseCrossgen2)"
Crossgen2PgoFiles="@(_ReadyToRunPgoFiles)"
Crossgen2ExtraCommandLineArgs="$(PublishReadyToRunCrossgen2ExtraArgs)"
ImplementationAssemblyReferences="@(_ReadyToRunAssembliesToReference)"
ShowCompilerWarnings="$(PublishReadyToRunShowWarnings)"
CompilationEntry="@(_ReadyToRunCompileList)"
ContinueOnError="ErrorAndContinue"
ReadyToRunCompositeBuildReferences="@(_ReadyToRunCompositeBuildReferences)"
ReadyToRunCompositeBuildInput="@(_ReadyToRunCompositeBuildInput)">
<Output TaskParameter="ExitCode" PropertyName="_ReadyToRunCompilerExitCode" />
<Output TaskParameter="WarningsDetected" PropertyName="_ReadyToRunWarningsDetected" />
</RunReadyToRunCompiler>
<PropertyGroup>
<!-- Use distinct property here as any of the invocations can set it -->
<_ReadyToRunCompilerHasWarnings Condition="'$(_ReadyToRunWarningsDetected)' == 'true'">true</_ReadyToRunCompilerHasWarnings>
</PropertyGroup>
<ItemGroup>
<_ReadyToRunCompilationFailures Condition="'$(_ReadyToRunCompilerExitCode)' != '' And $(_ReadyToRunCompilerExitCode) != 0"
Include="@(_ReadyToRunCompileList)" />
</ItemGroup>
</Target>
<!--
============================================================
_CreateR2RSymbols
Emit native symbols for ReadyToRun images in the _ReadyToRunSymbolsCompileList list
============================================================
-->
<Target Name="_CreateR2RSymbols"
Inputs="$(MSBuildAllProjects);@(_ReadyToRunSymbolsCompileList)"
Outputs="%(_ReadyToRunSymbolsCompileList.OutputPDBImage)"
Condition="'$(PublishReadyToRunUseCrossgen2)' != 'true' or '@(Crossgen2Tool -> '%(IsVersion5)')' == 'true'">
<RunReadyToRunCompiler CrossgenTool="@(CrossgenTool)"
Crossgen2Tool="@(Crossgen2Tool)"
UseCrossgen2="$(PublishReadyToRunUseCrossgen2)"
Crossgen2ExtraCommandLineArgs="$(PublishReadyToRunCrossgen2ExtraArgs)"
ImplementationAssemblyReferences="@(_ReadyToRunAssembliesToReference)"
ShowCompilerWarnings="$(PublishReadyToRunShowWarnings)"
CompilationEntry="@(_ReadyToRunSymbolsCompileList)"
ContinueOnError="ErrorAndContinue">
<Output TaskParameter="ExitCode" PropertyName="_ReadyToRunCompilerExitCode" />
<Output TaskParameter="WarningsDetected" PropertyName="_ReadyToRunWarningsDetected" />
</RunReadyToRunCompiler>
<PropertyGroup>
<!-- Use distinct property here as any of the invocations can set it -->
<_ReadyToRunCompilerHasWarnings Condition="'$(_ReadyToRunWarningsDetected)' == 'true'">true</_ReadyToRunCompilerHasWarnings>
</PropertyGroup>
<ItemGroup>
<_ReadyToRunCompilationFailures Condition="'$(_ReadyToRunCompilerExitCode)' != '' And $(_ReadyToRunCompilerExitCode) != 0"
Include="@(_ReadyToRunSymbolsCompileList)" />
</ItemGroup>
</Target>
</Project>
|