|
<!--
***********************************************************************************************
Microsoft.NET.Publish.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (c) .NET Foundation. All rights reserved.
***********************************************************************************************
-->
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<DefaultCopyToPublishDirectoryMetadata Condition="'$(DefaultCopyToPublishDirectoryMetadata)' == ''">true</DefaultCopyToPublishDirectoryMetadata>
<_GetChildProjectCopyToPublishDirectoryItems Condition="'$(_GetChildProjectCopyToPublishDirectoryItems)' == ''">true</_GetChildProjectCopyToPublishDirectoryItems>
<IsPublishable Condition="'$(IsPublishable)' == ''">true</IsPublishable>
</PropertyGroup>
<!-- Trimming/AOT/publish* property configuration -->
<PropertyGroup>
<!-- PublishAot depends on PublishTrimmed. This must be set early enough for the KnownILLinkPack to be restored. -->
<PublishTrimmed Condition="'$(PublishTrimmed)' == '' And '$(PublishAot)' == 'true'">true</PublishTrimmed>
<IsTrimmable Condition="'$(IsTrimmable)' == '' and '$(IsAotCompatible)' == 'true'">true</IsTrimmable>
</PropertyGroup>
<ItemDefinitionGroup>
<ResolvedFileToPublish>
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</ResolvedFileToPublish>
</ItemDefinitionGroup>
<Target Name="_ComputeToolPackInputsToProcessFrameworkReferences" BeforeTargets="ProcessFrameworkReferences">
<!-- Keep this in sync with the warnings produced for RequiresILLinkPack in ProcessFrameworkReferences.cs.
Must be set late enough to see the inferred value of EnableSingleFileAnalyzer. -->
<PropertyGroup>
<_RequiresILLinkPack Condition="'$(_RequiresILLinkPack)' == '' And (
'$(PublishAot)' == 'true' Or
'$(IsAotCompatible)' == 'true' Or '$(EnableAotAnalyzer)' == 'true' Or
'$(PublishTrimmed)' == 'true' Or
'$(IsTrimmable)' == 'true' Or '$(EnableTrimAnalyzer)' == 'true' Or
'$(EnableSingleFileAnalyzer)' == 'true')">true</_RequiresILLinkPack>
<_RequiresILLinkPack Condition="'$(_RequiresILLinkPack)' == ''">false</_RequiresILLinkPack>
</PropertyGroup>
<!-- ProcessFrameworkReferences warns when the project settings introduce a dependency on a
tool pack that's not available for the target framework. For trimming, AOT, and single-file, the recommendation
is to multitarget the project to include a more recent TargetFramework. For correctly multitargeted
projects, the warning is usually just noise, so we silence it.
Correctly multitargeted projects include a TargetFramework that is compatible with the requested
functionality (trimming/AOT/single-file), and doesn't leave a "gap" where the incompatible TargetFramework's
assembly could be consumed from an app that uses the functionality. In other words, correctly multitargeted
projects should include at least one TFM that:
- supports the given functionality, and
- is no larger than the minimum non-EOL TargetFramework that supports this functionality.
The following logic determines whether the project is correctly multi-targeted based on its TargetFrameworks,
and silences the warning if it is. -->
<PropertyGroup>
<_FirstTargetFrameworkToSupportTrimming>net6.0</_FirstTargetFrameworkToSupportTrimming>
<_FirstTargetFrameworkToSupportAot>net7.0</_FirstTargetFrameworkToSupportAot>
<_FirstTargetFrameworkToSupportSingleFile>net6.0</_FirstTargetFrameworkToSupportSingleFile>
<!-- The min non-EOL TFM has already caught up with the first TFM to support trimming/singlefile. No need to compare against it. -->
<_MinNonEolTargetFrameworkForTrimming>$(_MinimumNonEolSupportedNetCoreTargetFramework)</_MinNonEolTargetFrameworkForTrimming>
<_MinNonEolTargetFrameworkForSingleFile>$(_MinimumNonEolSupportedNetCoreTargetFramework)</_MinNonEolTargetFrameworkForSingleFile>
<!-- Get the min non-EOL TFM that supports AOT. -->
<_MinNonEolTargetFrameworkForAot>$(_MinimumNonEolSupportedNetCoreTargetFramework)</_MinNonEolTargetFrameworkForAot>
<_MinNonEolTargetFrameworkForAot Condition="$([MSBuild]::IsTargetFrameworkCompatible('$(_FirstTargetFrameworkToSupportAot)', '$(_MinimumNonEolSupportedNetCoreTargetFramework)'))">$(_FirstTargetFrameworkToSupportAot)</_MinNonEolTargetFrameworkForAot>
</PropertyGroup>
<ItemGroup>
<_TargetFramework Include="$(TargetFrameworks)" />
<_DecomposedTargetFramework Include="@(_TargetFramework)">
<SupportsTrimming>$([MSBuild]::IsTargetFrameworkCompatible('%(Identity)', '$(_FirstTargetFrameworkToSupportTrimming)'))</SupportsTrimming>
<SupportedByMinNonEolTargetFrameworkForTrimming>$([MSBuild]::IsTargetFrameworkCompatible('$(_MinNonEolTargetFrameworkForTrimming)', '%(Identity)'))</SupportedByMinNonEolTargetFrameworkForTrimming>
<SupportsAot>$([MSBuild]::IsTargetFrameworkCompatible('%(Identity)', '$(_FirstTargetFrameworkToSupportAot)'))</SupportsAot>
<SupportedByMinNonEolTargetFrameworkForAot>$([MSBuild]::IsTargetFrameworkCompatible('$(_MinNonEolTargetFrameworkForAot)', '%(Identity)'))</SupportedByMinNonEolTargetFrameworkForAot>
<SupportsSingleFile>$([MSBuild]::IsTargetFrameworkCompatible('%(Identity)', '$(_FirstTargetFrameworkToSupportSingleFile)'))</SupportsSingleFile>
<SupportedByMinNonEolTargetFrameworkForSingleFile>$([MSBuild]::IsTargetFrameworkCompatible('$(_MinNonEolTargetFrameworkForSingleFile)', '%(Identity)'))</SupportedByMinNonEolTargetFrameworkForSingleFile>
</_DecomposedTargetFramework>
<_TargetFrameworkToSilenceIsTrimmableUnsupportedWarning
Include="@(_DecomposedTargetFramework)"
Condition="'%(SupportsTrimming)' == 'true' And '%(SupportedByMinNonEolTargetFrameworkForTrimming)' == 'true'" />
<_TargetFrameworkToSilenceIsAotCompatibleUnsupportedWarning
Include="@(_DecomposedTargetFramework->'%(Identity)')"
Condition="'%(SupportsAot)' == 'true' And '%(SupportedByMinNonEolTargetFrameworkForAot)' == 'true'" />
<_TargetFrameworkToSilenceEnableSingleFileAnalyzerUnsupportedWarning
Include="@(_DecomposedTargetFramework)"
Condition="'%(SupportsSingleFile)' == 'true' And '%(SupportedByMinNonEolTargetFrameworkForSingleFile)' == 'true'" />
</ItemGroup>
<PropertyGroup>
<!-- Don't warn if the library multitargets and includes TFM that's supported by trimming/AOT and is supported by the min non-EOL TFM that supports trimming/AOT. -->
<_SilenceIsTrimmableUnsupportedWarning Condition="'$(_SilenceIsTrimmableUnsupportedWarning)' == '' And
@(_TargetFrameworkToSilenceIsTrimmableUnsupportedWarning->Count()) > 0">true</_SilenceIsTrimmableUnsupportedWarning>
<_SilenceIsAotCompatibleUnsupportedWarning Condition="'$(_SilenceIsAotCompatibleUnsupportedWarning)' == '' And
@(_TargetFrameworkToSilenceIsAotCompatibleUnsupportedWarning->Count()) > 0">true</_SilenceIsAotCompatibleUnsupportedWarning>
<_SilenceEnableSingleFileAnalyzerUnsupportedWarning Condition="'$(_SilenceEnableSingleFileAnalyzerUnsupportedWarning)' == '' And
@(_TargetFrameworkToSilenceEnableSingleFileAnalyzerUnsupportedWarning->Count()) > 0">true</_SilenceEnableSingleFileAnalyzerUnsupportedWarning>
</PropertyGroup>
</Target>
<!--
============================================================
Publish
The main publish entry point.
============================================================
-->
<Import Project="Microsoft.NET.ClickOnce.targets" Condition="'$(PublishProtocol)' == 'ClickOnce'" />
<PropertyGroup>
<!-- We still need to resolve references even if we are not building during publish. -->
<!-- BuildOnlySettings are required for RAR to find satellites and dependencies -->
<_BeforePublishNoBuildTargets>
BuildOnlySettings;
_PreventProjectReferencesFromBuilding;
ResolveReferences;
PrepareResourceNames;
ComputeIntermediateSatelliteAssemblies;
ComputeEmbeddedApphostPaths;
</_BeforePublishNoBuildTargets>
<_CorePublishTargets>
PrepareForPublish;
ComputeAndCopyFilesToPublishDirectory;
$(PublishProtocolProviderTargets);
PublishItemsOutputGroup;
</_CorePublishTargets>
<_PublishNoBuildAlternativeDependsOn>$(_BeforePublishNoBuildTargets);$(_CorePublishTargets)</_PublishNoBuildAlternativeDependsOn>
</PropertyGroup>
<Target Name="_PublishBuildAlternative"
Condition="'$(NoBuild)' != 'true'"
DependsOnTargets="Build;$(_CorePublishTargets)" />
<Target Name="_PublishNoBuildAlternative"
Condition="'$(NoBuild)' == 'true'"
DependsOnTargets="$(_PublishNoBuildAlternativeDependsOn)" />
<Target Name="Publish"
Condition="$(IsPublishable) == 'true'"
DependsOnTargets="_PublishBuildAlternative;_PublishNoBuildAlternative" >
<!-- Ensure there is minimal verbosity output pointing to the publish directory and not just the
build step's minimal output. Otherwise there is no indication at minimal verbosity of where
the published assets were copied. -->
<Message Importance="High" Text="$(MSBuildProjectName) -> $([System.IO.Path]::GetFullPath('$(PublishDir)'))" />
<ItemGroup>
<PublishTelemetry Include="PublishReadyToRun" Value="$(PublishReadyToRun)" />
<PublishTelemetry Include="PublishTrimmed" Value="$(PublishTrimmed)" />
<PublishTelemetry Include="PublishSingleFile" Value="$(PublishSingleFile)" />
<PublishTelemetry Include="PublishAot" Value="$(PublishAot)" />
<PublishTelemetry Include="PublishProtocol" Value="$(PublishProtocol)" />
</ItemGroup>
<AllowEmptyTelemetry EventName="PublishProperties" EventData="@(PublishTelemetry)" />
</Target>
<!-- Don't let project reference resolution build project references in NoBuild case. -->
<Target Name="_PreventProjectReferencesFromBuilding">
<PropertyGroup>
<BuildProjectReferences>false</BuildProjectReferences>
</PropertyGroup>
</Target>
<!--
============================================================
PrepareForPublish
Prepare the prerequisites for publishing.
============================================================
-->
<Target Name="PrepareForPublish">
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' And '$(_IsExecutable)' != 'true'"
ResourceName="CannotHaveSingleFileWithoutExecutable" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' And '$(_IsExecutable)' == 'true' And '$(TargetFrameworkIdentifier)' != '.NETCoreApp'"
ResourceName="CanOnlyHaveSingleFileWithNetCoreApp" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' And
'$(IncludeSymbolsInSingleFile)' == 'true' And
'$(_TargetFrameworkVersionWithoutV)' >= '5.0' And '$(TargetFrameworkIdentifier)' == '.NETCoreApp'"
ResourceName="CannotIncludeSymbolsInSingleFile" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' and '$(RuntimeIdentifier)' == ''"
ResourceName="CannotHaveSingleFileWithoutRuntimeIdentifier" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' and '$(UseAppHost)' != 'true'"
ResourceName="CannotHaveSingleFileWithoutAppHost" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' And
'$(EnableCompressionInSingleFile)' == 'true' And
'$(_TargetFrameworkVersionWithoutV)' < '6.0'"
ResourceName="CompressionInSingleFileRequires60" />
<NETSdkError Condition="'$(PublishSingleFile)' == 'true' And
'$(EnableCompressionInSingleFile)' == 'true' And
'$(SelfContained)' != 'true'"
ResourceName="CompressionInSingleFileRequiresSelfContained" />
<NETSdkWarning Condition="'$(PublishProfileImported)' != 'true' and '$(PublishProfile)' != ''"
ResourceName="PublishProfileNotPresent"
FormatArguments="$(PublishProfile)"/>
<!-- Projects in a solution cannot have conflicting configurations. This checks if PublishRelease conflicted at runtime to avoid extra project evaluations.
SolutionExt is used to check if we are publishing a solution. Will be undefined if not.-->
<NETSdkError Condition="'$(_IsPublishing)' == 'true' and
'$(DOTNET_CLI_DISABLE_PUBLISH_AND_PACK_RELEASE)' != 'true' and
'$(DOTNET_CLI_LAZY_PUBLISH_AND_PACK_RELEASE_FOR_SOLUTIONS)' == 'true' and
'$(SolutionExt)' == '.sln' and
'$(_SolutionLevelPublishRelease)' != '$(PublishRelease)'"
ResourceName="SolutionProjectConfigurationsConflict"
FormatArguments="PublishRelease;$(ProjectName)"/>
<PropertyGroup>
<!-- Ensure any PublishDir has a trailing slash, so it can be concatenated -->
<PublishDir Condition="!HasTrailingSlash('$(PublishDir)')">$(PublishDir)\</PublishDir>
</PropertyGroup>
<MakeDir Directories="$(PublishDir)" />
</Target>
<!--
============================================================
ComputeAndCopyFilesToPublishDirectory
Computes the list of all files to copy to the publish directory and then publishes them.
============================================================
-->
<Target Name="ComputeAndCopyFilesToPublishDirectory"
DependsOnTargets="ComputeFilesToPublish;
CopyFilesToPublishDirectory" />
<!--
============================================================
CopyFilesToPublishDirectory
Copy all build outputs, satellites and other necessary files to the publish directory.
When publishing to a single file, only those files that are not bundled are copied.
The remaining files are directly written to the bundle file.
============================================================
-->
<Target Name="CopyFilesToPublishDirectory"
DependsOnTargets="_IncrementalCleanPublishDirectory;
_CopyResolvedFilesToPublishPreserveNewest;
_CopyResolvedFilesToPublishAlways;
_HandleFileConflictsForPublish" />
<!--
============================================================
_IncrementalCleanPublishDirectory
Remove files that were produced in a prior publish but weren't produced in the current publish.
============================================================
-->
<Target Name="_IncrementalCleanPublishDirectory"
DependsOnTargets="_GetCurrentAndPriorPublishFileWrites">
<!-- Subtract list of files produced in the prior publish from list of files produced in this publish. -->
<ItemGroup>
<_OrphanPublishFileWrites Include="@(_PriorPublishFileWrites)" Exclude="@(_CurrentPublishFileWrites)"/>
</ItemGroup>
<!-- Delete the orphaned files. -->
<Delete
Files="@(_OrphanPublishFileWrites)"
TreatErrorsAsWarnings="true">
<Output TaskParameter="DeletedFiles" ItemName="_OrphanFilesDeleted"/>
</Delete>
<!-- Write new list of current files back to clean file. -->
<WriteLinesToFile
File="$(IntermediateOutputPath)$(_PublishCleanFile)"
Lines="@(_CurrentPublishFileWrites)"
Overwrite="true"/>
</Target>
<!--
============================================================
_GetCurrentAndPriorPublishFileWrites
Get the list of files written in the previous publish and the list of files to be written in this publish.
============================================================
-->
<Target Name="_GetCurrentAndPriorPublishFileWrites" >
<PropertyGroup>
<_NormalizedPublishDir>$([MSBuild]::NormalizeDirectory($(PublishDir)))</_NormalizedPublishDir>
</PropertyGroup>
<Hash ItemstoHash="$(_NormalizedPublishDir)">
<Output TaskParameter="HashResult" PropertyName="_NormalizedPublishDirHash" />
</Hash>
<PropertyGroup>
<_PublishCleanFile Condition="'$(PublishCleanFile)'==''">PublishOutputs.$(_NormalizedPublishDirHash.Substring(0, 10)).txt</_PublishCleanFile>
</PropertyGroup>
<!-- Read in writes made by prior publish. -->
<ReadLinesFromFile File="$(IntermediateOutputPath)$(_PublishCleanFile)">
<Output TaskParameter="Lines" ItemName="_UnfilteredPriorPublishFileWrites"/>
</ReadLinesFromFile>
<ConvertToAbsolutePath Paths="@(_UnfilteredPriorPublishFileWrites)">
<Output TaskParameter="AbsolutePaths" ItemName="_UnfilteredAbsolutePriorPublishFileWrites"/>
</ConvertToAbsolutePath>
<!-- Find all files in the final output directory. -->
<FindUnderPath Path="$(_NormalizedPublishDir)" Files="@(_UnfilteredAbsolutePriorPublishFileWrites)" UpdateToAbsolutePaths="true">
<Output TaskParameter="InPath" ItemName="_PriorPublishFileWritesInOuput"/>
</FindUnderPath>
<!-- Remove duplicates from files produced in the previous publish. -->
<RemoveDuplicates Inputs="@(_PriorPublishFileWritesInOuput)" >
<Output TaskParameter="Filtered" ItemName="_PriorPublishFileWrites"/>
</RemoveDuplicates>
<ItemGroup>
<_CurrentPublishFileWritesUnfiltered Include="@(ResolvedFileToPublish->'$(_NormalizedPublishDir)%(RelativePath)')"/>
<_CurrentPublishFileWritesUnfiltered Include="$(_NormalizedPublishDir)$(AssemblyName)$(_NativeExecutableExtension)" Condition="'$(UseAppHost)' == 'true'"/>
</ItemGroup>
<ConvertToAbsolutePath Paths="@(_CurrentPublishFileWritesUnfiltered)">
<Output TaskParameter="AbsolutePaths" ItemName="_CurrentAbsolutePublishFileWritesUnfiltered"/>
</ConvertToAbsolutePath>
<!-- Remove duplicates from the files produced in this publish-->
<RemoveDuplicates Inputs="@(_CurrentAbsolutePublishFileWritesUnfiltered)" >
<Output TaskParameter="Filtered" ItemName="_CurrentPublishFileWrites"/>
</RemoveDuplicates>
</Target>
<!--
============================================================
_CopyResolvedFilesToPublishPreserveNewest
Copy _ResolvedFileToPublishPreserveNewest items to the publish directory
============================================================
-->
<Target Name="_CopyResolvedFilesToPublishPreserveNewest"
DependsOnTargets="_ComputeResolvedFilesToPublishTypes"
Inputs="@(_ResolvedFileToPublishPreserveNewest)"
Outputs="@(_ResolvedFileToPublishPreserveNewest->'$(PublishDir)%(RelativePath)')">
<!--
PreserveNewest means that we will only copy the source to the destination if the source is newer.
SkipUnchangedFiles is not used for that purpose because it will copy if the source and destination
differ by size too. Instead, this target uses inputs and outputs to only copy when the source is newer.
-->
<Copy SourceFiles = "@(_ResolvedFileToPublishPreserveNewest)"
DestinationFiles="@(_ResolvedFileToPublishPreserveNewest->'$(PublishDir)%(RelativePath)')"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
</Target>
<!--
============================================================
_CopyResolvedFilesToPublishAlways
Copy _ResolvedFileToPublishAlways items to the publish directory
============================================================
-->
<Target Name="_CopyResolvedFilesToPublishAlways"
DependsOnTargets="_ComputeResolvedFilesToPublishTypes">
<!--
Use SkipUnchangedFiles to prevent unnecessary file copies. The copy will occur if the
destination doesn't exist, the source is newer than the destination, or if the source and
destination differ by file size.
-->
<Copy SourceFiles = "@(_ResolvedFileToPublishAlways)"
DestinationFiles="@(_ResolvedFileToPublishAlways->'$(PublishDir)%(RelativePath)')"
SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
Retries="$(CopyRetryCount)"
RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)">
<Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
</Copy>
</Target>
<UsingTask TaskName="ResolveReadyToRunCompilers" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="ResolveReadyToRunCompilers">
<ResolveReadyToRunCompilers RuntimePacks="@(ResolvedRuntimePack)"
Crossgen2Packs="@(ResolvedCrossgen2Pack)"
TargetingPacks="@(ResolvedTargetingPack)"
RuntimeGraphPath="$(RuntimeIdentifierGraphPath)"
NETCoreSdkRuntimeIdentifier="$(NETCoreSdkRuntimeIdentifier)"
EmitSymbols="$(PublishReadyToRunEmitSymbols)"
ReadyToRunUseCrossgen2="$(PublishReadyToRunUseCrossgen2)"
PerfmapFormatVersion="$(PublishReadyToRunPerfmapFormatVersion)">
<Output TaskParameter="CrossgenTool" ItemName="CrossgenTool" />
<Output TaskParameter="Crossgen2Tool" ItemName="Crossgen2Tool" />
</ResolveReadyToRunCompilers>
</Target>
<!--
============================================================
_ComputeResolvedFilesToPublishTypes
Splits ResolvedFileToPublish items into 'PreserveNewest' and 'Always' buckets.
Then further splits those into 'Unbundled' buckets based on the single file setting.
============================================================
-->
<Target Name="_ComputeResolvedFilesToPublishTypes">
<ItemGroup>
<_ResolvedFileToPublishPreserveNewest Include="@(ResolvedFileToPublish)"
Condition="'%(ResolvedFileToPublish.CopyToPublishDirectory)'=='PreserveNewest'" />
<_ResolvedFileToPublishAlways Include="@(ResolvedFileToPublish)"
Condition="'%(ResolvedFileToPublish.CopyToPublishDirectory)'=='Always'" />
</ItemGroup>
<ItemGroup>
<_ResolvedUnbundledFileToPublishPreserveNewest
Include="@(_ResolvedFileToPublishPreserveNewest)"
Condition="'$(PublishSingleFile)' != 'true' or
'%(_ResolvedFileToPublishPreserveNewest.ExcludeFromSingleFile)'=='true'" />
<_ResolvedUnbundledFileToPublishAlways
Include="@(_ResolvedFileToPublishAlways)"
Condition="'$(PublishSingleFile)' != 'true' or
'%(_ResolvedFileToPublishAlways.ExcludeFromSingleFile)'=='true'" />
</ItemGroup>
</Target>
<!--
============================================================
ComputeFilesToPublish
Gathers all the files that need to be copied to the publish directory, including R2R and ILLinker transformations
============================================================
-->
<Target Name="ComputeFilesToPublish"
DependsOnTargets="PrepareForPublish;
ComputeResolvedFilesToPublishList;
ILLink;
CreateReadyToRunImages;
GeneratePublishDependencyFile;
GenerateSingleFileBundle">
</Target>
<!--
============================================================
ILLink
Initially an empty placeholder target. When trimming, this
will be redefined to invoke ILLink to perform IL trimming.
The placeholder exists to allow other targets to depend on it for ordering purposes.
============================================================
-->
<Target Name="ILLink" />
<PropertyGroup>
<CopyBuildOutputToPublishDirectory Condition="'$(CopyBuildOutputToPublishDirectory)'==''">true</CopyBuildOutputToPublishDirectory>
<CopyOutputSymbolsToPublishDirectory Condition="'$(CopyOutputSymbolsToPublishDirectory)'==''">true</CopyOutputSymbolsToPublishDirectory>
<IncludeSymbolsInSingleFile Condition="'$(IncludeSymbolsInSingleFile)' == ''">false</IncludeSymbolsInSingleFile>
</PropertyGroup>
<UsingTask TaskName="ResolveOverlappingItemGroupConflicts" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<!--
============================================================
ComputeResolvedFilesToPublishList
Gathers all the files that need to be copied to the publish directory.
============================================================
-->
<Target Name="ComputeResolvedFilesToPublishList"
DependsOnTargets="_ComputeResolvedCopyLocalPublishAssets;
_ComputeCopyToPublishDirectoryItems;
ComputeRefAssembliesToPublish">
<ItemGroup>
<!-- Copy the build product (.dll or .exe). -->
<ResolvedFileToPublish Include="@(IntermediateAssembly)"
Condition="'$(CopyBuildOutputToPublishDirectory)' == 'true'">
<RelativePath>@(IntermediateAssembly->'%(Filename)%(Extension)')</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy the deps file if using the build deps file. -->
<ResolvedFileToPublish Include="$(ProjectDepsFilePath)"
Condition="'$(GenerateDependencyFile)' == 'true' and '$(_UseBuildDependencyFile)' == 'true'">
<RelativePath>$(ProjectDepsFileName)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy the runtime config file. -->
<ResolvedFileToPublish Include="$(ProjectRuntimeConfigFilePath)"
Condition="'$(GenerateRuntimeConfigurationFiles)' == 'true' and '$(PublishAot)' != 'true'">
<RelativePath>$(ProjectRuntimeConfigFileName)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy the app.config (if any) -->
<ResolvedFileToPublish Include="@(AppConfigWithTargetPath)"
Condition="'$(CopyBuildOutputToPublishDirectory)' == 'true'">
<RelativePath>@(AppConfigWithTargetPath->'%(TargetPath)')</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy the debug information file (.pdb), if any -->
<ResolvedFileToPublish Include="@(_DebugSymbolsIntermediatePath)"
Condition="'$(_DebugSymbolsProduced)'=='true' and '$(CopyOutputSymbolsToPublishDirectory)'=='true'">
<RelativePath>@(_DebugSymbolsIntermediatePath->'%(Filename)%(Extension)')</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
<ExcludeFromSingleFile Condition="'$(IncludeSymbolsInSingleFile)'!='true'">true</ExcludeFromSingleFile>
</ResolvedFileToPublish>
<!-- Copy satellite assemblies. -->
<ResolvedFileToPublish Include="@(IntermediateSatelliteAssembliesWithTargetPath)">
<RelativePath>%(IntermediateSatelliteAssembliesWithTargetPath.Culture)\%(Filename)%(Extension)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy generated COM References. -->
<ResolvedFileToPublish Include="@(ReferenceComWrappersToCopyLocal)">
<RelativePath>%(Filename)%(Extension)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
</ItemGroup>
<!-- Remove conflicting items that appear in both _ResolvedCopyLocalPublishAssets and ResolvedFileToPublish
to ensure that we don't get duplicate files in the publish output. -->
<ResolveOverlappingItemGroupConflicts ItemGroup1="@(_ResolvedCopyLocalPublishAssets->Distinct())"
ItemGroup2="@(ResolvedFileToPublish->Distinct())"
PreferredPackages="$(PackageConflictPreferredPackages)">
<Output TaskParameter="RemovedItemGroup1" ItemName="_ResolvedCopyLocalPublishAssetsRemoved" />
<Output TaskParameter="RemovedItemGroup2" ItemName="ResolvedFileToPublishRemoved" />
</ResolveOverlappingItemGroupConflicts>
<ItemGroup>
<_ResolvedCopyLocalPublishAssets Remove="@(_ResolvedCopyLocalPublishAssetsRemoved)"/>
<ResolvedFileToPublish Remove="@(ResolvedFileToPublishRemoved)"/>
<!-- Copy the resolved copy local publish assets. -->
<ResolvedFileToPublish Include="@(_ResolvedCopyLocalPublishAssets)">
<RelativePath>%(_ResolvedCopyLocalPublishAssets.DestinationSubDirectory)%(Filename)%(Extension)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy the xml documentation (if enabled) -->
<ResolvedFileToPublish Include="@(FinalDocFile)"
Condition="'$(PublishDocumentationFile)' == 'true'">
<RelativePath>@(FinalDocFile->'%(Filename)%(Extension)')</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Copy all PackAsTool shims (if any) -->
<ResolvedFileToPublish Include="@(_EmbeddedApphostPaths->Distinct())">
<RelativePath>shims/%(_EmbeddedApphostPaths.ShimRuntimeIdentifier)/%(_EmbeddedApphostPaths.Filename)%(_EmbeddedApphostPaths.Extension)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ResolvedFileToPublish>
<!-- Filter files for PublishSingleFiles scenario -->
<_FilesToDrop Include="@(ResolvedFileToPublish)"
Condition="'$(PublishSingleFile)' == 'true' and
'%(ResolvedFileToPublish.DropFromSingleFile)' == 'true'"/>
<ResolvedFileToPublish Remove="@(_FilesToDrop)"/>
</ItemGroup>
</Target>
<!--
============================================================
_ResolveCopyLocalAssetsForPublish
Resolves the assets from packages to copy locally for publish.
We can just use the build's copy local assets if we can reuse the build deps file.
============================================================
-->
<UsingTask TaskName="ResolveCopyLocalAssets" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_ResolveCopyLocalAssetsForPublish"
DependsOnTargets="ResolveLockFileCopyLocalFiles;
_ComputeUseBuildDependencyFile;
_DefaultMicrosoftNETPlatformLibrary;
ResolveRuntimePackAssets;
_ComputePackageReferencePublish">
<!-- For future: Delete ResolveCopyLocalAssets task. Need to figure out how to get correct DestinationSubPath for
PreserveStoreLayout without this task, and how to handle RuntimeStorePackages. -->
<ResolveCopyLocalAssets AssetsFilePath="$(ProjectAssetsFile)"
TargetFramework="$(TargetFramework)"
RuntimeIdentifier="$(RuntimeIdentifier)"
PlatformLibraryName="$(MicrosoftNETPlatformLibrary)"
RuntimeFrameworks="@(RuntimeFramework)"
ExcludedPackageReferences="@(_ExcludeFromPublishPackageReference)"
RuntimeStorePackages="@(RuntimeStorePackages)"
PreserveStoreLayout="$(PreserveStoreLayout)"
ResolveRuntimeTargets="$(CopyLocalRuntimeTargetAssets)"
IsSelfContained="$(SelfContained)"
Condition="'$(PreserveStoreLayout)' == 'true' Or '@(RuntimeStorePackages)' != ''">
<Output TaskParameter="ResolvedAssets" ItemName="_ResolvedCopyLocalPublishAssets" />
</ResolveCopyLocalAssets>
<ItemGroup>
<_ResolvedCopyLocalPublishAssets Include="@(RuntimePackAsset)"
Condition="('$(SelfContained)' == 'true' Or '%(RuntimePackAsset.RuntimePackAlwaysCopyLocal)' == 'true') and '%(RuntimePackAsset.AssetType)' != 'pgodata'" />
</ItemGroup>
<ItemGroup Condition="'$(_UseBuildDependencyFile)' != 'true'">
<!-- Remove the apphost executable from publish copy local assets; we will copy the generated apphost instead -->
<_ResolvedCopyLocalPublishAssets Remove="@(_NativeRestoredAppHostNETCore)" />
</ItemGroup>
<ItemGroup Condition="'$(PreserveStoreLayout)' != 'true' And '@(RuntimeStorePackages)' == ''">
<_ResolvedCopyLocalPublishAssets Include="@(_ResolvedCopyLocalBuildAssets)"
Condition="'%(_ResolvedCopyLocalBuildAssets.CopyToPublishDirectory)' != 'false' "/>
</ItemGroup>
</Target>
<!--
============================================================
_ParseTargetManifestFiles
Parses the $(TargetManifestFiles) which contains a list of files into @(RuntimeStorePackages) items
which describes which packages should be excluded from publish since they are contained in the runtime store.
============================================================
-->
<UsingTask TaskName="ParseTargetManifests" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="_ParseTargetManifestFiles"
Condition="'$(TargetManifestFiles)' != ''"
Returns="@(RuntimeStorePackages)">
<ParseTargetManifests TargetManifestFiles="$(TargetManifestFiles)">
<Output TaskParameter="RuntimeStorePackages" ItemName="RuntimeStorePackages"/>
</ParseTargetManifests>
</Target>
<!--
============================================================
_FilterSatelliteResourcesForPublish
Filters the resolved resource assets for build to the given resource languages.
============================================================
-->
<Target Name="_FilterSatelliteResourcesForPublish"
Condition="'$(SatelliteResourceLanguages)' != ''">
<ItemGroup>
<_PublishSatelliteResources Include="@(_ResolvedCopyLocalPublishAssets)"
Condition="'%(_ResolvedCopyLocalPublishAssets.AssetType)' == 'resources'" />
</ItemGroup>
<JoinItems Left="@(_PublishSatelliteResources)" LeftKey="Culture" LeftMetadata="*"
Right="$(SatelliteResourceLanguages)" RightKey="" RightMetadata=""
ItemSpecToUse="Left">
<Output TaskParameter="JoinResult" ItemName="_FilteredPublishSatelliteResources" />
</JoinItems>
<ItemGroup Condition="'@(_PublishSatelliteResources)' != ''">
<_ResolvedCopyLocalPublishAssets Remove="@(_PublishSatelliteResources)" />
<_ResolvedCopyLocalPublishAssets Include="@(_FilteredPublishSatelliteResources)" />
</ItemGroup>
</Target>
<!--
============================================================
_ComputeResolvedCopyLocalPublishAssets
Computes the files from both project and package references.
============================================================
-->
<Target Name="_ComputeResolvedCopyLocalPublishAssets"
DependsOnTargets="_ResolveCopyLocalAssetsForPublish;
_FilterSatelliteResourcesForPublish">
<ItemGroup>
<_ResolvedCopyLocalPublishAssets Include="@(ReferenceCopyLocalPaths)"
Exclude="@(_ResolvedCopyLocalBuildAssets);@(RuntimePackAsset)"
Condition="('$(PublishReferencesDocumentationFiles)' == 'true' or '%(ReferenceCopyLocalPaths.Extension)' != '.xml') and '%(ReferenceCopyLocalPaths.Private)' != 'false'">
<DestinationSubPath>%(ReferenceCopyLocalPaths.DestinationSubDirectory)%(ReferenceCopyLocalPaths.Filename)%(ReferenceCopyLocalPaths.Extension)</DestinationSubPath>
</_ResolvedCopyLocalPublishAssets>
</ItemGroup>
</Target>
<!--
============================================================
_ComputeCopyToPublishDirectoryItems
============================================================
-->
<Target Name="_ComputeCopyToPublishDirectoryItems"
DependsOnTargets="GetCopyToPublishDirectoryItems">
<ItemGroup>
<ResolvedFileToPublish Include="@(_SourceItemsToCopyToPublishDirectoryAlways)">
<RelativePath>%(_SourceItemsToCopyToPublishDirectoryAlways.TargetPath)</RelativePath>
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
<IsKeyOutput Condition="'%(_SourceItemsToCopyToPublishDirectoryAlways.FullPath)' == '$(AppHostIntermediatePath)'">True</IsKeyOutput>
</ResolvedFileToPublish>
<ResolvedFileToPublish Include="@(_SourceItemsToCopyToPublishDirectory)">
<RelativePath>%(_SourceItemsToCopyToPublishDirectory.TargetPath)</RelativePath>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
<IsKeyOutput Condition="'%(_SourceItemsToCopyToPublishDirectory.FullPath)' == '$(AppHostIntermediatePath)'">True</IsKeyOutput>
</ResolvedFileToPublish>
</ItemGroup>
</Target>
<!--
============================================================
GetCopyToPublishDirectoryItems
Get all project items that may need to be transferred to the publish directory.
This includes baggage items from transitively referenced projects. It would appear
that this target computes full transitive closure of content items for all referenced
projects; however that is not the case. It only collects the content items from its
immediate children and not children of children.
See comment on GetCopyToOutputDirectoryItems, from which this logic was taken.
============================================================
-->
<Target Name="GetCopyToPublishDirectoryItems"
Returns="@(AllPublishItemsFullPathWithTargetPath)"
KeepDuplicateOutputs=" '$(MSBuildDisableGetCopyToPublishDirectoryItemsOptimization)' == '' "
DependsOnTargets="AssignTargetPaths;
DefaultCopyToPublishDirectoryMetadata;
_SplitProjectReferencesByFileExistence;
_GetProjectReferenceTargetFrameworkProperties">
<!-- In the general case, clients need very little of the metadata which is generated by invoking this target on this project and its children. For those
cases, we can immediately discard the unwanted metadata, reducing memory usage, particularly in very large and interconnected systems of projects.
However, if some client does require the original functionality, it is sufficient to set MSBuildDisableGetCopyToPublishDirectoryItemsOptimization to
a non-empty value and the original behavior will be restored. -->
<PropertyGroup Condition=" '$(MSBuildDisableGetCopyToPublishDirectoryItemsOptimization)' == '' ">
<_GCTPDIKeepDuplicates>false</_GCTPDIKeepDuplicates>
<_GCTPDIKeepMetadata>CopyToPublishDirectory;ExcludeFromSingleFile;TargetPath</_GCTPDIKeepMetadata>
</PropertyGroup>
<!-- Get items from child projects first. -->
<MSBuild Projects="@(_MSBuildProjectReferenceExistent)"
Targets="GetCopyToPublishDirectoryItems"
BuildInParallel="$(BuildInParallel)"
Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform); %(_MSBuildProjectReferenceExistent.SetTargetFramework)"
Condition="'@(_MSBuildProjectReferenceExistent)' != '' and '$(_GetChildProjectCopyToPublishDirectoryItems)' == 'true' and '%(_MSBuildProjectReferenceExistent.Private)' != 'false'"
ContinueOnError="$(ContinueOnError)"
RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove)$(_GlobalPropertiesToRemoveFromProjectReferences)">
<Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectPublishItemsWithTargetPath"/>
</MSBuild>
<!-- Target outputs must be full paths because they will be consumed by a different project. -->
<ItemGroup>
<_SourceItemsToCopyToPublishDirectoryAlways KeepDuplicates=" '$(_GCTPDIKeepDuplicates)' != 'false' "
KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_AllChildProjectPublishItemsWithTargetPath->'%(FullPath)')"
Condition="'%(_AllChildProjectPublishItemsWithTargetPath.CopyToPublishDirectory)'=='Always'"/>
<_SourceItemsToCopyToPublishDirectory KeepDuplicates=" '$(_GCTPDIKeepDuplicates)' != 'false' "
KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_AllChildProjectPublishItemsWithTargetPath->'%(FullPath)')"
Condition="'%(_AllChildProjectPublishItemsWithTargetPath.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<!-- Remove items which we will never again use - they just sit around taking up memory otherwise -->
<ItemGroup>
<_AllChildProjectPublishItemsWithTargetPath Remove="@(_AllChildProjectPublishItemsWithTargetPath)"/>
</ItemGroup>
<!-- Get items from this project last so that they will be copied last. -->
<ItemGroup>
<_SourceItemsToCopyToPublishDirectoryAlways KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(ContentWithTargetPath->'%(FullPath)')"
Condition="'%(ContentWithTargetPath.CopyToPublishDirectory)'=='Always'"/>
<_SourceItemsToCopyToPublishDirectory KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(ContentWithTargetPath->'%(FullPath)')"
Condition="'%(ContentWithTargetPath.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<ItemGroup>
<_SourceItemsToCopyToPublishDirectoryAlways KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(EmbeddedResource->'%(FullPath)')"
Condition="'%(EmbeddedResource.CopyToPublishDirectory)'=='Always'"/>
<_SourceItemsToCopyToPublishDirectory KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(EmbeddedResource->'%(FullPath)')"
Condition="'%(EmbeddedResource.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<ItemGroup>
<_CompileItemsToPublish Include="@(Compile->'%(FullPath)')"
Condition="'%(Compile.CopyToPublishDirectory)'=='Always' or '%(Compile.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<AssignTargetPath Files="@(_CompileItemsToPublish)" RootFolder="$(MSBuildProjectDirectory)">
<Output TaskParameter="AssignedFiles" ItemName="_CompileItemsToPublishWithTargetPath" />
</AssignTargetPath>
<ItemGroup>
<_SourceItemsToCopyToPublishDirectoryAlways KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_CompileItemsToPublishWithTargetPath)"
Condition="'%(_CompileItemsToPublishWithTargetPath.CopyToPublishDirectory)'=='Always'"/>
<_SourceItemsToCopyToPublishDirectory KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_CompileItemsToPublishWithTargetPath)"
Condition="'%(_CompileItemsToPublishWithTargetPath.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<ItemGroup>
<_SourceItemsToCopyToPublishDirectoryAlways KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_NoneWithTargetPath->'%(FullPath)')"
Condition="'%(_NoneWithTargetPath.CopyToPublishDirectory)'=='Always'"/>
<_SourceItemsToCopyToPublishDirectory KeepMetadata="$(_GCTPDIKeepMetadata)"
Include="@(_NoneWithTargetPath->'%(FullPath)')"
Condition="'%(_NoneWithTargetPath.CopyToPublishDirectory)'=='PreserveNewest'"/>
</ItemGroup>
<ItemGroup>
<AllPublishItemsFullPathWithTargetPath Include="@(_SourceItemsToCopyToPublishDirectoryAlways->'%(FullPath)');@(_SourceItemsToCopyToPublishDirectory->'%(FullPath)')"/>
</ItemGroup>
</Target>
<!--
============================================================
DefaultCopyToPublishDirectoryMetadata
If CopyToPublishDirectory isn't set on these items, the value should be taken from CopyToOutputDirectory.
This way, projects can just set "CopyToOutputDirectory = Always/PreserveNewest" and by default the item will be copied
to both the build output and publish directories.
============================================================
-->
<Target Name="DefaultCopyToPublishDirectoryMetadata"
DependsOnTargets="AssignTargetPaths"
Condition=" '$(DefaultCopyToPublishDirectoryMetadata)' == 'true' ">
<ItemGroup>
<ContentWithTargetPath Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='Always' and '%(ContentWithTargetPath.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</ContentWithTargetPath>
<ContentWithTargetPath Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' and '%(ContentWithTargetPath.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</ContentWithTargetPath>
<EmbeddedResource Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='Always' and '%(EmbeddedResource.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</EmbeddedResource>
<EmbeddedResource Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='PreserveNewest' and '%(EmbeddedResource.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</EmbeddedResource>
<Compile Condition="'%(Compile.CopyToOutputDirectory)'=='Always' and '%(Compile.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</Compile>
<Compile Condition="'%(Compile.CopyToOutputDirectory)'=='PreserveNewest' and '%(Compile.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</Compile>
<_NoneWithTargetPath Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='Always' and '%(_NoneWithTargetPath.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</_NoneWithTargetPath>
<_NoneWithTargetPath Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' and '%(_NoneWithTargetPath.CopyToPublishDirectory)' == ''">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</_NoneWithTargetPath>
</ItemGroup>
</Target>
<PropertyGroup Condition="'$(SelfContained)' == 'true'">
<_ComputeManagedRuntimePackAssembliesIfSelfContained>_ComputeManagedRuntimePackAssemblies</_ComputeManagedRuntimePackAssembliesIfSelfContained>
</PropertyGroup>
<!-- Determine the managed assembly subset of ResolvedFileToPublish that should be post-processed by linker, and ready to run compilation -->
<Target Name="_ComputeAssembliesToPostprocessOnPublish"
DependsOnTargets="_ComputeUserRuntimeAssemblies;$(_ComputeManagedRuntimePackAssembliesIfSelfContained)">
<!--
Default set of files to post-process correspond to the items that would be designated
as managed runtime assemblies in .deps.json, and published to root of the application.
RuntimeTargets and satellite assemblies are excluded. Currently, both linker and ready
to run require a RID, so there will not be RuntimeTargets. Linker could conceptually
operate without a RID, but would not know how to handle multiple assemblies with same
identity.
-->
<ItemGroup>
<!-- Assemblies from packages -->
<_ManagedRuntimeAssembly Include="@(RuntimeCopyLocalItems)" />
<!-- Assemblies from other references -->
<_ManagedRuntimeAssembly Include="@(UserRuntimeAssembly)" />
<!-- Assembly produced by this project -->
<_ManagedRuntimeAssembly Include="@(IntermediateAssembly)" />
</ItemGroup>
<!-- Assemblies from runtime packs for self-contained apps -->
<ItemGroup Condition="'$(SelfContained)' == 'true'">
<_ManagedRuntimeAssembly Include="@(_ManagedRuntimePackAssembly)" />
</ItemGroup>
<!--
Match above with ResolvedFileToPublish. Some of above would have been excluded from publish in
various ways and should be excluded from the list of files to postprocess as well. Furthermore,
the metadata must match ResolvedFileToPublish as the tools modify or remove these items in that
list to implement their post-processing.
-->
<JoinItems Left="@(_ManagedRuntimeAssembly)" Right="@(ResolvedFileToPublish)" RightMetadata="*">
<Output TaskParameter="JoinResult" ItemName="_AssemblyToPostprocessOnPublish" />
</JoinItems>
<!--
Set PostprocessAssembly=true metadata on ResolvedFileToPublish, which will be honored by linker
and crossgen.
Assemblies injected into ResolvedFileToPublish outside the set above (such as razor views) are
responsible for setting this metadata to opt in to post-processing.
-->
<ItemGroup>
<ResolvedFileToPublish Remove="@(_AssemblyToPostprocessOnPublish)" />
<ResolvedFileToPublish Include="@(_AssemblyToPostprocessOnPublish)" PostprocessAssembly="true" />
</ItemGroup>
</Target>
<Target Name="_ComputeManagedRuntimePackAssemblies" Returns="@(_ManagedRuntimePackAssembly)">
<ItemGroup>
<!-- Special case for System.Private.Corelib due to https://github.com/dotnet/core-setup/issues/7728 -->
<_ManagedRuntimePackAssembly Include="@(RuntimePackAsset)"
Condition="'%(RuntimePackAsset.AssetType)' == 'runtime'
or '%(RuntimePackAsset.Filename)' == 'System.Private.Corelib'" />
</ItemGroup>
</Target>
<Target Name="_ComputeUseBuildDependencyFile"
DependsOnTargets="_ComputePackageReferencePublish;
_ParseTargetManifestFiles">
<!-- Check to see whether we can re-use the .deps.json file from the build for publish, or whether we have to
generate a different one. -->
<PropertyGroup>
<_TrimRuntimeAssets Condition="'$(PublishSingleFile)' == 'true' and '$(SelfContained)' == 'true'">true</_TrimRuntimeAssets>
<_UseBuildDependencyFile Condition="'@(_ExcludeFromPublishPackageReference)' == '' and
'@(RuntimeStorePackages)' == '' and
'$(PreserveStoreLayout)' != 'true' and
'$(PublishTrimmed)' != 'true' and
'$(_TrimRuntimeAssets)' != 'true'">true</_UseBuildDependencyFile>
</PropertyGroup>
</Target>
<!--
============================================================
GenerateSingleFileBundle
Bundle the ResolvedFileToPublish items into one file in PublishDir
(except those marked ExcludeFromSingleFile)
============================================================
-->
<Target Name="_ComputeFilesToBundle"
DependsOnTargets="_HandleFileConflictsForPublish"
Condition="'$(PublishSingleFile)' == 'true'">
<ItemGroup>
<_FilesToBundle Include="@(ResolvedFileToPublish)"
Condition="'%(ResolvedFileToPublish.ExcludeFromSingleFile)' != 'true'"/>
<ResolvedFileToPublish Remove="@(_FilesToBundle)"/>
</ItemGroup>
<PropertyGroup>
<PublishedSingleFileName>$(AssemblyName)$(_NativeExecutableExtension)</PublishedSingleFileName>
<PublishedSingleFilePath>$(PublishDir)$(PublishedSingleFileName)</PublishedSingleFilePath>
</PropertyGroup>
</Target>
<Target Name="PrepareForBundle"
DependsOnTargets="_ComputeFilesToBundle"
Condition="'$(PublishSingleFile)' == 'true'">
<ItemGroup>
<FilesToBundle Include="@(_FilesToBundle)"/>
</ItemGroup>
<PropertyGroup>
<AppHostFile>$(PublishedSingleFileName)</AppHostFile>
</PropertyGroup>
</Target>
<Target Name="_GenerateSingleFileBundleInputCache">
<ItemGroup>
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(PublishedSingleFilePath)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(TraceSingleFileBundler)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(IncludeSymbolsInSingleFile)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(IncludeAllContentForSelfExtract)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(IncludeNativeLibrariesForSelfExtract)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(EnableCompressionInSingleFile)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(PublishedSingleFileName)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(RuntimeIdentifier)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(PublishDir)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="$(_TargetFrameworkVersionWithoutV)" />
<_GenerateSingleFileBundlePropertyInputsCacheToHash Include="@(FilesToBundle)" />
</ItemGroup>
<Hash ItemsToHash="@(_GenerateSingleFileBundlePropertyInputsCacheToHash)">
<Output TaskParameter="HashResult" PropertyName="_GenerateSingleFileBundlePropertyInputsCacheHash" />
</Hash>
<WriteLinesToFile
Lines="$(_GenerateSingleFileBundlePropertyInputsCacheHash)"
File="$(_GenerateSingleFileBundlePropertyInputsCache)"
Overwrite="true"
WriteOnlyWhenDifferent="true" />
</Target>
<UsingTask TaskName="GenerateBundle" AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="GenerateSingleFileBundle"
Condition="'$(PublishSingleFile)' == 'true'"
DependsOnTargets="_ComputeFilesToBundle;PrepareForBundle;_GenerateSingleFileBundleInputCache"
Inputs="@(FilesToBundle);$(_GenerateSingleFileBundlePropertyInputsCache)"
Outputs="$(PublishedSingleFilePath)">
<PropertyGroup>
<TraceSingleFileBundler Condition="'$(TraceSingleFileBundler)' == ''">false</TraceSingleFileBundler>
<IncludeSymbolsInSingleFile Condition="'$(IncludeSymbolsInSingleFile)' == ''">false</IncludeSymbolsInSingleFile>
<IncludeAllContentForSelfExtract Condition="'$(IncludeAllContentForSelfExtract)' == ''">false</IncludeAllContentForSelfExtract>
<IncludeNativeLibrariesForSelfExtract Condition="'$(IncludeNativeLibrariesForSelfExtract)' == ''">$(IncludeAllContentForSelfExtract)</IncludeNativeLibrariesForSelfExtract>
<EnableCompressionInSingleFile Condition="'$(EnableCompressionInSingleFile)' == ''">false</EnableCompressionInSingleFile>
</PropertyGroup>
<NETSdkError Condition="'$(IncludeAllContentForSelfExtract)' == 'true' And '$(IncludeNativeLibrariesForSelfExtract)' != 'true'"
ResourceName="CannotIncludeAllContentButNotNativeLibrariesInSingleFile" />
<GenerateBundle FilesToBundle="@(FilesToBundle)"
AppHostName="$(PublishedSingleFileName)"
IncludeSymbols="$(IncludeSymbolsInSingleFile)"
EnableCompressionInSingleFile="$(EnableCompressionInSingleFile)"
IncludeNativeLibraries="$(IncludeNativeLibrariesForSelfExtract)"
IncludeAllContent="$(IncludeAllContentForSelfExtract)"
TargetFrameworkVersion="$(_TargetFrameworkVersionWithoutV)"
RuntimeIdentifier="$(RuntimeIdentifier)"
OutputDir="$(PublishDir)"
ShowDiagnosticOutput="$(TraceSingleFileBundler)">
<Output TaskParameter="ExcludedFiles" ItemName="_FilesExcludedFromBundle"/>
</GenerateBundle>
<ItemGroup>
<ResolvedFileToPublish Include="@(_FilesExcludedFromBundle)"/>
<!-- ResolvedFileToPublish shouldn't include PublishedSingleFilePath, since the single-file bundle is written directly to the publish directory -->
</ItemGroup>
</Target>
<Target Name="_ComputeIntermediateDepsFilePath">
<PropertyGroup>
<!-- IntermediateDepsFilePath is the location where the deps.json file is originally created -->
<IntermediateDepsFilePath Condition=" '$(PublishDepsFilePath)' != ''">$(PublishDepsFilePath)</IntermediateDepsFilePath >
<IntermediateDepsFilePath Condition=" '$(PublishDepsFilePath)' == ''">$(IntermediateOutputPath)$(ProjectDepsFileName)</IntermediateDepsFilePath >
</PropertyGroup>
</Target>
<Target Name="_GeneratePublishDependencyFileInputCache"
DependsOnTargets="_ComputeIntermediateDepsFilePath">
<ItemGroup>
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(PublishDepsFilePath)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(PublishSingleFile)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(MSBuildProjectFullPath)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(ProjectAssetsFile)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(IntermediateDepsFilePath)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(TargetFramework)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(AssemblyName)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(TargetExt)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(Version)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(IncludeMainProjectInDepsFile)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(RuntimeIdentifier)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(MicrosoftNETPlatformLibrary)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(SelfContained)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(IncludeFileVersionsInDependencyFile)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(RuntimeIdentifierGraphPath)" />
<_GeneratePublishDependencyFilePropertyInputsCacheToHash Include="$(IncludeProjectsNotInAssetsFileInDepsFile)" />
</ItemGroup>
<Hash ItemsToHash="@(_GeneratePublishDependencyFilePropertyInputsCacheToHash)">
<Output TaskParameter="HashResult" PropertyName="_GeneratePublishDependencyFilePropertyInputsCacheHash" />
</Hash>
<WriteLinesToFile
Lines="$(_GeneratePublishDependencyFilePropertyInputsCacheHash)"
File="$(_GeneratePublishDependencyFilePropertyInputsCache)"
Overwrite="True"
WriteOnlyWhenDifferent="True" />
<ItemGroup>
<FileWrites Include="$(_GeneratePublishDependencyFilePropertyInputsCache)" />
</ItemGroup>
</Target>
<!--
============================================================
_GeneratePublishDependencyFile
Generates the $(project).deps.json file for a published app
============================================================
-->
<Target Name="GeneratePublishDependencyFile"
DependsOnTargets="_ComputeUseBuildDependencyFile;
_ComputeIntermediateDepsFilePath;
_DefaultMicrosoftNETPlatformLibrary;
_HandlePackageFileConflicts;
_HandlePackageFileConflictsForPublish;
_ComputeReferenceAssemblies;
_ComputeUserRuntimeAssemblies;
ResolveRuntimePackAssets;
_ComputePackageReferencePublish;
_GeneratePublishDependencyFileInputCache"
Condition="'$(GenerateDependencyFile)' == 'true' and '$(_UseBuildDependencyFile)' != 'true' and '$(PublishAot)' != 'true'"
Inputs="$(ProjectAssetsFile);$(ProjectAssetsCacheFile);$(MSBuildAllProjects);$(_GeneratePublishDependencyFilePropertyInputsCache)"
Outputs="$(IntermediateDepsFilePath)">
<PropertyGroup>
<!-- PublishDepsFilePath is the location where the deps.json resides when published
PublishDepsFilePath is empty (by default) for PublishSingleFile, since the deps.json file is embedded within the single-file bundle -->
<PublishDepsFilePath Condition=" '$(PublishDepsFilePath)' == '' And '$(PublishSingleFile)' != 'true'">$(PublishDir)$(ProjectDepsFileName)</PublishDepsFilePath>
<_IsSingleFilePublish Condition="'$(PublishSingleFile)' == ''">false</_IsSingleFilePublish>
<_IsSingleFilePublish Condition="'$(PublishSingleFile)' != ''">$(PublishSingleFile)</_IsSingleFilePublish>
</PropertyGroup>
<ItemGroup>
<ResolvedCompileFileDefinitions Remove="@(_PublishConflictPackageFiles)" Condition="'%(_PublishConflictPackageFiles.ConflictItemType)' == 'Reference'" />
<RuntimeTargetsCopyLocalItems Remove="@(_PublishConflictPackageFiles)" Condition="'%(_PublishConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<RuntimePackAsset Remove="@(_PublishConflictPackageFiles)" Condition="'%(_PublishConflictPackageFiles.ConflictItemType)' != 'Reference'" />
<_ResolvedNuGetFilesForPublish Include="@(NativeCopyLocalItems)" Condition="'%(NativeCopyLocalItems.CopyToPublishDirectory)' != 'false'" />
<_ResolvedNuGetFilesForPublish Include="@(ResourceCopyLocalItems)" Condition="'%(ResourceCopyLocalItems.CopyToPublishDirectory)' != 'false'" />
<_ResolvedNuGetFilesForPublish Include="@(RuntimeCopyLocalItems)" Condition="'%(RuntimeCopyLocalItems.CopyToPublishDirectory)' != 'false'" />
<_ResolvedNuGetFilesForPublish Remove="@(_PublishConflictPackageFiles)" Condition="'%(_PublishConflictPackageFiles.ConflictItemType)' != 'Reference'" />
</ItemGroup>
<GenerateDepsFile ProjectPath="$(MSBuildProjectFullPath)"
AssetsFilePath="$(ProjectAssetsFile)"
DepsFilePath="$(IntermediateDepsFilePath)"
TargetFramework="$(TargetFramework)"
AssemblyName="$(AssemblyName)"
AssemblyExtension="$(TargetExt)"
AssemblyVersion="$(Version)"
AssemblySatelliteAssemblies="@(IntermediateSatelliteAssembliesWithTargetPath)"
ReferencePaths="@(ReferencePath)"
ReferenceDependencyPaths="@(ReferenceDependencyPaths)"
ReferenceSatellitePaths="@(ReferenceSatellitePaths)"
ReferenceAssemblies="@(_ReferenceAssemblies)"
RuntimePackAssets="@(RuntimePackAsset)"
IncludeMainProject="$(IncludeMainProjectInDepsFile)"
RuntimeIdentifier="$(RuntimeIdentifier)"
PlatformLibraryName="$(MicrosoftNETPlatformLibrary)"
RuntimeFrameworks="@(RuntimeFramework)"
CompilerOptions="@(DependencyFileCompilerOptions)"
RuntimeStorePackages="@(RuntimeStorePackages)"
CompileReferences="@(ResolvedCompileFileDefinitions)"
ResolvedNuGetFiles="@(_ResolvedNuGetFilesForPublish)"
ResolvedRuntimeTargetsFiles="@(RuntimeTargetsCopyLocalItems)"
UserRuntimeAssemblies="@(UserRuntimeAssembly)"
IsSelfContained="$(SelfContained)"
IsSingleFile="$(_IsSingleFilePublish)"
IncludeRuntimeFileVersions="$(IncludeFileVersionsInDependencyFile)"
RuntimeGraphPath="$(RuntimeIdentifierGraphPath)"
IncludeProjectsNotInAssetsFile="$(IncludeProjectsNotInAssetsFileInDepsFile)"/>
<ItemGroup>
<ResolvedFileToPublish Include="$(IntermediateDepsFilePath)">
<RelativePath>$(ProjectDepsFileName)</RelativePath>
</ResolvedFileToPublish>
</ItemGroup>
</Target>
<!--
============================================================
ComputeEmbeddedApphostPaths
When no build flag is set, EmbeddedApphostPaths is not available. Compute EmbeddedApphostPaths is required to find build asset.
============================================================
-->
<UsingTask TaskName="Microsoft.NET.Build.Tasks.GetEmbeddedApphostPaths"
AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="ComputeEmbeddedApphostPaths">
<ItemGroup>
<_PackAsToolShimRuntimeIdentifiers Condition="@(_PackAsToolShimRuntimeIdentifiers) ==''" Include="$(PackAsToolShimRuntimeIdentifiers)"/>
</ItemGroup>
<GetEmbeddedApphostPaths
PackagedShimOutputDirectory="$(PackagedShimOutputRootDirectory)/shims/$(TargetFramework)"
ShimRuntimeIdentifiers="@(_PackAsToolShimRuntimeIdentifiers)"
ToolCommandName="$(ToolCommandName)"
>
<Output TaskParameter="EmbeddedApphostPaths" ItemName="_EmbeddedApphostPaths" />
</GetEmbeddedApphostPaths>
</Target>
<!--
============================================================
ComputeFilesCopiedToPublishDir
Gathers all the files that will be copied to the publish directory. This is used by wapproj and is required for back compat.
============================================================
-->
<Target Name="ComputeFilesCopiedToPublishDir"
DependsOnTargets="ComputeResolvedFilesToPublishList;
_ComputeFilesToBundle">
<ItemGroup>
<FilesCopiedToPublishDir Include="@(ResolvedFileToPublish)"/>
<FilesCopiedToPublishDir Include="$(PublishedSingleFilePath)" RelativePath="$(PublishedSingleFileName)" IsKeyOutput="true" Condition="'$(PublishSingleFile)' == 'true'"/>
<!-- Wapproj handles adding the correct deps.json file, so remove it here to avoid duplicates. -->
<FilesCopiedToPublishDir Remove="@(FilesCopiedToPublishDir)" Condition="'%(FilesCopiedToPublishDir.Filename)%(FilesCopiedToPublishDir.Extension)' == '$(ProjectDepsFileName)'"/>
</ItemGroup>
</Target>
<!--
============================================================
PublishItemsOutputGroup
Emit an output group containing all files that get published. This will be consumed by VS installer projects.
============================================================
-->
<PropertyGroup>
<PublishItemsOutputGroupDependsOn>
$(PublishItemsOutputGroupDependsOn);
ResolveReferences;
ComputeResolvedFilesToPublishList;
_ComputeFilesToBundle;
</PublishItemsOutputGroupDependsOn>
</PropertyGroup>
<UsingTask TaskName="Microsoft.NET.Build.Tasks.GetPublishItemsOutputGroupOutputs"
AssemblyFile="$(MicrosoftNETBuildTasksAssembly)" />
<Target Name="PublishItemsOutputGroup" DependsOnTargets="$(PublishItemsOutputGroupDependsOn)" Returns="@(PublishItemsOutputGroupOutputs)">
<GetPublishItemsOutputGroupOutputs
ResolvedFileToPublish="@(ResolvedFileToPublish)"
PublishDir="$(PublishDir)"
>
<Output TaskParameter="PublishItemsOutputGroupOutputs" ItemName="PublishItemsOutputGroupOutputs" />
</GetPublishItemsOutputGroupOutputs>
<ItemGroup>
<PublishItemsOutputGroupOutputs Include="$(PublishedSingleFilePath)"
TargetPath="$(PublishedSingleFileName)"
IsKeyOutput="true"
Condition="'$(PublishSingleFile)' == 'true'"
OutputPath="$(PublishedSingleFilePath)"
OutputGroup="PublishItemsOutputGroup" />
</ItemGroup>
</Target>
<!--
This target exists for back-compat with Azure Functions SDK: https://github.com/dotnet/cli/issues/10363
Because build copy-local now behaves the same as publish with respect to package dependency resolution,
the Azure Functions SDK doesn't need to resolve publish assets for build.
TODO: Remove this target when no longer needed as a workaround.
-->
<Target Name="RunResolvePublishAssemblies" />
<!--
============================================================
_CheckForLanguageAndPublishFeatureCombinationSupport
Block unsupported language and feature combination.
============================================================
-->
<Target Name="_CheckForLanguageAndPublishFeatureCombinationSupport"
Condition="$(IsPublishable) == 'true'"
BeforeTargets="Publish;PrepareForPublish">
<NETSdkError Condition="('$(Language)' == 'C++' and '$(_EnablePackageReferencesInVCProjects)' != 'true') and '$(TargetFrameworkIdentifier)' == '.NETCoreApp'"
ResourceName="NoSupportCppPublishDotnetCore" />
</Target>
</Project>
|