|
<!--
***********************************************************************************************
Microsoft.Common.props
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->
<Project>
<PropertyGroup>
<ImportByWildcardBeforeMicrosoftCommonProps Condition="'$(ImportByWildcardBeforeMicrosoftCommonProps)' == ''">true</ImportByWildcardBeforeMicrosoftCommonProps>
<ImportByWildcardAfterMicrosoftCommonProps Condition="'$(ImportByWildcardAfterMicrosoftCommonProps)' == ''">true</ImportByWildcardAfterMicrosoftCommonProps>
<ImportUserLocationsByWildcardBeforeMicrosoftCommonProps Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCommonProps)' == ''">true</ImportUserLocationsByWildcardBeforeMicrosoftCommonProps>
<ImportUserLocationsByWildcardAfterMicrosoftCommonProps Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCommonProps)' == ''">true</ImportUserLocationsByWildcardAfterMicrosoftCommonProps>
<ImportDirectoryBuildProps Condition="'$(ImportDirectoryBuildProps)' == ''">true</ImportDirectoryBuildProps>
</PropertyGroup>
<!--
Determine the path to the directory build props file if the user did not disable $(ImportDirectoryBuildProps) and
they did not already specify an absolute path to use via $(DirectoryBuildPropsPath)
-->
<PropertyGroup Condition="'$(ImportDirectoryBuildProps)' == 'true' and '$(DirectoryBuildPropsPath)' == ''">
<_DirectoryBuildPropsFile Condition="'$(_DirectoryBuildPropsFile)' == ''">Directory.Build.props</_DirectoryBuildPropsFile>
<_DirectoryBuildPropsBasePath Condition="'$(_DirectoryBuildPropsBasePath)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(MSBuildProjectDirectory), '$(_DirectoryBuildPropsFile)'))</_DirectoryBuildPropsBasePath>
<DirectoryBuildPropsPath Condition="'$(_DirectoryBuildPropsBasePath)' != '' and '$(_DirectoryBuildPropsFile)' != ''">$([System.IO.Path]::Combine('$(_DirectoryBuildPropsBasePath)', '$(_DirectoryBuildPropsFile)'))</DirectoryBuildPropsPath>
</PropertyGroup>
<Import Project="$(CustomBeforeDirectoryBuildProps)" Condition="'$(CustomBeforeDirectoryBuildProps)' != ''" />
<Import Project="$(DirectoryBuildPropsPath)" Condition="'$(ImportDirectoryBuildProps)' == 'true' and exists('$(DirectoryBuildPropsPath)')"/>
<Import Project="$(CustomAfterDirectoryBuildProps)" Condition="'$(CustomAfterDirectoryBuildProps)' != ''" />
<!--
Prepare to import project extensions which usually come from packages. Package management systems will create a file at:
$(MSBuildProjectExtensionsPath)\$(MSBuildProjectFile).<SomethingUnique>.props
Each package management system should use a unique moniker to avoid collisions. It is a wild-card import so the package
management system can write out multiple files but the order of the import is alphabetic because MSBuild sorts the list.
-->
<PropertyGroup>
<!--
The declaration of $(BaseIntermediateOutputPath) had to be moved up from Microsoft.Common.CurrentVersion.targets
in order for the $(MSBuildProjectExtensionsPath) to use it as a default.
-->
<BaseIntermediateOutputPath Condition="'$(BaseIntermediateOutputPath)'=='' ">obj\</BaseIntermediateOutputPath>
<BaseIntermediateOutputPath Condition="!HasTrailingSlash('$(BaseIntermediateOutputPath)')">$(BaseIntermediateOutputPath)\</BaseIntermediateOutputPath>
<_InitialBaseIntermediateOutputPath>$(BaseIntermediateOutputPath)</_InitialBaseIntermediateOutputPath>
<MSBuildProjectExtensionsPath Condition="'$(MSBuildProjectExtensionsPath)' == '' ">$(BaseIntermediateOutputPath)</MSBuildProjectExtensionsPath>
<!--
Import paths that are relative default to be relative to the importing file. However, since MSBuildExtensionsPath
defaults to BaseIntermediateOutputPath we expect it to be relative to the project directory. So if the path is relative
it needs to be made absolute based on the project directory.
-->
<MSBuildProjectExtensionsPath Condition="'$([System.IO.Path]::IsPathRooted($(MSBuildProjectExtensionsPath)))' == 'false'">$([System.IO.Path]::Combine('$(MSBuildProjectDirectory)', '$(MSBuildProjectExtensionsPath)'))</MSBuildProjectExtensionsPath>
<MSBuildProjectExtensionsPath Condition="!HasTrailingSlash('$(MSBuildProjectExtensionsPath)')">$(MSBuildProjectExtensionsPath)\</MSBuildProjectExtensionsPath>
<!--
Don't import project extensions during restore because NuGet restore generates them. Importing them during restore will embed
the pre-restore files in the binary log and then NuGet won't be able to embed the generated one after restore. If some other
project extension mechanism wants to import project extensions during restore, they need to explicitly set ImportProjectExtensionProps
-->
<ImportProjectExtensionProps Condition="$([MSBuild]::AreFeaturesEnabled('17.10')) And '$(ImportProjectExtensionProps)' == '' And '$(MSBuildIsRestoring)' == 'true'">false</ImportProjectExtensionProps>
<ImportProjectExtensionProps Condition="'$(ImportProjectExtensionProps)' == ''">true</ImportProjectExtensionProps>
<_InitialMSBuildProjectExtensionsPath Condition=" '$(ImportProjectExtensionProps)' == 'true' ">$(MSBuildProjectExtensionsPath)</_InitialMSBuildProjectExtensionsPath>
</PropertyGroup>
<Import Project="$(MSBuildProjectExtensionsPath)$(MSBuildProjectFile).*.props" Condition="'$(ImportProjectExtensionProps)' == 'true' and exists('$(MSBuildProjectExtensionsPath)')" />
<!--
Wildcard imports come from $(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ directory.
This is very similar to the same extension point used in Microsoft.Common.targets, which is located in
the $(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.targets\ directory.
Unfortunately, there is already a file named "Microsoft.Common.props" in this directory,
so we have to have a slightly different directory name to hold extensions.
-->
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCommonProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportBefore')"/>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportBefore\*" Condition="'$(ImportByWildcardBeforeMicrosoftCommonProps)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportBefore')"/>
<PropertyGroup>
<CustomBeforeMicrosoftCommonProps Condition="'$(CustomBeforeMicrosoftCommonProps)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.Before.$(MSBuildThisFile)</CustomBeforeMicrosoftCommonProps>
<CustomAfterMicrosoftCommonProps Condition="'$(CustomAfterMicrosoftCommonProps)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.After.$(MSBuildThisFile)</CustomAfterMicrosoftCommonProps>
</PropertyGroup>
<Import Project="$(CustomBeforeMicrosoftCommonProps)" Condition="'$(CustomBeforeMicrosoftCommonProps)' != '' and Exists('$(CustomBeforeMicrosoftCommonProps)')" />
<!-- This is used to determine whether Microsoft.Common.targets needs to import
Microsoft.Common.props itself, or whether it has been imported previously,
e.g. by the project itself. -->
<PropertyGroup>
<MicrosoftCommonPropsHasBeenImported>true</MicrosoftCommonPropsHasBeenImported>
</PropertyGroup>
<PropertyGroup>
<Configuration Condition=" '$(Configuration)' == '' and '$(DefaultProjectConfiguration)' != '' ">$(DefaultProjectConfiguration)</Configuration>
<Platform Condition=" '$(Platform)' == '' and '$(DefaultProjectPlatform)' != '' ">$(DefaultProjectPlatform)</Platform>
</PropertyGroup>
<PropertyGroup>
<WMSJSProject Condition="'$(WMSJSProject)' == ''">WJProject</WMSJSProject>
<WMSJSProjectDirectory Condition="'$(WMSJSProjectDirectory)' == ''">JavaScript</WMSJSProjectDirectory>
</PropertyGroup>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.VisualStudioVersion.v*.Common.props" Condition="'$(VisualStudioVersion)' == ''" />
<Import Project="$(CustomAfterMicrosoftCommonProps)" Condition="'$(CustomAfterMicrosoftCommonProps)' != '' and Exists('$(CustomAfterMicrosoftCommonProps)')" />
<Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCommonProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportAfter')"/>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportAfter\*" Condition="'$(ImportByWildcardAfterMicrosoftCommonProps)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Imports\Microsoft.Common.props\ImportAfter')"/>
<!--
Import NuGet.props file.
-->
<PropertyGroup>
<MSBuildUseVisualStudioDirectoryLayout Condition="'$(MSBuildUseVisualStudioDirectoryLayout)'==''">$([MSBuild]::IsRunningFromVisualStudio())</MSBuildUseVisualStudioDirectoryLayout>
<NuGetPropsFile Condition="'$(NuGetPropsFile)'=='' and '$(MSBuildUseVisualStudioDirectoryLayout)'=='true'">$([MSBuild]::GetToolsDirectory32())\..\..\..\Common7\IDE\CommonExtensions\Microsoft\NuGet\NuGet.props</NuGetPropsFile>
<NuGetPropsFile Condition="'$(NuGetPropsFile)'==''">$(MSBuildToolsPath)\NuGet.props</NuGetPropsFile>
</PropertyGroup>
<Import Condition="Exists('$(NuGetPropsFile)')" Project="$(NuGetPropsFile)" />
<PropertyGroup Condition=" '$(MSBuildLogVerboseTaskParameters)' != 'true' ">
<DisableLogTaskParameter_ConvertToAbsolutePath_Path>true</DisableLogTaskParameter_ConvertToAbsolutePath_Path>
<DisableLogTaskParameter_FindUnderPath_OutOfPath>true</DisableLogTaskParameter_FindUnderPath_OutOfPath>
<DisableLogTaskParameter_RemoveDuplicates_Inputs>true</DisableLogTaskParameter_RemoveDuplicates_Inputs>
<DisableLogTaskParameterItemMetadata_ConvertToAbsolutePath_AbsolutePaths>true</DisableLogTaskParameterItemMetadata_ConvertToAbsolutePath_AbsolutePaths>
<DisableLogTaskParameterItemMetadata_Copy_CopiedFiles>true</DisableLogTaskParameterItemMetadata_Copy_CopiedFiles>
<DisableLogTaskParameterItemMetadata_Copy_DestinationFiles>true</DisableLogTaskParameterItemMetadata_Copy_DestinationFiles>
<DisableLogTaskParameterItemMetadata_Copy_SourceFiles>true</DisableLogTaskParameterItemMetadata_Copy_SourceFiles>
<DisableLogTaskParameterItemMetadata_FindUnderPath_Files>true</DisableLogTaskParameterItemMetadata_FindUnderPath_Files>
<DisableLogTaskParameterItemMetadata_FindUnderPath_InPath>true</DisableLogTaskParameterItemMetadata_FindUnderPath_InPath>
<DisableLogTaskParameterItemMetadata_GenerateResource_FilesWritten>true</DisableLogTaskParameterItemMetadata_GenerateResource_FilesWritten>
<DisableLogTaskParameterItemMetadata_Hash_ItemsToHash>true</DisableLogTaskParameterItemMetadata_Hash_ItemsToHash>
<DisableLogTaskParameterItemMetadata_RemoveDuplicates_Filtered>true</DisableLogTaskParameterItemMetadata_RemoveDuplicates_Filtered>
<DisableLogTaskParameterItemMetadata_WriteLinesToFile_Lines>true</DisableLogTaskParameterItemMetadata_WriteLinesToFile_Lines>
</PropertyGroup>
</Project>
|