<!-- *********************************************************************************************** Microsoft.CSharp.CurrentVersion.targets WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have created a backup copy. Incorrect changes to this file will make it impossible to load or build your projects from the command-line or the IDE. This file defines the steps in the standard build process specific for C# .NET projects. For example, it contains the step that actually calls the C# compiler. The remainder of the build process is defined in Microsoft.Common.targets, which is imported by this file. Copyright (C) Microsoft Corporation. All rights reserved. *********************************************************************************************** --> <Project> <PropertyGroup> <ImportByWildcardBeforeMicrosoftCSharpTargets Condition="'$(ImportByWildcardBeforeMicrosoftCSharpTargets)' == ''">true</ImportByWildcardBeforeMicrosoftCSharpTargets> <ImportByWildcardAfterMicrosoftCSharpTargets Condition="'$(ImportByWildcardAfterMicrosoftCSharpTargets)' == ''">true</ImportByWildcardAfterMicrosoftCSharpTargets> <ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets)' == ''">true</ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets> <ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets)' == ''">true</ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets> </PropertyGroup> <Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBeforeMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportBefore')"/> <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportBefore\*" Condition="'$(ImportByWildcardBeforeMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportBefore')"/> <PropertyGroup> <CustomBeforeMicrosoftCSharpTargets Condition="'$(CustomBeforeMicrosoftCSharpTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.Before.Microsoft.CSharp.targets</CustomBeforeMicrosoftCSharpTargets> <CustomAfterMicrosoftCSharpTargets Condition="'$(CustomAfterMicrosoftCSharpTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.After.Microsoft.CSharp.targets</CustomAfterMicrosoftCSharpTargets> </PropertyGroup> <Import Project="$(CustomBeforeMicrosoftCSharpTargets)" Condition="'$(CustomBeforeMicrosoftCSharpTargets)' != '' and Exists('$(CustomBeforeMicrosoftCSharpTargets)')" /> <PropertyGroup> <DefaultLanguageSourceExtension>.cs</DefaultLanguageSourceExtension> <Language>C#</Language> <TargetRuntime>Managed</TargetRuntime> <AlwaysUseNumericalSuffixInItemNames>true</AlwaysUseNumericalSuffixInItemNames> <DefineCommonItemSchemas Condition=" '$(DefineCommonItemSchemas)' == '' ">true</DefineCommonItemSchemas> <DefineCommonReferenceSchemas Condition=" '$(DefineCommonReferenceSchemas)' == '' ">true</DefineCommonReferenceSchemas> <DefineCommonCapabilities Condition=" '$(DefineCommonCapabilities)' == '' ">true</DefineCommonCapabilities> <SynthesizeLinkMetadata Condition=" '$(SynthesizeLinkMetadata)' == '' and '$(HasSharedItems)' == 'true' ">true</SynthesizeLinkMetadata> <DefaultProjectTypeGuid Condition=" '$(DefaultProjectTypeGuid)' == '' ">{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</DefaultProjectTypeGuid> <AppDesignerFolder Condition="'$(AppDesignerFolder)' == ''">Properties</AppDesignerFolder> </PropertyGroup> <ItemGroup Condition=" '$(DefineCSharpItemSchemas)' != 'false' "> <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)CSharp.ProjectItemsSchema.xaml;"/> <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)CSharp.xaml;"> <Context>File</Context> </PropertyPageSchema> <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)CSharp.BrowseObject.xaml;"> <Context>BrowseObject</Context> </PropertyPageSchema> <ProjectCapability Include="CSharp;Managed"/> </ItemGroup> <ItemGroup Condition=" '$(DefineCommonCapabilities)' == 'true' "> <ProjectCapability Include="ReferencesFolder;LanguageService" /> </ItemGroup> <!-- The CreateManifestResourceNames target create the manifest resource names from the .RESX files. [IN] @(EmbeddedResource) - The list of EmbeddedResource items that have been pre-processed to add metadata about resource type Expected Metadata "Type" can either be "Resx" or "Non-Resx" [OUT] @(EmbeddedResource) - EmbeddedResource items with metadata For C# applications the transformation is like: Resources1.resx => RootNamespace.Resources1 => Build into main assembly SubFolder\Resources1.resx => RootNamespace.SubFolder.Resources1 => Build into main assembly Resources1.fr.resx => RootNamespace.Resources1.fr => Build into satellite assembly Resources1.notaculture.resx => RootNamespace.Resources1.notaculture => Build into main assembly For other project systems, this transformation may be different. --> <PropertyGroup> <CreateManifestResourceNamesDependsOn></CreateManifestResourceNamesDependsOn> </PropertyGroup> <Target Name="CreateManifestResourceNames" Condition="'@(EmbeddedResource)' != ''" DependsOnTargets="$(CreateManifestResourceNamesDependsOn)" > <ItemGroup> <_Temporary Remove="@(_Temporary)" /> </ItemGroup> <!-- Create manifest names for culture and non-culture Resx files, and for non-culture Non-Resx resources --> <CreateCSharpManifestResourceName ResourceFiles="@(EmbeddedResource)" RootNamespace="$(RootNamespace)" UseDependentUponConvention="$(EmbeddedResourceUseDependentUponConvention)" Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and ('%(EmbeddedResource.WithCulture)' == 'false' or '%(EmbeddedResource.Type)' == 'Resx')"> <Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" /> </CreateCSharpManifestResourceName> <!-- Create manifest names for all culture non-resx resources --> <CreateCSharpManifestResourceName ResourceFiles="@(EmbeddedResource)" RootNamespace="$(RootNamespace)" PrependCultureAsDirectory="false" UseDependentUponConvention="$(EmbeddedResourceUseDependentUponConvention)" Condition="'%(EmbeddedResource.ManifestResourceName)' == '' and '%(EmbeddedResource.WithCulture)' == 'true' and '%(EmbeddedResource.Type)' == 'Non-Resx'"> <Output TaskParameter="ResourceFilesWithManifestResourceNames" ItemName="_Temporary" /> </CreateCSharpManifestResourceName> <ItemGroup> <EmbeddedResource Remove="@(EmbeddedResource)" Condition="'%(EmbeddedResource.ManifestResourceName)' == ''"/> <EmbeddedResource Include="@(_Temporary)" /> <_Temporary Remove="@(_Temporary)" /> </ItemGroup> </Target> <Target Name="ResolveCodeAnalysisRuleSet" Condition="'$(CodeAnalysisRuleSet)' != ''" > <ResolveCodeAnalysisRuleSet CodeAnalysisRuleSet="$(CodeAnalysisRuleSet)" CodeAnalysisRuleSetDirectories="$(CodeAnalysisRuleSetDirectories)" MSBuildProjectDirectory="$(MSBuildProjectDirectory)"> <Output TaskParameter="ResolvedCodeAnalysisRuleSet" PropertyName="ResolvedCodeAnalysisRuleSet" /> </ResolveCodeAnalysisRuleSet> </Target> <ItemGroup> <!-- Activate CPS projects to track folder names in namespace. --> <ProjectCapability Include="RelativePathDerivedDefaultNamespace"/> </ItemGroup> <PropertyGroup> <!-- Provide a facility to override UseHostCompilerIfAvailable--> <UseHostCompilerIfAvailable Condition=" '$(UseHostCompilerIfAvailable)' == ''">true</UseHostCompilerIfAvailable> </PropertyGroup> <ItemGroup> <DocFileItem Include="$(DocumentationFile)" Condition="'$(DocumentationFile)'!=''"/> </ItemGroup> <ItemGroup Condition="'$(_DebugSymbolsProduced)' == 'true' and '$(PdbFile)' != ''"> <_DebugSymbolsIntermediatePathTemporary Include="$(PdbFile)"/> <!-- Add any missing .pdb extension, as the compiler does --> <_DebugSymbolsIntermediatePath Include="@(_DebugSymbolsIntermediatePathTemporary->'%(RootDir)%(Directory)%(Filename).pdb')"/> </ItemGroup> <PropertyGroup> <CoreCompileDependsOn>$(CoreCompileDependsOn);_ComputeNonExistentFileProperty;ResolveCodeAnalysisRuleSet</CoreCompileDependsOn> <ExportWinMDFile Condition="'$(ExportWinMDFile)' == '' and '$(OutputType)' == 'WinMDObj'">true</ExportWinMDFile> </PropertyGroup> <!-- The XamlPreCompile target must remain identical to the CoreCompile target in Microsoft.CSharp.Core.targets. Any updates to one must be made to the other. --> <Target Name="XamlPreCompile" Inputs="$(MSBuildAllProjects); @(Compile); @(_CoreCompileResourceInputs); $(ApplicationIcon); $(AssemblyOriginatorKeyFile); @(ReferencePath); @(CompiledLicenseFile); @(LinkResource); @(EmbeddedDocumentation); $(Win32Resource); $(Win32Manifest); @(CustomAdditionalCompileInputs); @(Page); @(ApplicationDefinition); $(ResolvedCodeAnalysisRuleSet)" Outputs="@(DocFileItem); @(XamlIntermediateAssembly); @(_DebugSymbolsIntermediatePath); $(NonExistentFile); @(CustomAdditionalCompileOutputs)" Condition="'@(Page)' != '' Or '@(ApplicationDefinition)' != ''" Returns="" DependsOnTargets="$(CoreCompileDependsOn);GenerateMSBuildEditorConfigFile" > <!-- These two compiler warnings are raised when a reference is bound to a different version than specified in the assembly reference version number. MSBuild raises the same warning in this case, so the compiler warning would be redundant. --> <PropertyGroup Condition="('$(TargetFrameworkVersion)' != 'v1.0') and ('$(TargetFrameworkVersion)' != 'v1.1')"> <NoWarn>$(NoWarn);1701;1702</NoWarn> </PropertyGroup> <PropertyGroup> <!-- To match historical behavior, when inside VS11+ disable the warning from csc.exe indicating that no sources were passed in--> <NoWarn Condition=" '$(BuildingInsideVisualStudio)' == 'true' and '$(VisualStudioVersion)' != '' and '$(VisualStudioVersion)' > '10.0' ">$(NoWarn);2008</NoWarn> </PropertyGroup> <ItemGroup Condition="'$(TargetingClr2Framework)'=='true'"> <ReferencePath> <EmbedInteropTypes/> </ReferencePath> </ItemGroup> <PropertyGroup> <!-- If the user has specified AppConfigForCompiler, we'll use it. If they have not, but they set UseAppConfigForCompiler, then we'll use AppConfig --> <AppConfigForCompiler Condition="'$(AppConfigForCompiler)' == '' and '$(UseAppConfigForCompiler)' == 'true'">$(AppConfig)</AppConfigForCompiler> <!-- If we are targeting winmdobj we want to specifically the pdbFile property since we do not want it to collide with the output of winmdexp--> <PdbFile Condition="'$(PdbFile)' == '' and '$(OutputType)' == 'winmdobj' and '$(_DebugSymbolsProduced)' == 'true'">$(IntermediateOutputPath)$(TargetName).compile.pdb</PdbFile> </PropertyGroup> <!-- Prefer32Bit was introduced in .NET 4.5. Set it to false if we are targeting 4.0 --> <PropertyGroup Condition="('$(TargetFrameworkVersion)' == 'v4.0')"> <Prefer32Bit>false</Prefer32Bit> </PropertyGroup> <ItemGroup Condition="('$(AdditionalFileItemNames)' != '')"> <AdditionalFileItems Include="$(AdditionalFileItemNames)" /> <AdditionalFiles Include="@(%(AdditionalFileItems.Identity))" /> </ItemGroup> <PropertyGroup Condition="'$(UseSharedCompilation)' == ''"> <UseSharedCompilation>true</UseSharedCompilation> </PropertyGroup> <!-- Condition is to filter out the _CoreCompileResourceInputs so that it doesn't pass in culture resources to the compiler --> <!-- Don't run analyzers for Csc task on XamlPrecompile pass, we only want to run them on core compile. --> <Csc Condition=" '%(_CoreCompileResourceInputs.WithCulture)' != 'true' " AdditionalLibPaths="$(AdditionalLibPaths)" AddModules="@(AddModules)" AdditionalFiles="@(AdditionalFiles)" AllowUnsafeBlocks="$(AllowUnsafeBlocks)" AnalyzerConfigFiles="@(EditorConfigFiles)" Analyzers="@(Analyzer)" ApplicationConfiguration="$(AppConfigForCompiler)" BaseAddress="$(BaseAddress)" CheckForOverflowUnderflow="$(CheckForOverflowUnderflow)" CodeAnalysisRuleSet="$(ResolvedCodeAnalysisRuleSet)" CodePage="$(CodePage)" DebugType="$(DebugType)" DefineConstants="$(DefineConstants)" DelaySign="$(DelaySign)" DisabledWarnings="$(NoWarn)" DocumentationFile="@(DocFileItem)" EmitDebugInformation="$(DebugSymbols)" EnvironmentVariables="$(CscEnvironment)" ErrorEndLocation="$(ErrorEndLocation)" ErrorLog="$(ErrorLog)" ErrorReport="$(ErrorReport)" FileAlignment="$(FileAlignment)" GenerateFullPaths="$(GenerateFullPaths)" HighEntropyVA="$(HighEntropyVA)" KeyContainer="$(KeyContainerName)" KeyFile="$(KeyOriginatorFile)" LangVersion="$(LangVersion)" LinkResources="@(LinkResource)" MainEntryPoint="$(StartupObject)" ModuleAssemblyName="$(ModuleAssemblyName)" NoConfig="true" NoLogo="$(NoLogo)" NoStandardLib="$(NoCompilerStandardLib)" NoWin32Manifest="$(NoWin32Manifest)" Nullable="$(Nullable)" Optimize="$(Optimize)" OutputAssembly="@(XamlIntermediateAssembly)" PdbFile="$(PdbFile)" Platform="$(PlatformTarget)" Prefer32Bit="$(Prefer32Bit)" PreferredUILang="$(PreferredUILang)" References="@(ReferencePath)" ReportAnalyzer="$(ReportAnalyzer)" Resources="@(_CoreCompileResourceInputs);@(CompiledLicenseFile)" ResponseFiles="$(CompilerResponseFile)" SkipAnalyzers="true" Sources="@(Compile)" SubsystemVersion="$(SubsystemVersion)" TargetType="$(OutputType)" ToolExe="$(CscToolExe)" ToolPath="$(CscToolPath)" TreatWarningsAsErrors="$(TreatWarningsAsErrors)" UseHostCompilerIfAvailable="$(UseHostCompilerIfAvailable)" UseSharedCompilation="$(UseSharedCompilation)" Utf8Output="$(Utf8Output)" VsSessionGuid="$(VsSessionGuid)" WarningLevel="$(WarningLevel)" WarningsAsErrors="$(WarningsAsErrors)" WarningsNotAsErrors="$(WarningsNotAsErrors)" Win32Icon="$(ApplicationIcon)" Win32Manifest="$(Win32Manifest)" Win32Resource="$(Win32Resource)" /> <!-- Only Applicable to the regular CoreCompile: <ItemGroup> <_CoreCompileResourceInputs Remove="@(_CoreCompileResourceInputs)" /> </ItemGroup> <CallTarget Targets="$(TargetsTriggeredByCompilation)" Condition="'$(TargetsTriggeredByCompilation)' != ''"/> --> <OnError Condition="'$(OnXamlPreCompileErrorTarget)' != ''" ExecuteTargets="$(OnXamlPreCompileErrorTarget)" /> </Target> <PropertyGroup> <!-- Design-time builds require a newer version than 1.0 to succeed, so override back to inbox in that case --> <CSharpCoreTargetsPath Condition="'$(CSharpCoreTargetsPath)' == '' or ('$(DesignTimeBuild)' == 'true' and $(CSharpCoreTargetsPath.Contains('Microsoft.Net.Compilers.1.0.0')))">$(RoslynTargetsPath)\Microsoft.CSharp.Core.targets</CSharpCoreTargetsPath> </PropertyGroup> <Import Project="$(CSharpCoreTargetsPath)" /> <!-- Import design time targets for Roslyn Project System. These are only available if Visual Studio is installed. --> <!-- Import design time targets before the common targets, which import targets from Nuget. --> <PropertyGroup> <CSharpDesignTimeTargetsPath Condition="'$(CSharpDesignTimeTargetsPath)'==''">$(MSBuildExtensionsPath)\Microsoft\VisualStudio\Managed\Microsoft.CSharp.DesignTime.targets</CSharpDesignTimeTargetsPath> </PropertyGroup> <Import Project="$(CSharpDesignTimeTargetsPath)" Condition="'$(CSharpDesignTimeTargetsPath)' != '' and Exists('$(CSharpDesignTimeTargetsPath)')" /> <Import Project="Microsoft.Common.targets" /> <Import Project="$(MSBuildToolsPath)\Microsoft.ServiceModel.targets" Condition="('$(TargetFrameworkVersion)' != 'v2.0' and '$(TargetFrameworkVersion)' != 'v3.0' and '$(TargetFrameworkVersion)' != 'v3.5') and Exists('$(MSBuildToolsPath)\Microsoft.ServiceModel.targets')"/> <Target Name="_SetTargetFrameworkMonikerAttribute" BeforeTargets="GenerateTargetFrameworkMonikerAttribute"> <PropertyGroup> <TargetFrameworkMonikerAssemblyAttributeText Condition="'$(TargetFrameworkMoniker)' != '' and '$(TargetingClr2Framework)' != 'true'"> // <autogenerated /> using System%3b using System.Reflection%3b [assembly: global::System.Runtime.Versioning.TargetFrameworkAttribute("$(TargetFrameworkMoniker)", FrameworkDisplayName = "$(TargetFrameworkMonikerDisplayName)")] </TargetFrameworkMonikerAssemblyAttributeText> </PropertyGroup> </Target> <PropertyGroup> <Utf8Output Condition="'$(Utf8Output)' == ''">true</Utf8Output> <!-- NoCompilerStandardLib maps to the compiler's /nostdlib option. By default we always want that switch to be passed to the compiler so that either we or the user provides the references NoStdLib on the other hand indicates that the user doesn't want standard references so only if NoStdLib isn't set to true, will we provide the standard references --> <NoCompilerStandardLib Condition=" '$(NoCompilerStandardLib)' == '' ">true</NoCompilerStandardLib> <ErrorEndLocation Condition="'$(BuildingInsideVisualStudio)' == 'true' and '$(ErrorEndLocation)' == ''">true</ErrorEndLocation> <!-- When building inside VS, by default use the same language for compiler messages as VS itself does. --> <PreferredUILang Condition="'$(BuildingInsideVisualStudio)' == 'true' and '$(PreferredUILang)' == ''">$([System.Globalization.CultureInfo]::CurrentUICulture.Name)</PreferredUILang> </PropertyGroup> <!-- Add any "automatic" compiler references that need to be resolved when NoCompilerStandardLib is set but the user hasn't told us to not include standard references --> <ItemGroup Condition=" '$(NoCompilerStandardLib)' == 'true' and '$(NoStdLib)' != 'true' "> <!-- Note that unlike VB, C# does not automatically locate System.dll as a "standard library" instead the reference is always passed from the project. Also, for mscorlib.dll we need to provide the explicit location in order to avoid resolving from, e.g., {CandidateAssemblyFiles}. --> <_ExplicitReference Include="$(FrameworkPathOverride)\mscorlib.dll" /> </ItemGroup> <Import Project="$(CustomAfterMicrosoftCSharpTargets)" Condition="'$(CustomAfterMicrosoftCSharpTargets)' != '' and Exists('$(CustomAfterMicrosoftCSharpTargets)')" /> <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportAfter\*" Condition="'$(ImportByWildcardAfterMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportAfter')"/> <Import Project="$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfterMicrosoftCSharpTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.CSharp.targets\ImportAfter')"/> </Project> |