|
<!--
***********************************************************************************************
NuGet.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (c) .NET Foundation. All rights reserved.
***********************************************************************************************
This target file contains the NuGet Restore target for walking the project and reference graph
and restoring dependencies from the graph.
Ways to use this targets file:
1. Invoke it directly and provide project file paths using $(RestoreGraphProjectInput).
2. With a solution this may be used as a target in the metaproj.
3. Import the targets file from a project.
Restore flow summary:
1. Top level projects (entry points) are determined.
2. Each project and all of its project references are walked recursively.
3. The project is evaluated for each $(TargetFramework). Items are created
for project properties and dependencies. Each item is marked
with the project it came from so that it can be matched up later.
4. All restore items generated by the walk are grouped together by
project and convert into a project spec.
The result file contains:
1. A list of projects to restore.
2. The complete closure of all projects referenced (Includes project references that are not being restored directly).
3. Package and project dependencies for each project.
4. DotnetCliTool references
-->
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<!-- Mark that this target file has been loaded. -->
<IsRestoreTargetsFileLoaded>true</IsRestoreTargetsFileLoaded>
<!-- Load NuGet.Build.Tasks.dll, this can be overridden to use a different version with $(RestoreTaskAssemblyFile) -->
<RestoreTaskAssemblyFile Condition=" '$(RestoreTaskAssemblyFile)' == '' ">NuGet.Build.Tasks.dll</RestoreTaskAssemblyFile>
<!-- Do not hide errors and warnings by default -->
<HideWarningsAndErrors Condition=" '$(HideWarningsAndErrors)' == '' ">false</HideWarningsAndErrors>
<!-- Recurse by default -->
<RestoreRecursive Condition=" '$(RestoreRecursive)' == '' ">true</RestoreRecursive>
<RestoreUseSkipNonexistentTargets Condition=" '$(RestoreUseSkipNonexistentTargets)' == '' ">true</RestoreUseSkipNonexistentTargets>
<!-- RuntimeIdentifier compatibility check -->
<ValidateRuntimeIdentifierCompatibility Condition=" '$(ValidateRuntimeIdentifierCompatibility)' == '' ">false</ValidateRuntimeIdentifierCompatibility>
<!-- Error handling while walking projects -->
<RestoreContinueOnError Condition=" '$(RestoreContinueOnError)' == '' ">WarnAndContinue</RestoreContinueOnError>
<!-- Build in parallel -->
<RestoreBuildInParallel Condition=" '$(BuildInParallel)' != '' ">$(BuildInParallel)</RestoreBuildInParallel>
<RestoreBuildInParallel Condition=" '$(RestoreBuildInParallel)' == '' ">true</RestoreBuildInParallel>
<!-- Check if the restore target was executed on a sln file -->
<_RestoreSolutionFileUsed Condition=" '$(_RestoreSolutionFileUsed)' == '' AND '$(SolutionDir)' != '' AND $(MSBuildProjectFullPath.EndsWith('.metaproj')) == 'true' ">true</_RestoreSolutionFileUsed>
<!-- We default to MSBuildInteractive. -->
<NuGetInteractive Condition=" '$(NuGetInteractive)' == '' ">$(MSBuildInteractive)</NuGetInteractive>
<!-- Mark that this targets file supports package download. -->
<PackageDownloadSupported>true</PackageDownloadSupported>
<!-- Mark that this targets file GetReferenceNearestTargetFrameworkTask task supports the TargetPlatformMoniker -->
<GetReferenceNearestTargetFrameworkTaskSupportsTargetPlatformParameter>true</GetReferenceNearestTargetFrameworkTaskSupportsTargetPlatformParameter>
<!-- Flag if the Central package file is enabled -->
<_CentralPackageVersionsEnabled Condition="'$(ManagePackageVersionsCentrally)' == 'true' AND '$(CentralPackageVersionsFileImported)' == 'true'">true</_CentralPackageVersionsEnabled>
</PropertyGroup>
<!--
Visual Studio's project property page requires defaults to be set to inform customers what the default values are.
Project-system uses DefaultValueSourceLocation.AfterContext to detect when a customer's project changes the value, so these defaults must be set here in the targets file.
-->
<PropertyGroup>
<!-- Enable NuGetAudit by default -->
<NuGetAudit Condition=" '$(NuGetAudit)' == '' ">true</NuGetAudit>
<!-- Report all severity vulnerabilities (low severity and higher). Allowed values are: low, moderate, high, critical -->
<NuGetAuditLevel Condition=" '$(NuGetAuditLevel)' == '' ">low</NuGetAuditLevel>
<!-- Report known vulnerabilities on direct and transitive dependencies, unless SdkAnalysisLevel (or equalivant) is lower than 9.0.100. Allowed values are: direct, all -->
<NuGetAuditMode Condition=" '$(NuGetAuditMode)' == '' ">direct</NuGetAuditMode>
</PropertyGroup>
<PropertyGroup>
<!-- Exclude packages from changing restore inputs. -->
<_GenerateRestoreGraphProjectEntryInputProperties>ExcludeRestorePackageImports=true</_GenerateRestoreGraphProjectEntryInputProperties>
<!-- Standalone mode
This is used by NuGet.exe to inject targets into the project that will be
walked next. In normal /t:Restore mode this causes a duplicate import
since NuGet.targets it loaded as part of MSBuild, there is should be
skipped. -->
<_GenerateRestoreGraphProjectEntryInputProperties Condition=" '$(RestoreUseCustomAfterTargets)' == 'true' ">
$(_GenerateRestoreGraphProjectEntryInputProperties);
NuGetRestoreTargets=$(MSBuildThisFileFullPath);
RestoreUseCustomAfterTargets=$(RestoreUseCustomAfterTargets);
CustomAfterMicrosoftCommonCrossTargetingTargets=$(MSBuildThisFileFullPath);
CustomAfterMicrosoftCommonTargets=$(MSBuildThisFileFullPath);
</_GenerateRestoreGraphProjectEntryInputProperties>
<!-- Include SolutionDir and SolutionName for solution restores and persist these properties during the walk. -->
<_GenerateRestoreGraphProjectEntryInputProperties Condition=" '$(_RestoreSolutionFileUsed)' == 'true' ">
$(_GenerateRestoreGraphProjectEntryInputProperties);
_RestoreSolutionFileUsed=true;
SolutionDir=$(SolutionDir);
SolutionName=$(SolutionName);
SolutionFileName=$(SolutionFileName);
SolutionPath=$(SolutionPath);
SolutionExt=$(SolutionExt);
</_GenerateRestoreGraphProjectEntryInputProperties>
</PropertyGroup>
<ItemGroup Condition="'$(ManagePackageVersionsCentrally)' == 'true' And '$(RestoreEnableGlobalPackageReference)' != 'false'">
<!--
Add GlobalPackageReference items to the PackageReference item group with no version.
Global package references only include the same assets as a development dependency (runtime; build; native; contentfiles; analyzers)
because those kind of packages are the best candidate for a global package reference. They are generally packages that
extend the build.
Global package references have all assets private because central package references are generally packages that provide
versioning, signing, etc and should not flow to downstream dependencies. Also, central package references are already
referenced by every project in the tree so they don't need to be transitive.
-->
<PackageReference Include="@(GlobalPackageReference)"
Version=""
IncludeAssets="Runtime;Build;Native;contentFiles;Analyzers"
PrivateAssets="All" />
<!--
Add GlobalPackageReference items to the PackageVersion item group with the version.
-->
<PackageVersion Include="@(GlobalPackageReference)"
Version="%(Version)" />
</ItemGroup>
<!-- Tasks -->
<UsingTask TaskName="NuGet.Build.Tasks.RestoreTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.WriteRestoreGraphTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreProjectJsonPathTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreProjectReferencesTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestorePackageReferencesTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetCentralPackageVersionsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestorePackageDownloadsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreFrameworkReferencesTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreNuGetAuditSuppressionsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreDotnetCliToolsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetProjectTargetFrameworksTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreSolutionProjectsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreSettingsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.WarnForInvalidProjectsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetReferenceNearestTargetFrameworkTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetRestoreProjectStyleTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.NuGetMessageTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.CheckForDuplicateNuGetItemsTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<UsingTask TaskName="NuGet.Build.Tasks.GetGlobalPropertyValueTask" AssemblyFile="$(RestoreTaskAssemblyFile)" />
<!--
============================================================
Restore
Main entry point for restoring packages
============================================================
-->
<Target Name="Restore" DependsOnTargets="_GenerateRestoreGraph">
<!-- Drop any duplicate items -->
<RemoveDuplicates
Inputs="@(_RestoreGraphEntry)">
<Output
TaskParameter="Filtered"
ItemName="_RestoreGraphEntryFiltered" />
</RemoveDuplicates>
<!-- Call restore -->
<RestoreTask
RestoreGraphItems="@(_RestoreGraphEntryFiltered)"
RestoreDisableParallel="$(RestoreDisableParallel)"
RestoreNoCache="$(RestoreNoCache)"
RestoreNoHttpCache="$(RestoreNoHttpCache)"
RestoreIgnoreFailedSources="$(RestoreIgnoreFailedSources)"
RestoreRecursive="$(RestoreRecursive)"
RestoreForce="$(RestoreForce)"
HideWarningsAndErrors="$(HideWarningsAndErrors)"
Interactive="$(NuGetInteractive)"
RestoreForceEvaluate="$(RestoreForceEvaluate)"
RestorePackagesConfig="$(RestorePackagesConfig)"
EmbedFilesInBinlog="$(RestoreEmbedFilesInBinlog)">
<Output TaskParameter="EmbedInBinlog" ItemName="EmbedInBinlog" />
</RestoreTask>
</Target>
<!--
============================================================
GenerateRestoreGraphFile
Writes the output of _GenerateRestoreGraph to disk
============================================================
-->
<Target Name="GenerateRestoreGraphFile" DependsOnTargets="_GenerateRestoreGraph">
<!-- Validate -->
<Error Condition="$(RestoreGraphOutputPath) == ''" Text="Missing RestoreGraphOutputPath property!" />
<!-- Drop any duplicate items -->
<RemoveDuplicates
Inputs="@(_RestoreGraphEntry)">
<Output
TaskParameter="Filtered"
ItemName="_RestoreGraphEntryFiltered" />
</RemoveDuplicates>
<!-- Write file -->
<WriteRestoreGraphTask
RestoreGraphItems="@(_RestoreGraphEntryFiltered)"
RestoreGraphOutputPath="$(RestoreGraphOutputPath)"
RestoreRecursive="$(RestoreRecursive)" />
</Target>
<!--
============================================================
CollectPackageReferences
Gathers all PackageReference items from the project.
This target may be used as an extension point to modify
package references before NuGet reads them.
============================================================
-->
<Target Name="CollectPackageReferences" Returns="@(PackageReference)" >
<!-- NOTE for design-time builds we need to ensure that we continue on error. -->
<PropertyGroup>
<CollectPackageReferencesContinueOnError>$(ContinueOnError)</CollectPackageReferencesContinueOnError>
<CollectPackageReferencesContinueOnError Condition="'$(ContinueOnError)' == '' ">false</CollectPackageReferencesContinueOnError>
</PropertyGroup>
<CheckForDuplicateNuGetItemsTask
Condition="'$(DisableCheckingDuplicateNuGetItems)' != 'true' "
Items="@(PackageReference)"
ItemName="PackageReference"
LogCode="NU1504"
MSBuildProjectFullPath="$(MSBuildProjectFullPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
NoWarn="$(NoWarn)"
ContinueOnError="$(CollectPackageReferencesContinueOnError)"
>
<Output TaskParameter="DeduplicatedItems" ItemName="DeduplicatedPackageReferences" />
</CheckForDuplicateNuGetItemsTask>
<ItemGroup Condition="'@(DeduplicatedPackageReferences)' != ''">
<PackageReference Remove="@(PackageReference)" />
<PackageReference Include="@(DeduplicatedPackageReferences)" />
</ItemGroup>
</Target>
<!--
============================================================
CollectCentralPackageVersions
Gathers all PackageVersion items from the central package versions file.
============================================================
-->
<Target Name="CollectCentralPackageVersions" Returns="@(PackageVersion)">
<!-- NOTE for design-time builds we need to ensure that we continue on error. -->
<PropertyGroup>
<CollectCentralPackageVersionsContinueOnError>$(ContinueOnError)</CollectCentralPackageVersionsContinueOnError>
<CollectCentralPackageVersionsContinueOnError Condition="'$(ContinueOnError)' == '' ">false</CollectCentralPackageVersionsContinueOnError>
</PropertyGroup>
<CheckForDuplicateNuGetItemsTask
Condition="'$(DisableCheckingDuplicateNuGetItems)' != 'true' "
Items="@(PackageVersion)"
ItemName="PackageVersion"
LogCode="NU1506"
MSBuildProjectFullPath="$(MSBuildProjectFullPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
NoWarn="$(NoWarn)"
ContinueOnError="$(CollectCentralPackageVersionsContinueOnError)"
>
<Output TaskParameter="DeduplicatedItems" ItemName="DeduplicatedPackageVersions" />
</CheckForDuplicateNuGetItemsTask>
<ItemGroup Condition="'@(DeduplicatedPackageVersions)' != ''">
<PackageVersion Remove="@(PackageVersion)" />
<PackageVersion Include="@(DeduplicatedPackageVersions)" />
</ItemGroup>
</Target>
<!--
============================================================
CollectPackageDownloads
Gathers all PackageDownload items from the project.
This target may be used as an extension point to modify
package downloads before NuGet reads them.
============================================================
-->
<Target Name="CollectPackageDownloads" Returns="@(PackageDownload)">
<!-- NOTE for design-time builds we need to ensure that we continue on error. -->
<PropertyGroup>
<CollectPackageDownloadsContinueOnError>$(ContinueOnError)</CollectPackageDownloadsContinueOnError>
<CollectPackageDownloadsContinueOnError Condition="'$(ContinueOnError)' == '' ">false</CollectPackageDownloadsContinueOnError>
</PropertyGroup>
<CheckForDuplicateNuGetItemsTask
Condition="'$(DisableCheckingDuplicateNuGetItems)' != 'true' "
Items="@(PackageDownload)"
ItemName="PackageDownload"
LogCode="NU1505"
MSBuildProjectFullPath="$(MSBuildProjectFullPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
NoWarn="$(NoWarn)"
ContinueOnError="$(CollectPackageDownloadsContinueOnError)"
>
<Output TaskParameter="DeduplicatedItems" ItemName="DeduplicatedPackageDownloads" />
</CheckForDuplicateNuGetItemsTask>
<ItemGroup Condition="'@(DeduplicatedPackageDownloads)' != ''">
<PackageDownload Remove="@(PackageDownload)" />
<PackageDownload Include="@(DeduplicatedPackageDownloads)" />
</ItemGroup>
</Target>
<!--
============================================================
CollectFrameworkReferences
============================================================
-->
<Target Name="CollectFrameworkReferences" Returns="@(_FrameworkReferenceForRestore)">
<ItemGroup>
<_FrameworkReferenceForRestore
Include="@(FrameworkReference)"
Condition="'%(FrameworkReference.IsTransitiveFrameworkReference)' != 'true'"/>
</ItemGroup>
</Target>
<!--
============================================================
CollectNuGetAuditSuppressions
Gathers all NuGetAuditSuppress items from the project.
This target may be used as an extension point to modify
advisory suppressions before NuGet reads them.
============================================================
-->
<Target Name="CollectNuGetAuditSuppressions" Returns="@(NuGetAuditSuppress)">
<!-- NOTE for design-time builds we need to ensure that we continue on error. -->
<PropertyGroup>
<CollectNuGetAuditSuppressionsContinueOnError>$(ContinueOnError)</CollectNuGetAuditSuppressionsContinueOnError>
<CollectNuGetAuditSuppressionsContinueOnError Condition="'$(ContinueOnError)' == '' ">false</CollectNuGetAuditSuppressionsContinueOnError>
</PropertyGroup>
<CheckForDuplicateNuGetItemsTask
Items="@(NuGetAuditSuppress)"
ItemName="NuGetAuditSuppress"
LogCode="NU1508"
MSBuildProjectFullPath="$(MSBuildProjectFullPath)"
TreatWarningsAsErrors="$(TreatWarningsAsErrors)"
WarningsAsErrors="$(WarningsAsErrors)"
WarningsNotAsErrors="$(WarningsNotAsErrors)"
NoWarn="$(NoWarn)"
ContinueOnError="$(CollectNuGetAuditSuppressionsContinueOnError)"
>
<Output TaskParameter="DeduplicatedItems" ItemName="DeduplicatedNuGetAuditSuppressions" />
</CheckForDuplicateNuGetItemsTask>
<ItemGroup Condition="'@(DeduplicatedNuGetAuditSuppressions)' != ''">
<NuGetAuditSuppress Remove="@(NuGetAuditSuppress)" />
<NuGetAuditSuppress Include="@(DeduplicatedNuGetAuditSuppressions)" />
</ItemGroup>
</Target>
<!--
============================================================
_CollectRestoreInputs
Runs all the 'Collect' targets
============================================================
-->
<Target Name="_CollectRestoreInputs"
DependsOnTargets="CollectPackageReferences;CollectPackageDownloads;CollectFrameworkReferences;CollectCentralPackageVersions;CollectNuGetAuditSuppressions">
</Target>
<!--
============================================================
_LoadRestoreGraphEntryPoints
Find project entry points and load them into items.
============================================================
-->
<Target Name="_LoadRestoreGraphEntryPoints" Returns="@(RestoreGraphProjectInputItems)">
<!-- Allow overriding items with RestoreGraphProjectInput -->
<ItemGroup Condition=" @(RestoreGraphProjectInputItems) == '' ">
<RestoreGraphProjectInputItems Include="$(RestoreGraphProjectInput)" />
</ItemGroup>
<!-- Project case -->
<ItemGroup Condition=" $(MSBuildProjectFullPath.EndsWith('.metaproj')) != 'true' AND @(RestoreGraphProjectInputItems) == '' ">
<RestoreGraphProjectInputItems Include="$(MSBuildProjectFullPath)" />
</ItemGroup>
<!-- Solution case -->
<GetRestoreSolutionProjectsTask
Condition=" $(MSBuildProjectFullPath.EndsWith('.metaproj')) == 'true' AND @(RestoreGraphProjectInputItems) == '' "
ProjectReferences="@(ProjectReference)"
SolutionFilePath="$(MSBuildProjectFullPath)">
<Output
TaskParameter="OutputProjectReferences"
ItemName="RestoreGraphProjectInputItems" />
</GetRestoreSolutionProjectsTask>
</Target>
<!--
============================================================
_FilterRestoreGraphProjectInputItems
Filter out unsupported project entry points.
============================================================
-->
<Target Name="_FilterRestoreGraphProjectInputItems" DependsOnTargets="_LoadRestoreGraphEntryPoints"
Returns="@(FilteredRestoreGraphProjectInputItems)">
<PropertyGroup>
<RestoreProjectFilterMode Condition=" '$(RestoreProjectFilterMode)' == '' ">exclusionlist</RestoreProjectFilterMode>
</PropertyGroup>
<!-- Filter to a list of known supported types -->
<ItemGroup Condition=" '$(RestoreProjectFilterMode)' == 'inclusionlist' ">
<_FilteredRestoreGraphProjectInputItemsTmp
Include="@(RestoreGraphProjectInputItems)"
Condition=" '%(RestoreGraphProjectInputItems.Extension)' == '.csproj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.vbproj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.fsproj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.nuproj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.proj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.msbuildproj' Or
'%(RestoreGraphProjectInputItems.Extension)' == '.vcxproj' " />
</ItemGroup>
<!-- Filter out disallowed types -->
<ItemGroup Condition=" '$(RestoreProjectFilterMode)' == 'exclusionlist' ">
<_FilteredRestoreGraphProjectInputItemsTmp
Include="@(RestoreGraphProjectInputItems)"
Condition=" '%(RestoreGraphProjectInputItems.Extension)' != '.metaproj'
AND '%(RestoreGraphProjectInputItems.Extension)' != '.shproj'
AND '%(RestoreGraphProjectInputItems.Extension)' != '.vcxitems'
AND '%(RestoreGraphProjectInputItems.Extension)' != '.vdproj'
AND '%(RestoreGraphProjectInputItems.Extension)' != '' " />
</ItemGroup>
<!-- No filtering -->
<ItemGroup Condition=" '$(RestoreProjectFilterMode)' != 'exclusionlist' AND '$(RestoreProjectFilterMode)' != 'inclusionlist' ">
<_FilteredRestoreGraphProjectInputItemsTmp
Include="@(RestoreGraphProjectInputItems)" />
</ItemGroup>
<!-- Remove duplicates -->
<RemoveDuplicates
Inputs="@(_FilteredRestoreGraphProjectInputItemsTmp)">
<Output
TaskParameter="Filtered"
ItemName="FilteredRestoreGraphProjectInputItemsWithoutDuplicates" />
</RemoveDuplicates>
<!-- Remove projects that do not support restore. -->
<!-- With SkipNonexistentTargets support -->
<MSBuild Condition=" '$(RestoreUseSkipNonexistentTargets)' == 'true' "
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(FilteredRestoreGraphProjectInputItemsWithoutDuplicates)"
Targets="_IsProjectRestoreSupported"
SkipNonexistentTargets="true"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="FilteredRestoreGraphProjectInputItems" />
</MSBuild>
<!-- Without SkipNonexistentTargets support -->
<MSBuild Condition=" '$(RestoreUseSkipNonexistentTargets)' != 'true' "
Projects="@(FilteredRestoreGraphProjectInputItemsWithoutDuplicates)"
Targets="_IsProjectRestoreSupported"
ContinueOnError="$(RestoreContinueOnError)"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="FilteredRestoreGraphProjectInputItems" />
</MSBuild>
<!-- Warn for projects that do not support restore. -->
<WarnForInvalidProjectsTask
Condition=" '$(DisableWarnForInvalidRestoreProjects)' != 'true' AND '$(HideWarningsAndErrors)' != 'true' "
AllProjects="@(FilteredRestoreGraphProjectInputItemsWithoutDuplicates)"
ValidProjects="@(FilteredRestoreGraphProjectInputItems)" />
</Target>
<!--
============================================================
_GenerateRestoreGraph
Entry point for creating the project to project restore graph.
============================================================
-->
<Target Name="_GenerateRestoreGraph"
DependsOnTargets="_FilterRestoreGraphProjectInputItems;_GetAllRestoreProjectPathItems"
Returns="@(_RestoreGraphEntry)">
<Message Text="Generating dg file" Importance="low" />
<Message Text="%(_RestoreProjectPathItems.Identity)" Importance="low" />
<!-- Use all projects if RestoreRecursive is true. Otherwise use only the top level projects. -->
<ItemGroup>
<_GenerateRestoreGraphProjectEntryInput Include="@(FilteredRestoreGraphProjectInputItems)" Condition=" '$(RestoreRecursive)' != 'true' " />
<_GenerateRestoreGraphProjectEntryInput Include="@(_RestoreProjectPathItems)" Condition=" '$(RestoreRecursive)' == 'true' " />
</ItemGroup>
<!-- Add top level entries to the direct restore list. These projects will also restore tools. -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(_GenerateRestoreGraphProjectEntryInput)"
Targets="_GenerateRestoreGraphProjectEntry"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreGraphEntry" />
</MSBuild>
<!-- Generate a spec for every project including dependencies. -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(_RestoreProjectPathItems)"
Targets="_GenerateProjectRestoreGraph"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreGraphEntry" />
</MSBuild>
</Target>
<!--
============================================================
_GenerateRestoreGraphProjectEntry
Top level entry point within a project.
============================================================
-->
<Target Name="_GenerateRestoreGraphProjectEntry"
DependsOnTargets="_GenerateRestoreSpecs;_GenerateDotnetCliToolReferenceSpecs"
Returns="@(_RestoreGraphEntry)">
<!-- Returns restore graph entries for the project and all dependencies -->
</Target>
<!--
============================================================
_GenerateRestoreSpecs
Mark entry points for restore.
============================================================
-->
<Target Name="_GenerateRestoreSpecs"
DependsOnTargets="_GetRestoreProjectStyle"
Returns="@(_RestoreGraphEntry)">
<Message Text="Restore entry point $(MSBuildProjectFullPath)" Importance="low" />
<!-- Mark entry point -->
<ItemGroup Condition=" '$(RestoreProjects)' == '' OR '$(RestoreProjects)' == 'true' ">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())" Condition=" '$(RestoreProjectStyle)' != 'Unknown' ">
<Type>RestoreSpec</Type>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
</_RestoreGraphEntry>
</ItemGroup>
</Target>
<!--
============================================================
_GenerateDotnetCliToolReferenceSpecs
Collect DotnetCliToolReferences
============================================================
-->
<Target Name="_GenerateDotnetCliToolReferenceSpecs"
DependsOnTargets="_GetRestoreSettings"
Returns="@(_RestoreGraphEntry)">
<PropertyGroup>
<DotnetCliToolTargetFramework Condition=" '$(DotnetCliToolTargetFramework)' == '' ">netcoreapp1.0</DotnetCliToolTargetFramework>
</PropertyGroup>
<!-- Write out tool references -->
<GetRestoreDotnetCliToolsTask
Condition=" '$(RestoreDotnetCliToolReferences)' == '' OR '$(RestoreDotnetCliToolReferences)' == 'true' "
ProjectPath="$(MSBuildProjectFullPath)"
ToolFramework="$(DotnetCliToolTargetFramework)"
RestorePackagesPath="$(_OutputPackagesPath)"
RestoreFallbackFolders="$(_OutputFallbackFolders)"
RestoreSources="$(_OutputSources)"
RestoreConfigFilePaths="$(_OutputConfigFilePaths)"
DotnetCliToolReferences="@(DotnetCliToolReference)">
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestoreDotnetCliToolsTask>
</Target>
<!--
============================================================
_GetProjectJsonPath
Discover the project.json path if one exists for the project.
============================================================
-->
<Target Name="_GetProjectJsonPath"
Returns="$(_CurrentProjectJsonPath)">
<!-- Get project.json path -->
<!-- Skip this if the project style is already set. -->
<GetRestoreProjectJsonPathTask
ProjectPath="$(MSBuildProjectFullPath)"
Condition=" '$(RestoreProjectStyle)' == 'ProjectJson' OR '$(RestoreProjectStyle)' == '' ">
<Output TaskParameter="ProjectJsonPath" PropertyName="_CurrentProjectJsonPath" />
</GetRestoreProjectJsonPathTask>
</Target>
<!--
============================================================
_GetRestoreProjectStyle
Determine the project restore type.
============================================================
-->
<Target Name="_GetRestoreProjectStyle"
DependsOnTargets="_GetProjectJsonPath;CollectPackageReferences"
Returns="$(RestoreProjectStyle);$(PackageReferenceCompatibleProjectStyle)">
<!--
Older versions of MSBuild do not support the Count() item function which is an optimization. Expanding the
entire item list into a semicolon delimited string is slower but older versions of MSBuild don't support it so
use the older logic if necessary
-->
<PropertyGroup Condition="'$(MSBuildAssemblyVersion)' < '15.0'">
<_HasPackageReferenceItems Condition="'@(PackageReference)' != ''">true</_HasPackageReferenceItems>
</PropertyGroup>
<PropertyGroup Condition="'$(MSBuildAssemblyVersion)' >= '15.0'">
<_HasPackageReferenceItems Condition="@(PackageReference->Count()) > 0">true</_HasPackageReferenceItems>
</PropertyGroup>
<GetRestoreProjectStyleTask
HasPackageReferenceItems="$(_HasPackageReferenceItems)"
MSBuildProjectDirectory="$(MSBuildProjectDirectory)"
MSBuildProjectName="$(MSBuildProjectName)"
ProjectJsonPath="$(_CurrentProjectJsonPath)"
RestoreProjectStyle="$(RestoreProjectStyle)">
<Output TaskParameter="ProjectStyle" PropertyName="RestoreProjectStyle" />
<Output TaskParameter="IsPackageReferenceCompatibleProjectStyle" PropertyName="PackageReferenceCompatibleProjectStyle" />
</GetRestoreProjectStyleTask>
<PropertyGroup>
<_HasPackageReferenceItems />
</PropertyGroup>
</Target>
<!--
============================================================
EnableIntermediateOutputPathMismatchWarning
If using PackageReference, enable an MSBuild warning if BaseIntermediateOutputPath is set to something different
than MSBuildProjectExtensionsPath, because it may be unexpected that the assets and related files wouldn't be written
to the BaseIntermediateOutputPath.
============================================================
-->
<Target Name="EnableIntermediateOutputPathMismatchWarning" DependsOnTargets="_GetRestoreProjectStyle"
BeforeTargets="_CheckForInvalidConfigurationAndPlatform"
Condition="'$(RestoreProjectStyle)' == 'PackageReference'">
<PropertyGroup Condition="'$(EnableBaseIntermediateOutputPathMismatchWarning)' == ''">
<EnableBaseIntermediateOutputPathMismatchWarning>true</EnableBaseIntermediateOutputPathMismatchWarning>
</PropertyGroup>
</Target>
<!--
============================================================
_GetRestoreTargetFrameworksOutput
Read target frameworks from the project.
Non-NETCore project frameworks will be returned.
============================================================
-->
<Target Name="_GetRestoreTargetFrameworksOutput"
DependsOnTargets="_GetRestoreProjectStyle;_GetRestoreTargetFrameworkOverride"
Returns="@(_RestoreTargetFrameworksOutputFiltered)">
<PropertyGroup>
<_RestoreProjectFramework/>
<_TargetFrameworkToBeUsed Condition=" '$(_TargetFrameworkOverride)' == '' ">$(TargetFrameworks)</_TargetFrameworkToBeUsed>
</PropertyGroup>
<!-- For project.json projects target frameworks will be read from project.json. -->
<GetProjectTargetFrameworksTask
Condition=" '$(RestoreProjectStyle)' != 'ProjectJson'"
ProjectPath="$(MSBuildProjectFullPath)"
TargetFrameworks="$(_TargetFrameworkToBeUsed)"
TargetFramework="$(TargetFramework)"
TargetFrameworkMoniker="$(TargetFrameworkMoniker)"
TargetPlatformIdentifier="$(TargetPlatformIdentifier)"
TargetPlatformVersion="$(TargetPlatformVersion)"
TargetPlatformMinVersion="$(TargetPlatformMinVersion)">
<Output
TaskParameter="ProjectTargetFrameworks"
PropertyName="_RestoreProjectFramework" />
</GetProjectTargetFrameworksTask>
<ItemGroup Condition=" '$(_RestoreProjectFramework)' != '' ">
<_RestoreTargetFrameworksOutputFiltered Include="$(_RestoreProjectFramework.Split(';'))" />
</ItemGroup>
</Target>
<!--
============================================================
_GetRestoreTargetFrameworksAsItems
Read $(TargetFrameworks) from the project as items.
Projects that do not have $(TargetFrameworks) will noop.
If $(TargetFramework) is specified globally, it'll be preferred over $(TargetFrameworks)
============================================================
-->
<Target Name="_GetRestoreTargetFrameworksAsItems"
DependsOnTargets="_GetRestoreProjectStyle;_GetRestoreTargetFrameworkOverride"
Returns="@(_RestoreTargetFrameworkItems)">
<ItemGroup Condition=" '$(TargetFrameworks)' != '' AND '$(_TargetFrameworkOverride)' == '' ">
<_RestoreTargetFrameworkItems Include="$(TargetFrameworks.Split(';'))" />
</ItemGroup>
<ItemGroup Condition=" '$(TargetFrameworks)' != '' AND '$(_TargetFrameworkOverride)' != '' ">
<_RestoreTargetFrameworkItems Include="$(_TargetFrameworkOverride)" />
</ItemGroup>
</Target>
<!--
============================================================
_GetRestoreSettings
============================================================
-->
<Target Name="_GetRestoreSettings"
Condition=" '$(RestoreProjectStyle)' == 'PackageReference' OR '$(RestoreProjectStyle)' == 'ProjectJson' OR '$(RestoreProjectStyle)' == 'DotnetToolReference' OR '$(RestoreProjectStyle)' == 'PackagesConfig'"
DependsOnTargets="_GetRestoreSettingsOverrides;_GetRestoreSettingsCurrentProject;_GetRestoreSettingsAllFrameworks"
Returns="$(_OutputSources);$(_OutputPackagesPath);$(_OutputRepositoryPath);$(_OutputFallbackFolders);$(_OutputConfigFilePaths)">
<PropertyGroup Condition=" '$(RestoreSolutionDirectory)' == '' AND '$(RestoreProjectStyle)' == 'PackagesConfig' AND '$(SolutionDir)' != '*Undefined*'">
<RestoreSolutionDirectory>$(SolutionDir)</RestoreSolutionDirectory>
</PropertyGroup>
<!-- For transitive project styles, we rely on evaluating all the settings and including them in the dg spec to faciliate no-op restore-->
<GetRestoreSettingsTask
ProjectUniqueName="$(MSBuildProjectFullPath)"
RestoreSources="$(RestoreSources)"
RestorePackagesPath="$(RestorePackagesPath)"
RestoreRepositoryPath="$(RestoreRepositoryPath)"
RestoreFallbackFolders="$(RestoreFallbackFolders)"
RestoreConfigFile="$(RestoreConfigFile)"
RestoreRootConfigDirectory="$(RestoreRootConfigDirectory)"
RestoreSolutionDirectory="$(RestoreSolutionDirectory)"
RestoreSettingsPerFramework="@(_RestoreSettingsPerFramework)"
RestorePackagesPathOverride="$(_RestorePackagesPathOverride)"
RestoreRepositoryPathOverride="$(_RestoreRepositoryPathOverride)"
RestoreSourcesOverride="$(_RestoreSourcesOverride)"
RestoreFallbackFoldersOverride="$(_RestoreFallbackFoldersOverride)"
RestoreProjectStyle="$(RestoreProjectStyle)"
MSBuildStartupDirectory="$(MSBuildStartupDirectory)">
<Output
TaskParameter="OutputSources"
PropertyName="_OutputSources" />
<Output
TaskParameter="OutputPackagesPath"
PropertyName="_OutputPackagesPath" />
<Output
TaskParameter="OutputRepositoryPath"
PropertyName="_OutputRepositoryPath" />
<Output
TaskParameter="OutputFallbackFolders"
PropertyName="_OutputFallbackFolders" />
<Output
TaskParameter="OutputConfigFilePaths"
PropertyName="_OutputConfigFilePaths" />
</GetRestoreSettingsTask>
</Target>
<!--
============================================================
_GetRestoreSettingsCurrentProject
Generate items for a single framework.
============================================================
-->
<Target Name="_GetRestoreSettingsCurrentProject"
Condition=" '$(TargetFrameworks)' == '' AND '$(PackageReferenceCompatibleProjectStyle)' == 'true' "
DependsOnTargets="_GetRestoreSettingsPerFramework"
Returns="@(_RestoreSettingsPerFramework)">
</Target>
<!--
============================================================
_GetRestoreSettingsAllFrameworks
Generate items for all frameworks.
============================================================
-->
<Target Name="_GetRestoreSettingsAllFrameworks"
Condition=" '$(TargetFrameworks)' != '' AND '$(PackageReferenceCompatibleProjectStyle)' == 'true' "
DependsOnTargets="_GetRestoreTargetFrameworksAsItems;_GetRestoreProjectStyle"
Returns="@(_RestoreSettingsPerFramework)">
<!-- Read additional sources and fallback folders for each framework -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Projects="$(MSBuildProjectFullPath)"
Targets="_GetRestoreSettingsPerFramework"
Properties="TargetFramework=%(_RestoreTargetFrameworkItems.Identity);
$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreSettingsPerFramework" />
</MSBuild>
</Target>
<!--
============================================================
_GetRestoreSettingsPerFramework
Generate items with framework specific settings.
============================================================
-->
<Target Name="_GetRestoreSettingsPerFramework"
Returns="@(_RestoreSettingsPerFramework)">
<ItemGroup>
<_RestoreSettingsPerFramework Include="$([System.Guid]::NewGuid())">
<RestoreAdditionalProjectSources>$(RestoreAdditionalProjectSources)</RestoreAdditionalProjectSources>
<RestoreAdditionalProjectFallbackFolders>$(RestoreAdditionalProjectFallbackFolders)</RestoreAdditionalProjectFallbackFolders>
<RestoreAdditionalProjectFallbackFoldersExcludes>$(RestoreAdditionalProjectFallbackFoldersExcludes)</RestoreAdditionalProjectFallbackFoldersExcludes>
</_RestoreSettingsPerFramework>
</ItemGroup>
</Target>
<!--
============================================================
_GenerateRestoreProjectSpec
Generate a restore project spec for the current project.
============================================================
-->
<Target Name="_GenerateRestoreProjectSpec"
DependsOnTargets="_GetRestoreProjectStyle;_GetRestoreTargetFrameworksOutput;_GetRestoreSettings"
Returns="@(_RestoreGraphEntry)">
<!-- Determine the restore output path -->
<PropertyGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' OR '$(RestoreProjectStyle)' == 'ProjectJson' ">
<RestoreOutputPath Condition=" '$(RestoreOutputPath)' == '' ">$(MSBuildProjectExtensionsPath)</RestoreOutputPath>
</PropertyGroup>
<ConvertToAbsolutePath Paths="$(RestoreOutputPath)" Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' OR '$(RestoreProjectStyle)' == 'ProjectJson'">
<Output TaskParameter="AbsolutePaths" PropertyName="RestoreOutputAbsolutePath" />
</ConvertToAbsolutePath>
<!--
Determine project name for the assets file.
Highest priority: PackageId
If PackageId does not exist use: AssemblyName
If AssemblyName does not exist fallback to the project file name without the extension: $(MSBuildProjectName)
For non-PackageReference projects use only: $(MSBuildProjectName)
-->
<PropertyGroup>
<_RestoreProjectName>$(MSBuildProjectName)</_RestoreProjectName>
<_RestoreProjectName Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' AND '$(AssemblyName)' != '' ">$(AssemblyName)</_RestoreProjectName>
<_RestoreProjectName Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' AND '$(PackageId)' != '' ">$(PackageId)</_RestoreProjectName>
</PropertyGroup>
<!--
Determine project version for .NETCore projects
Default to 1.0.0
Use Version if it exists
Override with PackageVersion if it exists (same as pack)
-->
<PropertyGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' ">
<_RestoreProjectVersion>1.0.0</_RestoreProjectVersion>
<_RestoreProjectVersion Condition=" '$(Version)' != '' ">$(Version)</_RestoreProjectVersion>
<_RestoreProjectVersion Condition=" '$(PackageVersion)' != '' ">$(PackageVersion)</_RestoreProjectVersion>
</PropertyGroup>
<!-- Determine if this will use cross targeting -->
<PropertyGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' AND '$(TargetFrameworks)' != '' ">
<_RestoreCrossTargeting>true</_RestoreCrossTargeting>
</PropertyGroup>
<!-- Determine if ContentFiles should be written by NuGet -->
<PropertyGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' AND '$(_RestoreSkipContentFileWrite)' == '' ">
<_RestoreSkipContentFileWrite Condition=" '$(TargetFrameworks)' == '' AND '$(TargetFramework)' == '' ">true</_RestoreSkipContentFileWrite>
</PropertyGroup>
<!-- Write properties for the top level entry point -->
<ItemGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' ">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())">
<Type>ProjectSpec</Type>
<Version>$(_RestoreProjectVersion)</Version>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
<ProjectPath>$(MSBuildProjectFullPath)</ProjectPath>
<ProjectName>$(_RestoreProjectName)</ProjectName>
<Sources>$(_OutputSources)</Sources>
<FallbackFolders>$(_OutputFallbackFolders)</FallbackFolders>
<PackagesPath>$(_OutputPackagesPath)</PackagesPath>
<ProjectStyle>$(RestoreProjectStyle)</ProjectStyle>
<OutputPath>$(RestoreOutputAbsolutePath)</OutputPath>
<RuntimeIdentifiers>$(RuntimeIdentifiers);$(RuntimeIdentifier)</RuntimeIdentifiers>
<RuntimeSupports>$(RuntimeSupports)</RuntimeSupports>
<CrossTargeting>$(_RestoreCrossTargeting)</CrossTargeting>
<RestoreLegacyPackagesDirectory>$(RestoreLegacyPackagesDirectory)</RestoreLegacyPackagesDirectory>
<ValidateRuntimeAssets>$(ValidateRuntimeIdentifierCompatibility)</ValidateRuntimeAssets>
<SkipContentFileWrite>$(_RestoreSkipContentFileWrite)</SkipContentFileWrite>
<ConfigFilePaths>$(_OutputConfigFilePaths)</ConfigFilePaths>
<TreatWarningsAsErrors>$(TreatWarningsAsErrors)</TreatWarningsAsErrors>
<WarningsAsErrors>$(WarningsAsErrors)</WarningsAsErrors>
<WarningsNotAsErrors>$(WarningsNotAsErrors)</WarningsNotAsErrors>
<NoWarn>$(NoWarn)</NoWarn>
<RestorePackagesWithLockFile>$(RestorePackagesWithLockFile)</RestorePackagesWithLockFile>
<NuGetLockFilePath>$(NuGetLockFilePath)</NuGetLockFilePath>
<RestoreLockedMode>$(RestoreLockedMode)</RestoreLockedMode>
<_CentralPackageVersionsEnabled>$(_CentralPackageVersionsEnabled)</_CentralPackageVersionsEnabled>
<CentralPackageFloatingVersionsEnabled>$(CentralPackageFloatingVersionsEnabled)</CentralPackageFloatingVersionsEnabled>
<CentralPackageVersionOverrideEnabled>$(CentralPackageVersionOverrideEnabled)</CentralPackageVersionOverrideEnabled>
<CentralPackageTransitivePinningEnabled>$(CentralPackageTransitivePinningEnabled)</CentralPackageTransitivePinningEnabled>
<NuGetAudit>$(NuGetAudit)</NuGetAudit>
<NuGetAuditLevel>$(NuGetAuditLevel)</NuGetAuditLevel>
<NuGetAuditMode>$(NuGetAuditMode)</NuGetAuditMode>
<SdkAnalysisLevel>$(SdkAnalysisLevel)</SdkAnalysisLevel>
<UsingMicrosoftNETSdk>$(UsingMicrosoftNETSdk)</UsingMicrosoftNETSdk>
<RestoreUseLegacyDependencyResolver>$(RestoreUseLegacyDependencyResolver)</RestoreUseLegacyDependencyResolver>
</_RestoreGraphEntry>
</ItemGroup>
<!-- Use project.json -->
<ItemGroup Condition=" '$(RestoreProjectStyle)' == 'ProjectJson' ">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())">
<Type>ProjectSpec</Type>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
<ProjectPath>$(MSBuildProjectFullPath)</ProjectPath>
<ProjectName>$(_RestoreProjectName)</ProjectName>
<Sources>$(_OutputSources)</Sources>
<OutputPath>$(RestoreOutputAbsolutePath)</OutputPath>
<FallbackFolders>$(_OutputFallbackFolders)</FallbackFolders>
<PackagesPath>$(_OutputPackagesPath)</PackagesPath>
<ProjectJsonPath>$(_CurrentProjectJsonPath)</ProjectJsonPath>
<ProjectStyle>$(RestoreProjectStyle)</ProjectStyle>
<ConfigFilePaths>$(_OutputConfigFilePaths)</ConfigFilePaths>
</_RestoreGraphEntry>
</ItemGroup>
<!-- Use packages.config -->
<ItemGroup Condition=" '$(RestoreProjectStyle)' == 'PackagesConfig' ">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())">
<Type>ProjectSpec</Type>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
<ProjectPath>$(MSBuildProjectFullPath)</ProjectPath>
<ProjectName>$(_RestoreProjectName)</ProjectName>
<ProjectStyle>$(RestoreProjectStyle)</ProjectStyle>
<PackagesConfigPath Condition="Exists('$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName).config')">$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName).config</PackagesConfigPath>
<PackagesConfigPath Condition="Exists('$(MSBuildProjectDirectory)\packages.config')">$(MSBuildProjectDirectory)\packages.config</PackagesConfigPath>
<RestorePackagesWithLockFile>$(RestorePackagesWithLockFile)</RestorePackagesWithLockFile>
<NuGetLockFilePath>$(NuGetLockFilePath)</NuGetLockFilePath>
<RestoreLockedMode>$(RestoreLockedMode)</RestoreLockedMode>
<Sources>$(_OutputSources)</Sources>
<SolutionDir>$(SolutionDir)</SolutionDir>
<RepositoryPath>$(_OutputRepositoryPath)</RepositoryPath>
<ConfigFilePaths>$(_OutputConfigFilePaths)</ConfigFilePaths>
<PackagesPath>$(_OutputPackagesPath)</PackagesPath>
<TargetFrameworks>@(_RestoreTargetFrameworksOutputFiltered)</TargetFrameworks>
<NuGetAudit>$(NuGetAudit)</NuGetAudit>
<NuGetAuditLevel>$(NuGetAuditLevel)</NuGetAuditLevel>
</_RestoreGraphEntry>
</ItemGroup>
<!-- Non-NuGet type -->
<ItemGroup Condition=" '$(RestoreProjectStyle)' == 'Unknown' ">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())">
<Type>ProjectSpec</Type>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
<ProjectPath>$(MSBuildProjectFullPath)</ProjectPath>
<ProjectName>$(_RestoreProjectName)</ProjectName>
<ProjectStyle>$(RestoreProjectStyle)</ProjectStyle>
<TargetFrameworks>@(_RestoreTargetFrameworksOutputFiltered)</TargetFrameworks>
</_RestoreGraphEntry>
</ItemGroup>
</Target>
<!--
============================================================
_GenerateProjectRestoreGraph
Recursively walk project to project references.
============================================================
-->
<Target Name="_GenerateProjectRestoreGraph"
DependsOnTargets="
_GetRestoreProjectStyle;
_GenerateRestoreProjectSpec;
_GenerateRestoreDependencies"
Returns="@(_RestoreGraphEntry)">
<!-- Output from dependency targets -->
</Target>
<!--
============================================================
_GenerateRestoreDependencies
Generate items for package and project references.
============================================================
-->
<Target Name="_GenerateRestoreDependencies"
DependsOnTargets="_GenerateProjectRestoreGraphAllFrameworks;_GenerateProjectRestoreGraphCurrentProject"
Returns="@(_RestoreGraphEntry)">
</Target>
<!--
============================================================
_GenerateProjectRestoreGraphAllFrameworks
Walk dependencies for all frameworks.
============================================================
-->
<Target Name="_GenerateProjectRestoreGraphAllFrameworks"
Condition=" '$(TargetFrameworks)' != '' "
DependsOnTargets="_GetRestoreTargetFrameworksAsItems"
Returns="@(_RestoreGraphEntry)">
<!-- Get project and package references -->
<!-- Evaluate for each framework -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Projects="$(MSBuildProjectFullPath)"
Targets="_GenerateProjectRestoreGraphPerFramework"
Properties="TargetFramework=%(_RestoreTargetFrameworkItems.Identity);
$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreGraphEntry" />
</MSBuild>
</Target>
<!--
============================================================
_GenerateProjectRestoreGraphCurrentProject
Walk dependencies with the current framework.
============================================================
-->
<Target Name="_GenerateProjectRestoreGraphCurrentProject"
Condition=" '$(TargetFrameworks)' == '' "
DependsOnTargets="_GenerateProjectRestoreGraphPerFramework"
Returns="@(_RestoreGraphEntry)">
</Target>
<!--
============================================================
_GenerateProjectRestoreGraphPerFramework
Walk dependencies using $(TargetFramework)
============================================================
-->
<Target Name="_GenerateProjectRestoreGraphPerFramework"
DependsOnTargets="_GetRestoreProjectStyle;_CollectRestoreInputs"
Returns="@(_RestoreGraphEntry)">
<!-- Write out project references -->
<GetRestoreProjectReferencesTask
ProjectUniqueName="$(MSBuildProjectFullPath)"
ProjectReferences="@(ProjectReference)"
TargetFrameworks="$(TargetFramework)"
ParentProjectPath="$(MSBuildProjectFullPath)">
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestoreProjectReferencesTask>
<!-- Write out package references-->
<GetRestorePackageReferencesTask
Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' "
ProjectUniqueName="$(MSBuildProjectFullPath)"
PackageReferences="@(PackageReference)"
TargetFrameworks="$(TargetFramework)"
>
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestorePackageReferencesTask>
<!-- Write out central package versions -->
<GetCentralPackageVersionsTask
Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' AND '$(_CentralPackageVersionsEnabled)' == 'true' "
ProjectUniqueName="$(MSBuildProjectFullPath)"
CentralPackageVersions="@(PackageVersion)"
TargetFrameworks="$(TargetFramework)"
>
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetCentralPackageVersionsTask>
<!-- Write out package downloads -->
<GetRestorePackageDownloadsTask
Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' "
ProjectUniqueName="$(MSBuildProjectFullPath)"
PackageDownloads="@(PackageDownload)"
TargetFrameworks="$(TargetFramework)"
>
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestorePackageDownloadsTask>
<!-- Write out Framework References-->
<GetRestoreFrameworkReferencesTask
Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true' "
ProjectUniqueName="$(MSBuildProjectFullPath)"
FrameworkReferences="@(FrameworkReference)"
TargetFrameworks="$(TargetFramework)"
>
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestoreFrameworkReferencesTask>
<!-- Write out advisory suppressions-->
<GetRestoreNuGetAuditSuppressionsTask
ProjectUniqueName="$(MSBuildProjectFullPath)"
NuGetAuditSuppressions="@(NuGetAuditSuppress)"
TargetFrameworks="$(TargetFramework)"
>
<Output
TaskParameter="RestoreGraphItems"
ItemName="_RestoreGraphEntry" />
</GetRestoreNuGetAuditSuppressionsTask>
<!-- Write out target framework information -->
<ItemGroup Condition=" '$(PackageReferenceCompatibleProjectStyle)' == 'true'">
<_RestoreGraphEntry Include="$([System.Guid]::NewGuid())">
<Type>TargetFrameworkInformation</Type>
<ProjectUniqueName>$(MSBuildProjectFullPath)</ProjectUniqueName>
<PackageTargetFallback>$(PackageTargetFallback)</PackageTargetFallback>
<AssetTargetFallback>$(AssetTargetFallback)</AssetTargetFallback>
<TargetFramework>$(TargetFramework)</TargetFramework>
<TargetFrameworkIdentifier>$(TargetFrameworkIdentifier)</TargetFrameworkIdentifier>
<TargetFrameworkVersion>$(TargetFrameworkVersion)</TargetFrameworkVersion>
<TargetFrameworkMoniker>$(TargetFrameworkMoniker)</TargetFrameworkMoniker>
<TargetFrameworkProfile>$(TargetFrameworkProfile)</TargetFrameworkProfile>
<TargetPlatformMoniker>$(TargetPlatformMoniker)</TargetPlatformMoniker>
<TargetPlatformIdentifier>$(TargetPlatformIdentifier)</TargetPlatformIdentifier>
<TargetPlatformVersion>$(TargetPlatformVersion)</TargetPlatformVersion>
<TargetPlatformMinVersion>$(TargetPlatformMinVersion)</TargetPlatformMinVersion>
<CLRSupport>$(CLRSupport)</CLRSupport>
<RuntimeIdentifierGraphPath>$(RuntimeIdentifierGraphPath)</RuntimeIdentifierGraphPath>
<WindowsTargetPlatformMinVersion>$(WindowsTargetPlatformMinVersion)</WindowsTargetPlatformMinVersion>
</_RestoreGraphEntry>
</ItemGroup>
</Target>
<!--
============================================================
_GenerateRestoreProjectPathItemsCurrentProject
Get absolute paths for all project references.
============================================================
-->
<Target Name="_GenerateRestoreProjectPathItemsCurrentProject"
Condition=" '$(TargetFrameworks)' == '' "
DependsOnTargets="_GenerateRestoreProjectPathItemsPerFramework"
Returns="@(_RestoreProjectPathItems)">
</Target>
<!--
============================================================
_GenerateRestoreProjectPathItemsPerFramework
Get absolute paths for all project references.
============================================================
-->
<Target Name="_GenerateRestoreProjectPathItemsPerFramework"
Returns="@(_RestoreProjectPathItems)">
<!-- Get the absolute paths to all projects -->
<ConvertToAbsolutePath Paths="@(ProjectReference)">
<Output TaskParameter="AbsolutePaths" PropertyName="_RestoreGraphAbsoluteProjectPaths" />
</ConvertToAbsolutePath>
<ItemGroup>
<_RestoreProjectPathItems Include="$(_RestoreGraphAbsoluteProjectPaths)" />
</ItemGroup>
</Target>
<!--
============================================================
_GenerateRestoreProjectPathItems
Get all project references regardless of framework
============================================================
-->
<Target Name="_GenerateRestoreProjectPathItems"
DependsOnTargets="_GenerateRestoreProjectPathItemsAllFrameworks;_GenerateRestoreProjectPathItemsCurrentProject"
Returns="@(_CurrentRestoreProjectPathItems)">
<!-- Drop any duplicate items -->
<RemoveDuplicates
Inputs="@(_RestoreProjectPathItems)">
<Output
TaskParameter="Filtered"
ItemName="_CurrentRestoreProjectPathItems" />
</RemoveDuplicates>
</Target>
<!--
============================================================
_GenerateRestoreProjectPathItemsAllFrameworks
Get all project references regardless of framework
============================================================
-->
<Target Name="_GenerateRestoreProjectPathItemsAllFrameworks"
Condition=" '$(TargetFrameworks)' != '' "
DependsOnTargets="_GetRestoreTargetFrameworksAsItems"
Returns="@(_RestoreProjectPathItems)">
<!-- Get all project references for the current project -->
<!-- With SkipNonexistentTargets support -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' == 'true' "
BuildInParallel="$(RestoreBuildInParallel)"
Projects="$(MSBuildProjectFullPath)"
Targets="_GenerateRestoreProjectPathItemsPerFramework"
SkipNonexistentTargets="true"
SkipNonexistentProjects="true"
Properties="TargetFramework=%(_RestoreTargetFrameworkItems.Identity);
$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItems" />
</MSBuild>
<!-- Without SkipNonexistentTargets support -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' != 'true' "
Projects="$(MSBuildProjectFullPath)"
Targets="_GenerateRestoreProjectPathItemsPerFramework"
ContinueOnError="$(RestoreContinueOnError)"
Properties="TargetFramework=%(_RestoreTargetFrameworkItems.Identity);
$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItems" />
</MSBuild>
</Target>
<!--
============================================================
_GenerateRestoreProjectPathWalk
Recursively walk projects
============================================================
-->
<Target Name="_GenerateRestoreProjectPathWalk"
DependsOnTargets="_GenerateRestoreProjectPathItems"
Returns="@(_RestoreProjectPathItems)">
<!-- Walk project references -->
<!-- With SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' == 'true' "
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(_CurrentRestoreProjectPathItems)"
Targets="_GenerateRestoreProjectPathWalk"
SkipNonexistentTargets="true"
SkipNonexistentProjects="true"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_GenerateRestoreProjectPathWalkOutputs" />
</MSBuild>
<!-- Without SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' != 'true' "
Projects="@(_CurrentRestoreProjectPathItems)"
Targets="_GenerateRestoreProjectPathWalk"
ContinueOnError="$(RestoreContinueOnError)"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_GenerateRestoreProjectPathWalkOutputs" />
</MSBuild>
<!-- Include the current project in the result -->
<ItemGroup>
<_GenerateRestoreProjectPathWalkOutputs Include="$(MSBuildProjectFullPath)" />
</ItemGroup>
<!-- Remove duplicates -->
<RemoveDuplicates
Inputs="@(_GenerateRestoreProjectPathWalkOutputs)">
<Output
TaskParameter="Filtered"
ItemName="_RestoreProjectPathItems" />
</RemoveDuplicates>
</Target>
<!--
============================================================
_GetAllRestoreProjectPathItems
Get the full list of known projects.
This includes all child projects from all target frameworks.
============================================================
-->
<Target Name="_GetAllRestoreProjectPathItems"
DependsOnTargets="_FilterRestoreGraphProjectInputItems"
Returns="@(_RestoreProjectPathItems)">
<NuGetMessageTask Name="DeterminingProjectsToRestore" Importance="High" />
<!-- Walk projects -->
<!-- With SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' == 'true' "
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(FilteredRestoreGraphProjectInputItems)"
Targets="_GenerateRestoreProjectPathWalk"
SkipNonexistentTargets="true"
SkipNonexistentProjects="true"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItemsOutputs" />
</MSBuild>
<!-- Without SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' != 'true' "
Projects="@(FilteredRestoreGraphProjectInputItems)"
Targets="_GenerateRestoreProjectPathWalk"
ContinueOnError="$(RestoreContinueOnError)"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItemsOutputs" />
</MSBuild>
<!-- Remove duplicates -->
<RemoveDuplicates
Inputs="@(_RestoreProjectPathItemsOutputs)">
<Output
TaskParameter="Filtered"
ItemName="_RestoreProjectPathItemsWithoutDupes" />
</RemoveDuplicates>
<!-- Remove projects that do not support restore. -->
<!-- With SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' == 'true' "
BuildInParallel="$(RestoreBuildInParallel)"
Projects="@(_RestoreProjectPathItemsWithoutDupes)"
Targets="_IsProjectRestoreSupported"
SkipNonexistentTargets="true"
SkipNonexistentProjects="true"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItems" />
</MSBuild>
<!-- Without SkipNonexistentTargets -->
<MSBuild
Condition=" '$(RestoreUseSkipNonexistentTargets)' != 'true' "
Projects="@(_RestoreProjectPathItemsWithoutDupes)"
Targets="_IsProjectRestoreSupported"
ContinueOnError="$(RestoreContinueOnError)"
Properties="$(_GenerateRestoreGraphProjectEntryInputProperties)">
<Output
TaskParameter="TargetOutputs"
ItemName="_RestoreProjectPathItems" />
</MSBuild>
</Target>
<!--
============================================================
_GetRestoreSettingsOverrides
Get global property overrides that should be resolved
against the current working directory instead of the project.
This is done by calling into NuGet.targets in a new scope,
project properties will not be returned by the calls below.
============================================================
-->
<Target Name="_GetRestoreSettingsOverrides"
Returns="$(_RestorePackagesPathOverride);$(_RestoreRepositoryPathOverride);$(_RestoreSourcesOverride);$(_RestoreFallbackFoldersOverride)">
<!-- RestorePackagesPathOverride -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Condition=" '$(RestorePackagesPath)' != '' "
Projects="$(MSBuildThisFileFullPath)"
Targets="_GetRestorePackagesPathOverride">
<Output
TaskParameter="TargetOutputs"
PropertyName="_RestorePackagesPathOverride" />
</MSBuild>
<!-- RestoreRepositoryPathOverride -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Condition=" '$(RestoreRepositoryPathOverride)' != '' "
Projects="$(MSBuildThisFileFullPath)"
Targets="_GetRestoreRepositoryPathOverride">
<Output
TaskParameter="TargetOutputs"
PropertyName="_RestoreRepositoryPathOverride" />
</MSBuild>
<!-- RestoreSourcesOverride -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Condition=" '$(RestoreSources)' != '' "
Projects="$(MSBuildThisFileFullPath)"
Targets="_GetRestoreSourcesOverride">
<Output
TaskParameter="TargetOutputs"
PropertyName="_RestoreSourcesOverride" />
</MSBuild>
<!-- RestoreFallbackFoldersOverride -->
<MSBuild
BuildInParallel="$(RestoreBuildInParallel)"
Condition=" '$(RestoreFallbackFolders)' != '' "
Projects="$(MSBuildThisFileFullPath)"
Targets="_GetRestoreFallbackFoldersOverride">
<Output
TaskParameter="TargetOutputs"
PropertyName="_RestoreFallbackFoldersOverride" />
</MSBuild>
</Target>
<!--
============================================================
_GetRestorePackagesPathOverride
============================================================
-->
<Target Name="_GetRestorePackagesPathOverride"
Returns="$(_RestorePackagesPathOverride)">
<PropertyGroup>
<_RestorePackagesPathOverride>$(RestorePackagesPath)</_RestorePackagesPathOverride>
</PropertyGroup>
</Target>
<!--
============================================================
_GetRestoreRepositoryPathOverride
============================================================
-->
<Target Name="_GetRestoreRepositoryPathOverride"
Returns="$(_RestoreRepositoryPathOverride)">
<PropertyGroup>
<_RestorePackagesPathOverride>$(RestoreRepositoryPath)</_RestorePackagesPathOverride>
</PropertyGroup>
</Target>
<!--
============================================================
_GetRestoreSourcesOverride
============================================================
-->
<Target Name="_GetRestoreSourcesOverride"
Returns="$(_RestoreSourcesOverride)">
<PropertyGroup>
<_RestoreSourcesOverride>$(RestoreSources)</_RestoreSourcesOverride>
</PropertyGroup>
</Target>
<!--
============================================================
_GetRestoreFallbackFoldersOverride
============================================================
-->
<Target Name="_GetRestoreFallbackFoldersOverride"
Returns="$(_RestoreFallbackFoldersOverride)">
<PropertyGroup>
<_RestoreFallbackFoldersOverride>$(RestoreFallbackFolders)</_RestoreFallbackFoldersOverride>
</PropertyGroup>
</Target>
<!--
============================================================
_GetRestoreTargetFrameworkOverride
============================================================
-->
<Target Name="_GetRestoreTargetFrameworkOverride"
Condition=" '$(_DisableNuGetRestoreTargetFrameworksOverride)' != 'true' "
Returns="$(_TargetFrameworkOverride)">
<GetGlobalPropertyValueTask
PropertyName="TargetFramework"
Condition=" '$(TargetFrameworks)' != '' ">
<Output TaskParameter="GlobalPropertyValue" PropertyName="_TargetFrameworkOverride" />
</GetGlobalPropertyValueTask>
<!-- Only set the override if TargetFrameworks has not been overriden as well. In that case, prefer it. -->
</Target>
<!--
============================================================
_GetTargetFrameworkOverrides
============================================================
-->
<Target Name="_GetTargetFrameworkOverrides"
Returns="$(_TargetFrameworkOverride)">
<PropertyGroup>
<_TargetFrameworkOverride Condition=" '$(TargetFrameworks)' == '' ">$(TargetFramework)</_TargetFrameworkOverride>
</PropertyGroup>
</Target>
<!--
============================================================
_IsProjectRestoreSupported
Verify restore targets exist in the project.
============================================================
-->
<Target Name="_IsProjectRestoreSupported"
Returns="@(_ValidProjectsForRestore)">
<ItemGroup>
<_ValidProjectsForRestore Include="$(MSBuildProjectFullPath)" />
</ItemGroup>
</Target>
<!--
============================================================
Import NuGet.RestoreEx.targets if the MSBuild property 'RestoreEnableStaticGraph'
is 'true'. This file overrides the Restore target to use MSBuild Static Graph
to load and evaluate projects which is much faster.
This feature is not supported for NuGet.exe scenarios and NuGet.RestoreEx.targets
won't exist in that case.
============================================================
-->
<Import Project="NuGet.RestoreEx.targets" Condition="'$(RestoreUseStaticGraphEvaluation)' == 'true' And Exists('NuGet.RestoreEx.targets')" />
</Project>
|